Loose-fitting facepiece definition

Loose-fitting facepiece means a respiratory inlet covering that is designed to form a partial seal with the face.
Loose-fitting facepiece means a respiratory inlet covering that is designed to form a partial seal with the face. "Lost or missing source of radiation" means licensed [or registered] source of radiation whose location isunknown. This definition includes, but is not limited to, radioactive material that has been shipped but has notreached its planned destination and whose location cannot be readily traced in the transportation system. "Major processor" means a user processing, handling, or manufacturing radioactive material exceeding Type Aquantities as unsealed sources or material, or exceeding 4 times Type B quantities as sealed sources, butdoes not include nuclear medicine programs, universities, industrial radiographers, or small industrial programs. Type A and B quantities are defined in T.2 of these regulations.
Loose-fitting facepiece means a respiratory inlet covering that is designed to form a

More Definitions of Loose-fitting facepiece

Loose-fitting facepiece means a respiratory inlet covering that is designed to form a partial seal
Loose-fitting facepiece means a respiratory inlet covering that is designed to form a partial seal with the face. "Lung class", refer to "Class".
Loose-fitting facepiece means a respiratory inlet covering that is
Loose-fitting facepiece means a respiratory inlet covering that is designed to form a partial seal with the face.28 TITLE 16 HEALTH AND SAFETYDELAWARE ADMINISTRATIVE CODE

Related to Loose-fitting facepiece

  • Tight-fitting facepiece means a respiratory inlet covering that forms a complete seal with the face.

  • Filtering facepiece (dust mask) means a negative pressure particulate respirator with a filter as an integral part of the facepiece or with the entire facepiece composed of the filtering medium, not equipped with elastomeric sealing surfaces and adjustable straps.

  • Massive Multiauthor Collaboration Site (or “MMC Site”) means any World Wide Web server that publishes copyrightable works and also provides prominent facilities for anybody to edit those works. A public wiki that anybody can edit is an example of such a server. A “Massive Multiauthor Collaboration” (or “MMC”) contained in the site means any set of copyrightable works thus published on the MMC site.

  • Cannabis testing facility means an entity registered by

  • Pneumatic tire means every tire in which compressed air is designed to support the load.

  • Dusting aid means a product designed or labeled to assist in removing dust and other soils from floors and other surfaces without leaving a wax or silicone based coating. “Dusting Aid” does not include “Pressurized Gas Duster.”

  • Negative pressure respirator (tight fitting) means a respirator in which the air pressure inside the facepiece is negative during inhalation with respect to the ambient air pressure outside the respirator.

  • Landing Gear means the installed main and nose landing gear, components and their associated actuators, side braces and parts.

  • Load Signalling Equipment means the equipment (which may include, but is not limited to, ripple injection plant) for the purpose of sending control signals to Load Control Equipment;

  • Mist spray adhesive means any aerosol which is not a special purpose spray adhesive and which delivers a particle or mist spray, resulting in the formation of fine, discrete particles that yield a generally uniform and smooth application of adhesive to the substrate.

  • Plasma arc incinerator means any enclosed device using a high intensity electrical discharge or arc as a source of heat followed by an afterburner using controlled flame combustion and which is not listed as an industrial furnace.

  • Accessory dwelling unit means an attached or a detached residential dwelling unit which provides complete independent living facilities for one or more persons. It shall include permanent provisions for living, sleeping, eating, cooking, and sanitation on the same parcel as the single-family dwelling is situated. An accessory dwelling unit also includes the following:

  • Permanent radiographic installation means an enclosed shielded room, cell, or vault, not located at a temporary jobsite, in which radiography is performed.

  • Membrane filtration means a pressure or vacuum driven separation process in which particulate matter larger than 1 micrometer is rejected by an engineered barrier, primarily through a size-exclusion mechanism, and which has a measurable removal efficiency of a target organism that can be verified through the application of a direct integrity test. This definition includes the common membrane technologies of microfiltration, ultrafiltration, nanofiltration, and reverse osmosis.

  • stacked townhouse means a building, other than a townhouse or apartment building, containing at least 3 dwelling units, each dwelling unit being separated from the other vertically and/or horizontally, and each dwelling unit having an entrance to grade shared with no more than 3 other units;

  • motor cycle means any two-wheeled vehicle, with or without side-car, which is equipped with a propelling engine. Contracting Parties may also treat as motor cycles in their domestic legislation three-wheeled vehicles whose unladen mass does not exceed 400 kg. The term "motor cycle" does not include mopeds, although Contracting Parties may treat mopeds as motor cycles for the purpose of the Convention.

  • Type 3 Installation means any Technical Installation upon which none of the SW, or only a portion of the SW, deployed is licensed for Use with such TPD, and therefore a TPD is not deployed or running.

  • Non-Administrator Skilled Nursing Facility means a Skilled Nursing Facility which does not have an agreement with the Claim Administrator or another Blue Cross and/or Blue Shield Plan but has been certified in accordance with guidelines established by Medicare.

  • Type 1 Installation means any Technical Installation upon which all SW deployed is licensed for Use with, and is running on, such TPD;

  • Faux finishing coating means a coating labeled and formulated as a stain or a glaze to create artistic effects including, but not limited to, dirt, old age, smoke damage, and simulated marble and wood grain.

  • Tanning facility means a place that provides access to tanning devices for compensation.

  • Fuel burning equipment means equipment whose primary purpose is the production of energy or power from the combustion of any fuel. The equipment is generally used for, but not limited to, heating water, generating or circulating steam, heating air as in warm air furnace, or furnishing process heat by transferring energy by fluids or through process vessel walls.

  • General purpose adhesive remover means a product designed or labeled to remove cyanoacrylate adhesives as well as non-reactive adhesives or residue from a variety of substrates. “General Purpose Adhesive Remover” includes, but is not limited to, products that remove thermoplastic adhesives; pressure sensitive adhesives; dextrine or starch-based adhesives; casein glues; rubber or latex-based adhesives; as well as products that remove stickers; decals; stencils; or similar materials. “General Purpose Adhesive Remover” does not include “Floor or Wall Covering Adhesive Remover.”

  • Specialty adhesive remover means a product designed to remove reactive adhesives from a variety of substrates. Reactive adhesives include adhesives that require a hardener or catalyst in order for the bond to occur. Examples of reactive adhesives include, but are not limited to: epoxies; urethanes; silicones. “Specialty Adhesive Remover” does not include “Gasket or Thread Locking Adhesive Remover.”

  • Engine degreaser means a cleaning product designed to remove grease, grime, oil and other contaminants from the external surfaces of engines and other mechanical parts.