Installation of pumps and pumping equipment definition

Installation of pumps and pumping equipment means the procedure employed in the placement and preparation for operation of pumps and pumping equipment, including all construction involved in making entrances to the well and establishing seals.
Installation of pumps and pumping equipment means the placement and preparation for operation of pumps and pumping equipment, including all construction involved in making entrance to the well, and establishing seals and repairs to existing installations.
Installation of pumps and pumping equipment means the procedure employed in the

Examples of Installation of pumps and pumping equipment in a sentence

  • Installation of pumps and pumping equipment means the selection of and the procedure employed in the placement and preparation for operation of pumps and pumping equipment.

  • Installation of pumps and pumping equipment shall mean the procedure employed in the placement and preparation for operation of pumps and pumping equipment at the water well location, including connecting all wiring to the first control and all construction or repair involved in making entrance to the water well, which involves the breaking of the well seal.

  • Installation of pumps and pumping equipment into water wells and well decommissioning must be performed by or under the supervision of a licensed PIC.

  • MINIMUM MONTHLY PAYMENT SCHEDULE IF YOUR HIGHEST BALANCE IS/WAS$0-$100$100-$250$251-$500$501-$750$751-$1000OVER $1001MINIMUM PAYMENT$20$40$60$80$10017% REBILLING CHARGE A periodic rebilling charge is imposed on account balances unpaid for more than 90 days after the first billing.

  • Installation of pumps and pumping equipment: The procedure employed in the placement and preparation for operation of pumps and pumping equipment, including all construction involved in making entrances to the well and to the building, establishing seals, installing pump piping, valves, wiring, electrical controls and tanks.

  • Installation of pumps and pumping equipment means the procedure employed in the placement, protection and preparation for operation of pumps and pumping equipment, including all construction involved in making entrance to the well and establishing seals.


More Definitions of Installation of pumps and pumping equipment

Installation of pumps and pumping equipment means the selection of, and procedure employed in the placement and preparation for operation of, pumps and pumping equipment, including any construction that is involved in making an entrance to the well and also means installing a pitless adapter, well cap, pump drop pipe, suction line, discharge line, water service line, or pressure tank.‌

Related to Installation of pumps and pumping equipment

  • Fuel burning equipment means any furnace, boiler, apparatus, stack and all associated equipment, used in the process of burning fuel.

  • Installation Site means the site at which the Product is originally installed.

  • Electrical equipment means underground equipment that contains dielectric fluid that is necessary for the operation of equipment such as transformers and buried electrical cable.

  • Building, structure, facility, or installation means all of the pollutant-emitting activities which belong to the same industrial grouping, are located on one or more contiguous or adjacent properties, and are under the control of the same person (or persons under common control) except the activities of any vessel. Pollutant-emitting activities shall be considered as part of the same industrial grouping if they belong to the same major group (i.e., which have the same two-digit code) as described in the Standard Industrial Classification Manual, 1972, as amended by the 1977 Supplement (U.S. Government Printing Office stock numbers 4101-0066 and 003-005-00176-0, respectively).

  • Port Cargo Handling Equipment means rubber-tired gantry cranes, straddle carriers, shuttle carriers, and terminal tractors, including yard hostlers and yard tractors that operate within ports.

  • Building Equipment shall have the meaning set forth in the Security Instrument.

  • Installation Works means, as the context so requires,

  • Installations means all property of any kind paid for by Landlord, all Alterations, all fixtures, and all partitions, hardware, built-in machinery, built-in casework and cabinets and other similar additions, equipment, property and improvements built into the Premises so as to become an integral part of the Premises, including, without limitation, fume hoods which penetrate the roof or plenum area, built-in cold rooms, built-in warm rooms, walk-in cold rooms, walk-in warm rooms, deionized water systems, glass washing equipment, autoclaves, chillers, built-in plumbing, electrical and mechanical equipment and systems, and any power generator and transfer switch.

  • Installation means that the System or a Subsystem as specified in the Contract is ready for Commissioning as provided in GCC Clause 26 (Installation).

  • water installation means the pipes and water fittings which are situated on any premises and ownership thereof vests in the owner thereof and used or intended to be used in connection with the use of water on such premises, and includes a pipe and water fitting situated outside the boundary of the premises, which either connects to the connection pipe relating to such premises or is otherwise laid with the permission of the municipality;

  • meter installation means the meter and, if so equipped, the instrument transformers, wiring, test links, fuses, lamps, loss of potential alarms, meters, data recorders, telecommunication equipment and spin-off data facilities installed to measure power past a meter point, provide remote access to the metered data and monitor the condition of the installed equipment;

  • Installation Work means the construction and installation of the System and the Start-up, testing and acceptance (but not the operation and maintenance) thereof; all performed by or for the Power Producer at the Premises.

  • Metering Equipment means all metering equipment installed at the metering points designated in the appropriate appendix to an Interconnection Service Agreement. Minimum State of Charge:

  • Customer Premises Equipment or "CPE" means equipment employed on the premises of a Person other than a Carrier to originate, route or terminate Telecommunications (e.g., a telephone, PBX, modem pool, etc.).

  • Type 3 Installation means any Technical Installation upon which none of the SW, or only a portion of the SW, deployed is licensed for Use with such TPD, and therefore a TPD is not deployed or running.

  • Erection, construction, remodeling, repairing means all types of work done on a particular building or work at the site thereof in the construction or development of the project, including without limitation, erecting, construction, remodeling, repairing, altering, painting, and decorating, the transporting of materials and supplies to or from the building or work done by the employees of the Contractor, Subcontractor, or Agent thereof, and the manufacturing or furnishing of

  • Type 1 Installation means any Technical Installation upon which all SW deployed is licensed for Use with, and is running on, such TPD;

  • Type 2 Installation means any Technical Installation upon which all SW deployed is licensed for Use with, but is not running on, such TPD; and,

  • Analytical x-ray equipment means equipment used for x-ray diffraction or fluorescence analysis.

  • Nuclear installation means any installation of such class or description as may be prescribed by regulations made by the relevant Secretary of State from time to time by statutory instrument, being an installation designed or adapted for:

  • Construction waste means solid waste which is produced or generated during construction, remodeling, or repair of pavements, houses, commercial buildings, and other structures. Construction wastes include, but are not limited to lumber, wire, sheetrock, broken brick, shingles, glass, pipes, concrete, paving materials, and metal and plastics if the metal or plastics are a part of the materials of construction or empty containers for such materials. Paints, coatings, solvents, asbestos, any liquid, compressed gases or semi-liquids and garbage are not construction wastes.

  • Tight-fitting facepiece means a respiratory inlet covering that forms a complete seal with the face.

  • Communications Equipment means the communications equipment of the Licensee and its affiliates, including, without limitation, cabinets, racks, electronic equipment and other similar equipment.

  • Loose-fitting facepiece means a respiratory inlet covering that is designed to form a partial seal with the face.

  • CONSTRUCTION EQUIPMENT means all appliances and equipment of whatsoever nature for the use in or for the execution, completion operation or maintenance of the work unless intended to form part of permanent work.

  • Operating Equipment means furniture, furnishings, special lighting fixtures, carpeting, draperies, decorations or other special finishing work, signs, appliances and trade fixtures and equipment that is furnished, installed or used by the Contractor in its operations on the Airport. It does not include Fixed Improvements, or repair or maintenance of Operating Equipment or Fixed Improvements or displays or decorations that are of a seasonal or temporary promotional nature.