Operating Transponder definition

Operating Transponder means a transponder that has not experienced a Transponder Unit Failure.
Sample 1Sample 2Sample 3
Operating Transponder means a transponder that has not experienced a Transponder Unit Failure;
Sample 1Sample 2Sample 3
Operating Transponder means a transponder that has not experienced a Transponder Unit Failure; “Ordinary Course of Business” means the ordinary and usual course of operations of the Business, as conducted by Skynet and its Subsidiaries consistent with past practice. “Other Skynet Satellites” means the three (3) Skynet Satellites referred to as “Telstar 10,” “Telstar 14” and “Telstar 18” as of the date hereof; “Outside Date” means the date that is the first anniversary of the Telesat Closing; “Owned Real Property” is defined in Section 3.1(o)(i); “Owned Satellites” is defined in Section 3.1(p)(i); “Parent” is defined in the preamble;
Sample 1

Examples of Operating Transponder in a sentence

  • Contractor shall not be liable for damages under this Article 15.2.2(b) where its failure to meet such propellant lifetime requirement is due to a malfunction of the Launch Vehicle operation or where its failure to meet the thirty (30) Satisfactorily Operating Transponder requirement is due to the Launch environment exceeding the ORION 2 Spacecraft on-ground test requirements as specified in Part 3(C).

  • A Successfully Operating Transponder is a Transponder which meets either or both of the following two criteria: PanAmSat and Boeing Property Information Subject to restrictions on Contract title page 13 Buyer _____ Contractor _____ [***] Filed separately with the Commission pursuant to a request for confidential treatment.


More Definitions of Operating Transponder

Operating Transponder means a Transponder that, at Closing has been determined based upon the results of the in-orbit testing contemplated pursuant to Section 4.3.9 to meet the applicable Satellite Performance Specifications, including through periods of eclipse, or that Buyer, using reasonable business judgment, and after examining all reasonable technical alternatives for correcting any failures of such Transponder to meet the Satellite Performance Specifications, determines can be used for its intended commercial communications purposes. In the event a component of Rainbow-1 fails, all applicable spare components available must be used before an affected Transponder ceases to be an Operating Transponder.
Sample 1

Related to Operating Transponder

  • Transponder means an access device used to gain entry to the parking facility;

  • Signaling Transfer Point (“STP”) means a signaling point that performs message routing functions and provides information for the routing of messages between signaling points within or between CCIS networks. An STP transmits, receives and processes CCIS messages.

  • INTER-CONNECTION POINT/ DELIVERY/ METERING POINT means a single point at 220kV or above, where the power from the Project(s) is injected into the identified ISTS Substation (including the dedicated transmission line connecting the Projects with the substation system) as specified in the RfS document. Metering shall be done at this interconnection point where the power is injected into. For interconnection with grid and metering, the WPDs shall abide by the relevant CERC/ SERC Regulations, Grid Code and Central Electricity Authority (Installation and Operation of Meters) Regulations, 2006 as amended and revised from time to time.

  • Capacity Transmission Injection Rights means the rights to schedule energy and capacity deliveries at a Point of Interconnection of a Merchant Transmission Facility with the Transmission System. Capacity Transmission Injection Rights may be awarded only to a Merchant D.C. Transmission Facility and/or Controllable A.C. Merchant Transmission Facilities that connects the Transmission System to another control area. Deliveries scheduled using Capacity Transmission Injection Rights have rights similar to those under Firm Point-to-Point Transmission Service or, if coupled with a generating unit external to the PJM Region that satisfies all applicable criteria specified in the PJM Manuals, similar to Capacity Interconnection Rights.

  • Modular building manufacturer means a person or corporation who owns or operates a

  • Continuous parameter monitoring system (CPMS means all of the equipment necessary to meet the data acquisition and availability requirements of the Prevention of Significant Deterioration program, to monitor process and control device operational parameters (for example, control device secondary voltages and electric currents) and other information (for example, gas flow rate, O2 or CO2 concentrations), and to record average operational parameter value(s) on a continuous basis.

  • Satellite means any satellite owned by the Issuer or any of its Restricted Subsidiaries and any satellite purchased by the Issuer or any of its Restricted Subsidiaries pursuant to the terms of a Satellite Purchase Agreement, whether such satellite is in the process of manufacture, has been delivered for launch or is in orbit (whether or not in operational service).

  • Attachment Facilities means the facilities necessary to physically connect a Customer Facility to the Transmission System or interconnected distribution facilities.

  • Built-Up Area and/or “Covered Area” in relation to a Flat shall mean the floor area of that Flat including the area of balconies and terraces, if any attached thereto, and also the thickness of the walls (external or internal) and the columns and pillars therein Provided That if any wall, column or pillar be common between two Flats, then one-half of the area under such wall column or pillar shall be included in the built-up area of each such Flat.

  • Continuous parameter monitoring system or "CPMS" means all of the equipment necessary to meet the data acquisition and availability requirements of this article, to monitor process and control device operational parameters (for example, control device secondary voltages and electric currents) and other information (for example, gas flow rate, O2 or CO2 concentrations), and to record average operational parameter value(s) on a continuous basis.

  • Installation Site means the site at which the Product is originally installed.

  • Interconnection Point means the point(s) of connection(s) at which the project is connected to the grid i.e. it shall be at 11 / 22 kV bus bar level of substation of MSEDCL.

  • Planned Downtime means planned downtime for upgrades and maintenance to the Services scheduled in advance of such upgrades and maintenance.

  • Interconnection Service means the physical and electrical interconnection of the Customer Facility with the Transmission System pursuant to the terms of Tariff, Part IV and Tariff, Part VI and the Interconnection Service Agreement entered into pursuant thereto by Interconnection Customer, the Interconnected Transmission Owner and Transmission Provider. Interconnection Service Agreement:

  • Pipelines means those pipelines within the Storage Facility that connect the Tanks to one another and to the receiving and delivery flanges of the Storage Facility.

  • Network Integration Transmission Service means the transmission service provided under Tariff, Part III.

  • Modular building retailer means any person who purchases or acquires a modular building from a

  • Interconnection Facilities means the Transmission Owner Interconnection Facilities and the Customer Interconnection Facilities.

  • Electrical Interconnection Facilities means the equipment and facilities required to safely and reliably interconnect a Facility to the transmission system of the Transmitting Utility, including the collection system between each Bloom System, transformers and all switching, metering, communications, control and safety equipment, including the facilities described in any applicable Interconnection Agreement.

  • Transmission Owner Attachment Facilities means that portion of the Transmission Owner Interconnection Facilities comprised of all Attachment Facilities on the Interconnected Transmission Owner’s side of the Point of Interconnection. Transmission Owner Interconnection Facilities:

  • Operating Area means those areas on-shore in India in which company or its affiliated company may from time to time be entitled to execute such services/operations.

  • Covered Building Service Contract means a contract or subcontract to provide Building Services to the City of Cambridge or any of its departments or subdivisions.

  • Customer Premises Equipment or "CPE" means equipment employed on the premises of a Person other than a Carrier to originate, route or terminate Telecommunications (e.g., a telephone, PBX, modem pool, etc.).

  • Reference Interconnection Offer or “RIO” means a document published by a service provider specifying terms and conditions on which the other service provider may seek interconnection with such service provider;

  • Exit Point means a border control post or any other place designated by a Member State where animals, falling within the scope of Regulation (EC) No 1/2005, leave the customs territory of the Union;

  • Participating Transmission Owner or “Participating TO” means an entity that (a) owns, operates and maintains transmission lines and associated facilities and/or has entitlements to use certain transmission lines and associated facilities and (b) has transferred to the CAISO operational control of such facilities and/or entitlements to be made part of the CAISO Grid.