After installation Sample Clauses

After installation. After installation, the dummy position shall be adjusted so that: The dummy centre line and the Enhanced Child Restraint System centre line shall be aligned exactly with the centre line of the test bench. The arms of the dummy shall be positioned symmetrically. Elbows shall be positioned in such a way that the upper arms are closely aligned with the sternum. Hands shall be positioned on the thighs. Legs shall be positioned parallel to one another or at least symmetrically. For lateral impact, positive measures shall be taken to ensure the stability of the dummy is maintained until t0 and this shall be confirmed using video analysis. Any means used to stabilise the dummy before t0 shall not influence the dummy kinematics after t0. Because the foam of the test bench seat cushion will compress after installation of the Enhanced Child Restraint System, the dynamic test shall be conducted no more than 10 minutes after installation. To allow the test bench seat cushion to recover, the minimum period between two tests using the same test bench seat cushion shall be 20 minutes. Example for arm alignment: Arms are aligned with sternum Arms are not aligned with sternum
AutoNDA by SimpleDocs
After installation the Participant shall notify the LPC and return the Certificate of Completion to the LPC. Prior to parallel operation, the LPC may inspect the Qualifying System for compliance with standards which include a witness test. LPC must provide written authorization before Participant can begin parallel operation.
After installation. STAT CREW For Basketball runs on Windows-based PCs using standard keyboard input. The minimum system requirements are: CD-ROM drive for software installation MS Windows version XP or Vista Minimum 6 MB disk space available Windows compatible printer To install the full Windows and DOS software package:
After installation. If any product becomes defective after installation, within the meaning of our LIMITED WARRANTY FOR WOOD DOORS, Concept Millwork will agree, in addition to the above, to pay reasonable expenses for removing, re-hanging and refinishing. Such removal, re-hanging and refinishing, shall be performed only with the written approval of Concept Millwork, and after the cost of such work has been determined and approved. If the defect for which the product is being rejected was visible and apparent prior to installation, Concept Millwork cannot be responsible for any cost of removal, reinstallation or finishing of the product. Exceptions to coverage CONCEPT MILLWORK SHALL HAVE NO LIABILITY UNDER THIS WARRANTY UNLESS SUCH DOORS OR FRAMES HAVE BEEN HANDLED, STORED, FINISHED, INSTALLED AND MAINTAINED IN ACCORDANCE TO ESTABLISHED INDUSTRY STANDARDS. ALSO, ALL RECOMMENDATIONS SET FORTH IN APPENDIX II AND ANY CONCEPT MILLWORK WRITTEN INSTALLATION INSTRUCTIONS HAVE BEEN ADHERED TO AND SUBJECTED TO NORMAL USE. CONCEPT MILLWORK SHALL HAVE NO LIABILITY UNDER THIS WARRANTY FOR ANY FURTHER FIELD FINISHING OF SUCH DOORS OR FRAMES. This warranty does not apply if the defect or failure of the warranted product was caused by damage while in the possession of the consumer. CONCEPT MILLWORK’S SOLE RESPONSIBILITY IS AS STATED IN THIS WARRANTY, AND CONCEPT MILLWORK IS NOT LIABLE FOR CONSEQUENTIAL, INDIRECT OR INCIDENTAL DAMAGES.
After installation the Backflow Prevention Device shall be the sole and complete responsibility of Owner. Owner shall own the Backflow Prevention Device and shall be solely responsible for its operation, maintenance, repair, and replacement. In no event shall Authority have any responsibility for the expense, operation, maintenance, repair, or replacement of the Backflow Prevention Device nor shall Authority be responsible to Owner in any manner or fashion for any claims, damages, losses or expenses of whatsoever nature or kind in any way connected with or as a result of the Backflow Prevention Device and its operation or failure to operate as intended. Initials:
After installation. Party A shall organize to conduct the checking and acceptance. Both parties shall sign Memo of Checking and Acceptance for Installation (please see Annexure 3), if the software qualifies the checking and acceptance. If the software can operate properly and stably for 30 days after the execution of Memo of Checking and Acceptance for Installation, both parties shall sign Memo of Completion of Installation and Implementation Service (please see Annexure 4). It shall be deemed as qualified if Party A does not sign Memo of Checking and Acceptance for Installation without reasonable cause within 3 working days after installation.
AutoNDA by SimpleDocs
After installation. SDT shall perform systems testing to determine material conformity of the Software with the functionality described in Exhibit A. Hawaiian shall provide all reasonable and necessary assistance as requested by SDT during such systems testing.
After installation. After installing STATCREW, you should start the program and select default program options. Take special care to insure you have the appropriate moni- tor and printer types selected. You should also install the Stat Crew Control Panel (refer to Chapter 3 for instructions). The Windows installation creates a “STATCREW” program folder, and adds an icon to the folder to launch the STATCREW program menu. You can use the ALT+ENTER keyboard command to change the DOS display window from full- screen to a window on the desktop, and vice versa. Sample game files When you install STATCREW, a set of sample game files are copied onto your disk so you can easily generate some game and team reports before learning how to use the play-by-play scoring features. The software is initially in- stalled to point to the directory containing this set of sample game files. You might want to score additional plays at the end of this game, score a game from an old play-by-play, from a live practice/exhibition, or score a game from the TV to help you get a feel for how the play-by-play software works. Before scoring an actual game, create a new games directory to keep your “real” games separate from the sample games. Refer to Chapter 3 for details on how to set up your own games directories. Disk drives STATCREW requires approximately 6mb of disk space to install on your hard drive, and approximately 1mb of disk space to store a single season. Disk space is normally not an issue. Using on a network Although the software is not specifically designed to run on a network, it nor- mally functions properly if: Only one person is updating game files at any given time. If more than one person is adding or modifying game information at the same time, game index files and other files may be corrupted. Backup your files on a regular basis. Since the software is not designed for concurrent network use, this is an important step in making sure you can recover from unexpected situations.

Related to After installation

  • Installation Where installation is required, Contractor shall be responsible for placing and installing the product in the required locations at no additional charge, unless otherwise designated on the Contract or purchase order. Contractor’s authorized product and price list shall clearly and separately identify any additional installation charges. All materials used in the installation shall be of good quality and shall be free of defects that would diminish the appearance of the product or render it structurally or operationally unsound. Installation includes the furnishing of any equipment, rigging, and materials required to install or replace the product in the proper location. Contractor shall protect the site from damage and shall repair damages or injury caused during installation by Contractor or its employees or agents. If any alteration, dismantling, excavation, etc., is required to achieve installation, the Contractor shall promptly restore the structure or site to its original condition. Contractor shall perform installation work so as to cause the least inconvenience and interference with Customers and with proper consideration of others on site. Upon completion of the installation, the location and surrounding area of work shall be left clean and in a neat and unobstructed condition, with everything in satisfactory repair and order.

  • Alterations Tenant agrees that it will not (a) demolish or undertake any structural alterations of any of the buildings or other improvements erected upon or otherwise comprising the Demised Premises, without the prior written consent of Landlord or (b) make any other alterations which would change the character of the buildings or other improvements comprising the Demised Premises or which would weaken, impair or otherwise in any way affect the structural aspects of integrity of or lessen the value of the Demised Premises and/or the buildings and other improvements comprising the Demised Premises. With respect to any alterations permitted to be made by Tenant pursuant to this Article Ten, Tenant shall (a) pay all costs, expenses and charges thereof, (b) make the same in accordance with all applicable laws and building codes in a good and workmanlike manner, (c) cause the same to be performed by qualified contractors who shall not create any labor or other disturbance at the Demised Premises while performing same, (d) fully and completely indemnify and hold harmless Landlord from and against any mechanic’s liens or other liens or claims in connection with the making thereof and (e) by reason of such alterations, not thereby and (e) by reason of such alterations, not thereby reduce the economic value of the Demised Premises. All alterations, improvements and additions to the Demised Premises permitted to be made by Tenant hereunder, shall be made in accordance with all applicable laws and plans and specifications previously submitted to Landlord for Landlord’s approval, which approval shall not be unreasonably withheld or delayed, and, except for removable trade fixtures, shall at once when made or installed be deemed to have attached to the freehold and to have become the property of Landlord and shall remain for the benefit of Landlord at the end of the term or other expiration of this Lease in as good order and condition as they were when installed, reasonable wear and tear excepted. In the event in the making of such alteration, improvements and additions as herein provided, Tenant further agrees to indemnify and hold harmless Landlord from and against all costs, expenses, liens, claims and damages arising out of, or resulting from the undertaking or making of such alterations, improvements and additions.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!