CYCLE MAKEUP Sample Clauses

CYCLE MAKEUP. Function The function of the Cycle Makeup System is designed to supply and store high quality demineralized water for makeup to the heat recovery steam generator (HRSG) steam cycle. The Cycle Makeup System also supplies water for the combustion turbine water injection and combustion turbine water washing. Major Components The Cycle Makeup System consists of the following major components: o One 237,000 galloncondensate storage tank. o Two 100 percent capacity cycle makeup pumps designed for normal makeup to the cycle when water is not being injected into the combustion turbine. o One 100% capacity pump designed to handle makeup to the unit including water injection to the combustion turbine. o Piping, valves piping specialties and instrumentation. System Description The water supply to the Cycle Makeup System is provided from the cycle makeup treatment system. The demineralized water from the mixed bed exchangers discharges to the condensate storage tank. Two 100% capacity cycle makeup pumps are provided for normal system operations without water injection to the combustion turbine. The cycle makeup pumps take suction from the condensate storage tank. An automatic recirculation control valve is provided for each cycle -------------------------------------------------------------------------------- Proprietary Information Page 30 AES IRONWOOD CONTRACT FINAL ISSUE - OCTOBER 30, 1998 -------------------------------------------------------------------------------- makeup pump for minimum flow recirculation to prevent overheating and cavitation of the pumps during startup and low flow operation. A single 100% capacity cycle makeup pump is provided for system operations when water injection to the combustion turbine is required. The cycle makeup pumps supply makeup water to the steam cycle. Makeup water is introduced to the condenser. Normally either the A or B pump operates, and the other pump serves as backup. Should one pump fail, the backup pump is automatically started by the DCS. Condenser makeup flow is controlled by an automatic control valve located in the makeup supply piping near the condenser. Water for combustion turbine water injection, water washing and other optional demand requirements is supplied from a connection on the condenser makeup supply piping upstream of the control valve. Excess water in the condenser is returned to the condensate storage tank by a return pipe from the condensate system. An automatic control valve in the condensate re...
Sample 1Sample 2Sample 3
AutoNDA by SimpleDocs

Related to CYCLE MAKEUP

  • Loop Makeup Response Time - Electronic This report measures the average interval and the percent within the interval from the electronic submission of a Loop Makeup Service Inquiry (LMUSI) to the distribution of Loop Makeup information back to the CLEC. Exclusions Manually submitted inquiries Canceled Requests Business Rules The response interval starts when the CLEC’s Mechanized Loop Makeup Service Inquiry (LMUSI) is submitted electronically through the Operational Support Systems interface, TAG. It ends when BellSouth’s Loop Facility Assignment and Control System (LFACS) responds electronically to the CLEC with the requested Loop Makeup data via the TAG Interface. LSRs submitted via LENs will be reflected in the results for the TAG interface.

  • System Logging The system must maintain an automated audit trail which can 20 identify the user or system process which initiates a request for PHI COUNTY discloses to 21 CONTRACTOR or CONTRACTOR creates, receives, maintains, or transmits on behalf of COUNTY, 22 or which alters such PHI. The audit trail must be date and time stamped, must log both successful and 23 failed accesses, must be read only, and must be restricted to authorized users. If such PHI is stored in a 24 database, database logging functionality must be enabled. Audit trail data must be archived for at least 3 25 years after occurrence.

  • Switching System Hierarchy and Trunking Requirements For purposes of routing iNetworks traffic to Verizon, the subtending arrangements between Verizon Tandems and Verizon End Offices shall be the same as the Tandem/End Office subtending arrangements Verizon maintains for the routing of its own or other carriers’ traffic (i.e., traffic will be routed to the appropriate Verizon Tandem subtended by the terminating End Office serving the Verizon Customer). For purposes of routing Verizon traffic to iNetworks, the subtending arrangements between iNetworks Tandems and iNetworks End Offices shall be the same as the Tandem/End Office subtending arrangements that iNetworks maintains for the routing of its own or other carriers’ traffic.

  • Television Equipment Recycling Program If this Contract is for the purchase or lease of covered television equipment, then Contractor certifies that it is compliance with Subchapter Z, Chapter 361 of the Texas Health and Safety Code related to the Television Equipment Recycling Program.

  • Shift Rotation Routine shift rotation is not an approach to staffing endorsed by the Employer. Except for emergency situations where it may be necessary to provide safe patient care, shift rotation will not be utilized without mutual consent. If such an occasion should ever occur, volunteers will be sought first. If no one volunteers, the Employer will rotate shifts on an inverse seniority basis until the staff vacancies are filled.

  • System Upgrades The Connecting Transmission Owner shall procure, construct, install, and own the System Upgrade Facilities and System Deliverability Upgrades described in Attachment 6 of this Agreement. To the extent that design work is necessary in addition to that already accomplished in the Class Year Interconnection Facilities Study for the Interconnection Customer, the Connecting Transmission Owner shall perform or cause to be performed such work. If all the Parties agree, the Interconnection Customer may construct System Upgrade Facilities and System Deliverability Upgrades.

  • Start-Up and Synchronization Consistent with the mutually acceptable procedures of the Developer and Connecting Transmission Owner, the Developer is responsible for the proper synchronization of the Large Generating Facility to the New York State Transmission System in accordance with NYISO and Connecting Transmission Owner procedures and requirements.

  • Mileage Measurement Where required, the mileage measurement for LIS rate elements is determined in the same manner as the mileage measurement for V&H methodology as outlined in NECA Tariff No. 4.

  • Unbundled Channelization (Multiplexing) 5.7.1 To the extent NewPhone is purchasing DS1 or DS3 or STS-1 Dedicated Transport pursuant to this Agreement, Unbundled Channelization (UC) provides the optional multiplexing capability that will allow a DS1 (1.544 Mbps) or DS3 (44.736 Mbps) or STS-1 (51.84 Mbps) Network Elements to be multiplexed or channelized at a BellSouth central office. Channelization can be accomplished through the use of a multiplexer or a digital cross-connect system at the discretion of BellSouth. Once UC has been installed, NewPhone may request channel activation on a channelized facility and BellSouth shall connect the requested facilities via COCIs. The COCI must be compatible with the lower capacity facility and ordered with the lower capacity facility. This service is available as defined in NECA 4.

  • Synchronization The Licensor hereby grants limited synchronization rights for One (1) music video streamed online (Youtube, Vimeo, etc..) for up to 500,000 non-monetized video streams on all total sites. A separate synchronisation license will need to be purchased for distribution of video to Television, Film or Video game.

Time is Money Join Law Insider Premium to draft better contracts faster.