Installation Acceptance Test definition

Installation Acceptance Test means verifying the installation and configuration of all system equipment at its final/permanent location along with verifying basic functionality of all components.
Sample 1Sample 2

Examples of Installation Acceptance Test in a sentence

  • The Contractor shall submit a plan for the Installation Acceptance Test at the Final Design Review.

  • The path then follows Elevator Field Installation Acceptance Test (FIAT), Simulated Integrated Systems Test (SIST) and Final Systems Integrated Test (FSIT) at 96th Street Station through November 11, 2016.

  • Installation Acceptance Test Report will be produced at the end of the test.

  • All testing will be in accordance with the approved test plans for the Factory Acceptance Test, Field Installation Acceptance Test and the 30 Day Operational Test.

  • Cable Installation Acceptance TestThe Cable Installation Acceptance Test (Installation Test) is similar to the Cable Reel Acceptance Test except the Installation Test is conducted from both ends of the fiber.

  • The path then follows Elevator Field Installation Acceptance Test (FIAT), Simulated Integrated Systems Test (SIST) and Final Systems Integrated Test (FSIT) at 96th Street Station through November 10, 2016.

  • Note: FAT (Factory Acceptance Test), FIAT (Field Installation Acceptance Test), FIST (Facility Integrated Systems Test), FSIT (Final System Integration Test), SIT (Systems Integration Test)This tabulation generally indicates that greater attention needs to be directed towards the approval process associated with the submittal of the procedures.ConclusionsMTACC has used the risk management process to assist in identifying potential cost/schedule risks to the project and develop mitigation strategies.

  • Tests that will be performed include, but are not limited to, Factory Acceptance Tests (FAT), Field Installation Acceptance Test (FIAT), Facilities Integrated Systems Testing (FIST), and Systems Integrated Testing (SIT).The System Test Program is a commissioning process that is designed to ensure that the project will meet the design requirements.

  • The Field Installation Acceptance Test shall be performed on the final installed equipment, properly connected, configured, and interfaced to the actual field devices.

  • Tests that will be performed include, but are not limited to Factory Acceptance Tests (FAT), Field Installation Acceptance Test (FIAT), Facilities Integrated Systems Testing (FIST), and Systems Integrated Testing (SIT).The Systems Test Program is a commissioning process that is designed to ensure that the project will meet the design requirements.

Related to Installation Acceptance Test

  • Acceptance Test is a test of the Features executed by the Customer to prepare the acceptance.

  • Acceptance Testing mean the tests, reviews and other activities that are performed by or on behalf of Agency to determine whether the Deliverables meet the Acceptance Criteria or otherwise satisfy the Agency, as determined by the Agency in its sole discretion.

  • Acceptance Tests means those tests performed during the Performance Period which are intended to determine compliance of Equipment and Software with the specifications and all other Attachments incorporated herein by reference and to determine the reliability of the Equipment.

  • Operational Acceptance Tests means the tests specified in the Technical Requirements and Agreed Project Plan to be carried out to ascertain whether the System, or a specified Sub system, is able to attain the functional and performance requirements specified in the Technical Requirements and Agreed Project Plan, in accordance with the provisions of GCC Clause 27.2 (Operational Acceptance Test).

  • Installation Work means the construction and installation of the System and the Start-up, testing and acceptance (but not the operation and maintenance) thereof; all performed by or for the Power Producer at the Premises.

  • Maintenance Test means the maintenance test set out in Clause 12.1 (Maintenance Test).

  • Installation Site means the site at which the Product is originally installed.

  • Installation Date means the date specified in the Statement of Work by which the Contractor must have the ordered Equipment ready (certified) for use by the State.

  • meter installation means the meter and, if so equipped, the instrument transformers, wiring, test links, fuses, lamps, loss of potential alarms, meters, data recorders, telecommunication equipment and spin-off data facilities installed to measure power past a meter point, provide remote access to the metered data and monitor the condition of the installed equipment;

  • Type 1 Installation means any Technical Installation upon which all SW deployed is licensed for Use with, and is running on, such TPD;

  • TENDER SPECIFICATION means “Specific conditions, technical specifications, appendices, site information and drawing pertaining to the work in which the tenderers are required to submit their offer. Individual specification number will be assigned to each tender specification.

  • Type 2 Installation means any Technical Installation upon which all SW deployed is licensed for Use with, but is not running on, such TPD; and,

  • Installation Works means, as the context so requires,

  • Acceptance Test Document means a document, which defines procedures for testing the functioning of installed system. The document will be finalized with the contractor within 7 days of issuance of the Letter of Award.

  • Building, structure, facility, or installation means all of the pollutant-emitting activities which belong to the same industrial grouping, are located on one or more contiguous or adjacent properties, and are under the control of the same person (or persons under common control) except the activities of any vessel. Pollutant-emitting activities shall be considered as part of the same industrial grouping if they belong to the same major group (i.e., which have the same two-digit code) as described in the Standard Industrial Classification Manual, 1972, as amended by the 1977 Supplement (U.S. Government Printing Office stock numbers 4101-0066 and 003-005-00176-0, respectively).

  • Wind Turbine means a mechanical/electrical system that converts the kinetic energy of blowing wind into mechanical or electric power.

  • Nuclear installation means any installation of such class or description as may be prescribed by regulations made by the relevant Secretary of State from time to time by statutory instrument, being an installation designed or adapted for:

  • Type 3 Installation means any Technical Installation upon which none of the SW, or only a portion of the SW, deployed is licensed for Use with such TPD, and therefore a TPD is not deployed or running.

  • technical specification means, with respect to any Software, the document setting forth the technical specifications for such Software and included in the Statement of Work.

  • Installation means that the System or a Subsystem as specified in the Contract is ready for Commissioning as provided in GCC Clause 26 (Installation).

  • water installation means the pipes and water fittings which are situated on any premises and ownership thereof vests in the owner thereof and used or intended to be used in connection with the use of water on such premises, and includes a pipe and water fitting situated outside the boundary of the premises, which either connects to the connection pipe relating to such premises or is otherwise laid with the permission of the municipality;

  • TENDER SPECIFICATIONS means the Scope of Work, Special Instructions / Conditions, Technical specifications/requirement , Appendices, Site Information and drawings pertaining to the work and any other relevant reference in the Tender Document for which the Bidder are required to submit their offer.

  • Generation Interconnection Feasibility Study means a study conducted by the Transmission Provider (in coordination with the affected Transmission Owner(s)) in accordance with Tariff, Part IV, section 36.2.

  • Standard Installation means the installation of drop cable to a customer’s premise where the distance from the point of entry into the building being served is less than 150 feet from the active cable television system plant.

  • Installation Services means all those services ancillary to the supply of the Plant and Equipment for the Facilities, to be provided by the Contractor under the Contract; e.g., transportation and provision of marine or other similar insurance, inspection, expediting, site preparation works (including the provision and use of Contractor’s Equipment and the supply of all construction materials required), installation, testing, pre-commissioning, commissioning, operations, maintenance, the provision of operations and maintenance manuals, training, etc.

  • Subproject means a development activity proposed by a Beneficiary under Part A.2 (d) of the Project and financed or to be financed through a Subproject Grant (as hereinafter defined) made out of the proceeds of the Development Credit;