international standard means a standard adopted by an international standardisation organisation and made available to the general public;
national standard means a standard adopted by a national standardisation organisation and made available to the general public;
Operational Manual means the manual referred to in Section 3.03 of this Agreement;
Industrial maintenance coating means a high performance architectural coating, including primers, sealers, undercoaters, intermediate coats, and topcoats formulated for application to substrates, including floors, exposed to one or more of the following extreme environmental conditions listed below and labeled “For industrial use only;” “For professional use only;” “Not for residential use;” or “Not intended for residential use.”
Technical standard means a document that specifies design, predicted performance and operation and maintenance specifications for a material, device or method.
National Standards means the document entitled “National Standards for the Volatile Organic Compound Content of Canadian Commercial/Industrial Surface Coating Products Automotive Refinishing, October 1998, PN 1288" and published by the Canadian Council of Ministers of the Environment;
Sustainability Structuring Agent means X.X. Xxxxxx Securities LLC, in its capacity as sustainability structuring agent hereunder.
International Student means a student holding a student visa for the purpose of obtaining an education in Australia and includes a student on a study abroad or international exchange program;
Renewable Energy Standard means the minimum renewable energy capacity portfolio, if applicable, and the renewable energy credit portfolio required to be achieved under section 28 or former section 27.
Project Operational Manual means the manual to be adopted pursuant to Section 6.01 (b) of this Agreement and referred to in paragraph 1 of Schedule 4 to this Agreement, outlining policies, procurement and implementation procedures and monitoring guidelines for the Project;
Gestational carrier means an adult woman who enters into an agreement to have an embryo implanted in her and bear the resulting child for intended parents, where the embryo is conceived by using the egg and sperm of the intended parents.
Operational Control means Security monitoring, adjustment of generation and transmission resources, coordinating and approval of changes in transmission status for maintenance, determination of changes in transmission status for reliability, coordination with other Balancing Authority Areas and Reliability Coordinators, voltage reductions and load shedding, except that each legal owner of generation and transmission resources continues to physically operate and maintain its own facilities.
operational risk means the risk of loss for the individual portfolio resulting from inadequate internal processes and failures in relation to people and systems of the investment service provider or from external events, and includes legal and documentation risk and risk resulting from the trading, settlement and valuation procedures operated on behalf of the individual portfolio;
Operational Services the operational services described as such in the Services Description;
Digital Signal Level 0 (DS-0 means the lowest-level signal in the time division multiplex digital hierarchy, and represents a voice-grade channel operating at either the 56 Kbps or 64 Kbps transmission bit rates. There are twenty-four (24) DS-0 channels in a DS-1.
Good Utility Practice means any of the practices, methods and acts engaged in or approved by a significant portion of the North American electric utility industry during the relevant time period, or any of the practices, methods and acts which, in the exercise of reasonable judgment in light of the facts known at the time the decision was made, could have been expected to accomplish the desired result consistent with good business practices, reliability, safety and expedition. Good Utility Practice is not intended to be limited to the optimum practice, method, or act to the exclusion of all others, but rather to be acceptable practices, methods, or acts generally accepted by NERC.
Reliability Standard means a requirement to provide for reliable operation of the bulk power system, including without limiting the foregoing requirements for the operation of existing bulk power system facilities, including cybersecurity protection, and the design of planned additions or modifications to such facilities to the extent necessary for reliable operation of the bulk power system, but shall not include any requirement to enlarge bulk power system facilities or to construct new transmission capacity or generation capacity.
Good Utility Practices means any of the practices, methods and acts engaged in or approved by a significant portion of the electric utility industry during the relevant time period, or any of the practices, methods or acts which, in the exercise of reasonable judgment in light of the facts known at the time the decision was made, could have been expected to accomplish the desired result at a reasonable cost consistent with good business practices, reliability, safety and expedition. Good Utility Practices are not intended to be limited to the optimum practice, method or act to the exclusion of all others, but rather to be acceptable practices, methods or acts generally accepted in the region.
Prudent Utility Practices means those practices, methods, techniques and standards, that are generally accepted for use in electric utility industries taking into account conditions in India, and commonly used in prudent electric utility engineering and operations to design, engineer, construct, test, operate and maintain equipment lawfully, safely, efficiently and economically as applicable to power stations of the size, service and type of the Project, and that generally conform to the manufacturers' operation and maintenance guidelines.
Service Level Standards has the meaning ascribed thereto in Section 2.1 hereof.
Digital Signal Level 0 or "DS0" means the 64 Kbps zero-level signal in the time-division multiplex hierarchy.
Specifications and Standards means the specifications and standards relating to the quality, quantity, capacity and other requirements for the Project, as set forth in Schedule-D, and any modifications thereof, or additions thereto, as included in the design and engineering for the Project submitted by the Developer to, and expressly approved by, the Authority;
Designated operational area means a geographic area designated by the combatant commander or subordinate joint force commander for the conduct or support of specified military operations.
Base Load Generation Resource means a Generation Capacity Resource that operates at least 90 percent of the hours that it is available to operate, as determined by the Office of the Interconnection in accordance with the PJM Manuals.
Prudent Utility Practice means any of the practices, methods and acts engaged in or approved by a significant portion of the electric utility industry during the relevant time period, or any of the practices, methods, and acts which, in the exercise of reasonable judgment in light of the facts known at the time the decision was made, could have been expected to accomplish the desired result at a reasonable cost consistent with good business practices, reliability, safety, and expedition. Prudent Utility Practice is not intended to be limited to the optimum practice, method, or act to the exclusion of all others, but rather to be acceptable practices, methods, or acts, generally accepted in the region.
Reliability Coordinator Area means that portion of the Bulk Electric System under the purview of the Reliability Coordinator.