Hydraulic gradient definition

Hydraulic gradient means the rate of change of total head per unit distance of flow in a given direction.
Hydraulic gradient means the head loss per unit length where the head loss is expressed in terms of the unit length so as to produce a dimensionless value.
Hydraulic gradient means the slope of the water table or potentiometric surface, calculated by dividing the change in hydraulic head between two points by the horizontal distance between the points in the direction of groundwater flow.

Examples of Hydraulic gradient in a sentence

  • Hydraulic gradient calculations shall account for all head losses that may occur in the storm sewer line.

  • Frictional loss in pipe-Chezy formula and Daycy's formula.ix) Hydraulic gradient and total energy line.

  • Hydraulic gradient (Examples: groundwater elevations, flow direction)b.

  • A RFEDP donation of USD 20,000 approximately enabled Imbita to start offering credit to self help groups based on peer guarantee and to broker a partnership with MTN which led to the introduction of digital savings and loan disbursement.

  • Hydraulic gradient is the rate of change in total head per unit distance of flow in a given direction.

  • Hydraulic gradient for public storm sewers shall be based on a ten year storm and a five year storm for private storm sewers.

  • Hydraulic gradient = 0.00421 ft/ft.Figure 13 illustrates the hydraulic gradient of the Chilson aquifer at the location of well 41.

  • Hydraulic gradient of 0.00631 ft/ft.Because wells 42 and 704 are located close together, for the purposes of the CZA these two wells were considered to be one well, flowing at the combined rate of both wells.

  • Hydraulic gradient = 0.00646 ft/ft.Aquifer Thickness: The aquifer thickness at the location of each well was calculated based on well records, if available, or the aquifer isopach maps included in the Class III Permit Application.

  • Where drainage drywells are proposed as stormwater infiltration infrastructure, the required drainage drywell wall surface areas shall be determined using Darcy's Empirical Law as follows: Where: Q = Design flow in m3/s; A = Cross-sectional area of soil through which flow takes place in m2; K = Coefficient of permeability of receiving soils in m/s; i = Hydraulic gradient within proximity to the drywell.


More Definitions of Hydraulic gradient

Hydraulic gradient means the change in hydraulic head per unit distance.
Hydraulic gradient means the change in hydraulic pressure per unit of distance in a given direction.
Hydraulic gradient means the change in hydraulic head per unit distance. [(31)] (37) “Hydraulic head” means the elevation to which water rises in a piezometer or a well.
Hydraulic gradient means a change in the static pressure of ground water, ex- pressed in terms of the height of water above a datum, per unit of distance in a given direction. Hydrologic process means any hydro- logic phenomenon that exhibits a con- tinuous change in time, whether slow or rapid. Hydrologic properties means those properties of a rock that govern the en- trance of water and the capacity to hold, transmit, and deliver water, such as porosity, effective porosity, specific retention, permeability, and the direc- tions of maximum and minimum permeabilities. Igneous activity means the emplace- ment (intrusion) of molten rock mate- rial (magma) into material in the Earth’s crust or the expulsion (extru- sion) of such material onto the Earth’s surface or into its atmosphere or sur- face water. Isolation means inhibiting the trans- port of radioactive material so that the amounts and concentrations of this material entering the accessible envi- ronment will be kept within prescribed limits. Likely means processing or displaying the qualities, characteristics, or at- tributes that provide a reasonable basis for confidence that what is expected in- deed exists or will occur. Lithosphere means the solid part of the Earth, including any ground water contained within it. Member of the public means any indi- vidual who is not engaged in operations involving the management, storage, and disposal of radioactive waste. A worker so engaged is a member of the public except when on duty at the geo- logic-repository operations area.
Hydraulic gradient means the slope of the water table.
Hydraulic gradient means slope of the water table.

Related to Hydraulic gradient

  • Hydraulic lift tank means a tank holding hydraulic fluid for a closed-loop mechanical system that uses compressed air or hydraulic fluid to operate lifts, elevators, and other similar devices.

  • Hydraulic fracturing means the fracturing of underground rock formations, including shale and non-shale formations, by manmade fluid-driven techniques for the purpose of stimulating oil, natural gas, or other subsurface hydrocarbon production.

  • Flue means a passage for conveying the products of combustion from a gas appliance to the external air.

  • Plasma arc incinerator means any enclosed device using a high intensity electrical discharge or arc as a source of heat followed by an afterburner using controlled flame combustion and which is not listed as an industrial furnace.

  • Engine degreaser means a cleaning product designed to remove grease, grime, oil and other contaminants from the external surfaces of engines and other mechanical parts.

  • heat pump means a machine, a device or installation that transfers heat from natural surroundings such as air, water or ground to buildings or industrial applications by reversing the natural flow of heat such that it flows from a lower to a higher temperature. For reversible heat pumps, it may also move heat from the building to the natural surroundings;

  • Incineration means an engineered process involving burning or combustion of solid waste to thermally degrade waste materials at high temperatures;

  • medium voltage means the set of nominal voltage levels that lie above low voltage and below high voltage in the range of 1 kV to 44 kV;

  • Nitrogen oxides means nitric oxide and nitrogen dioxide, expressed as nitrogen dioxide (NO2);

  • Geothermal fluid means water in any form at temperatures greater than 120

  • Exfiltration means any unauthorized release of data from within an information system. This includes copying the data through covert network channels or the copying of data to unauthorized media.

  • Incinerator means any enclosed device that:

  • Diatomaceous earth filtration means a process resulting in substantial particulate removal in which a precoat cake of diatomaceous earth filter media is deposited on a support membrane (septum), and while the water is filtered by passing through the cake on the septum, additional filter media known as body feed is continuously added to the feed water to maintain the permeability of the filter cake.

  • Infiltration means water other than wastewater that enters a sewer system (including sewer system and foundation drains) from the ground through such means as defective pipes, pipe joints, connections, or manholes. Infiltration does not include, and is distinguished from, inflow.

  • combustible waste means non-biodegradable, non- recyclable, non-reusable, non-hazardous solid waste having minimum calorific value exceeding 1500 kcal/kg and excluding chlorinated materials like plastic, wood pulp, etc.;

  • Fluid means material or substance which flows or moves whether in a semisolid, liquid, sludge, gas, or any other form or state.

  • Pressurized gas duster means a pressurized product labeled to remove dust from a surface solely by means of mass air or gas flow, including surfaces such as photographs, photographic film negatives, computer keyboards, and other types of surfaces that cannot be cleaned with solvents. “Pressurized Gas Duster” does not include “Dusting Aid.”

  • High global warming potential hydrofluorocarbons means any hydrofluorocarbons in a particular end use for which EPA’s Significant New Alternatives Policy (SNAP) program has identified other acceptable alternatives that have lower global warming potential. The SNAP list of alternatives is found at 40 CFR part 82, subpart G, with supplemental tables of alternatives available at (http://www.epa.gov/snap/ ).

  • Emitter means a drip irrigation emission device that delivers water slowly from the system to the soil.

  • Finished water means the water that is introduced into the distribution system of a public water system and is intended for distribution and consumption without further treatment, except as treatment necessary to maintain water quality in the distribution system (e.g., booster disinfection, addition of corrosion control chemicals).

  • Valve means a device used to control the flow of water in the irrigation system.

  • chemical tanker means a ship constructed or adapted and used for the carriage in bulk of any liquid product listed in chapter 17 of the International Bulk Chemical Code;

  • Diesel means a distillate oil which can be used as fuel for the operation of a compression ignition engine and which has an approximate boiling temperature of between 150 °C to 400 °C;

  • Electrostatic spray means a method of applying a spray coating in which opposite electric charges are applied to the substrate and the coating. The coating is attracted to the substrate by the electrostatic potential between them.

  • Filtration means a process for removing particulate matter from water by passage through porous media.

  • Semisolid means a product that, at room temperature, will not pour, but will spread or deform easily, including but not limited to gels, pastes, and greases.