Caseload standards definition

Caseload standards means a measurable numerical minimum and maximum workload which an employee can reasonably be expected to perform in a normal workday or workweek, based on the number, variety and complexity of cases handled or number of different job functions performed.
Sample 1Sample 2Sample 3
Caseload standards means a measurable numerical minimum and maximum workload
Sample 1Sample 2Sample 3
Caseload standards means the minimum and maximum
Sample 1

Examples of Caseload standards in a sentence

  • Office Caseload standards (Developed through reference to other case management standards used by public defender and legal aid offices, including the National Legal Aid and Defender Association {NLADA}.

  • Section 50-25.1-06.1 of the North Dakota Century Code is amended and reenacted as follows: 50-25.1-06.1. Caseload standards - Reimbursement.

  • Section 50-25.1-06.1 of the North Dakota Century Code is amended and reenacted as follows:50-25.1-06.1. Caseload standards - Reimbursement.The department shall adopt caseload standards establishing minimum staff-to-client ratios for the assessment and alternative response assessment of reports of child abuse or neglect and the provision of protective services.

  • Caseload standards are only one component of an effective indigent defense sys- tem.

  • Caseload standards can be developed in various ways, ranging from a case-weighting study to adoption of NAC standards.• Develop a way to enforce or en- courage compliance with work- load standards, as Indiana has done.• Document your office’s excessive caseloads and inadequate staff and resources.

  • Information on caseload or workload requirements for such personnel, including requirements for average number and maximum number of cases per child protective service worker and supervisor.o Caseload standards are required by state Administrative Code, 75-03-19- 07, Caseload standards.

  • Caseload standards shall be a subject of discussion at Department level Labor/Management Committees (LMC) in DHR, DHMH, DJJ, DPSCS, MIA and DLLR.

  • Caseload standards developed by the Council on Accreditation (COA), which are caseloads of 15 active investigative cases per month for each worker or 15 cases per worker (no more than 18 children in foster care).

  • Caseload standards help eliminate staff overload which is common in poorly operating child welfare systems, demonstrated by research and experience as strongly linked to expensive system inefficiencies and poor outcomes.

  • Components include, but are not limited to:• State Performance measures• Care process improvement strategies• Audit of client records for completeness and accuracy• Evaluation of staff performance• Outcome analysis• Identification of internal performance standards in such areas as:o Timeliness of referral to initial contacto Caseload standards for personnelCedar’s Quality Improvement plan shall include time frames for plan objectives and systematic review by the governing board of the agency.


More Definitions of Caseload standards

Caseload standards means the minimum
Sample 1
Caseload standards means the minimum and maximum number of cases that an employee can reasonably be expected to perform in a normal work month based on the number of cases handled by or the number of different job functions performed by the employee.
Sample 1

Related to Caseload standards

  • Codes and Standards means all the applicable codes and standards as indicated in the Technical Specification.

  • Reliability Standards means the criteria, standards, rules and requirements relating to reliability established by a Standards Authority.

  • NERC Reliability Standards means the most recent version of those reliability standards applicable to the Generating Facility, or to the Generator Owner or the Generator Operator with respect to the Generating Facility, that are adopted by the NERC and approved by the applicable regulatory authorities, which are available at xxxx://xxx.xxxx.xxx/files/Reliability_Standards_Complete_Set.pdf, or any successor thereto.

  • Safety Standards means all laws, union rules and trade or industry custom or codes of any kind whatsoever, in effect from the date of this Agreement through Final Acceptance of the construction work, pertaining to worker safety and accident prevention applicable to the Project and/or the construction work (including, but not limited to, rules, regulations and standards adopted pursuant to the Occupational Safety and Health Act of 1970, as amended from time to time).

  • harmonised standard means harmonised standard as defined in point (c) of point 1 of Article 2 of Regulation (EU) No 1025/2012;

  • Specifications and Standards means the specifications and standards relating to the quality, quantity, capacity and other requirements for the Project Highway, as set forth in Schedule-D, and any modifications thereof, or additions thereto, as included in the design and engineering for the Project Highway submitted by the Contractor to, and expressly approved by, the Authority;

  • Design Standards means the standards developed as a requirement of the Programmatic Agreement

  • Service Level Standards has the meaning ascribed thereto in Section 2.1 hereof.

  • Technical Standards means the technical standards set out in paragraph 2.5 of the Order Form;

  • Standards means the British or international standards, Authority's internal policies and procedures, Government codes of practice and guidance referred to in Framework Schedule 13 (Standards) together with any other specified policies or procedures identified in Framework Schedule 13 (Standards);

  • Accessibility Standards means accessibility standards and specifications for Texas agency and institution of higher education websites and EIR set forth in 1 TAC Chapter 206 and/or Chapter 213.

  • Quality Standards means the quality standards published by BSI British Standards, the National Standards Body of the United Kingdom, the International Organisation for Standardisation or other reputable or equivalent body, (and their successor bodies) that a skilled and experienced operator in the same type of industry or business sector as the Contractor would reasonably and ordinarily be expected to comply with, and as may be further detailed in the Specification.

  • National Standards means the document entitled “National Standards for the Volatile Organic Compound Content of Canadian Commercial/Industrial Surface Coating Products Automotive Refinishing, October 1998, PN 1288" and published by the Canadian Council of Ministers of the Environment;

  • Applicable Standards means the requirements and guidelines of NERC, the Applicable Regional Entity, and the Control Area in which the Customer Facility is electrically located; the PJM Manuals; and Applicable Technical Requirements and Standards.

  • Privacy Standards means the standards of the privacy of individually identifiable health information, as pursuant to HIPAA.

  • Applicable Technical Requirements and Standards means those certain technical requirements and standards applicable to interconnections of generation and/or transmission facilities with the facilities of an Interconnected Transmission Owner or, as the case may be and to the extent applicable, of an Electric Distributor, as published by Transmission Provider in a PJM Manual provided, however, that, with respect to any generation facilities with maximum generating capacity of 2 MW or less (synchronous) or 5 MW or less (inverter-based) for which the Interconnection Customer executes a Construction Service Agreement or Interconnection Service Agreement on or after March 19, 2005, “Applicable Technical Requirements and Standards” shall refer to the “PJM Small Generator Interconnection Applicable Technical Requirements and Standards.” All Applicable Technical Requirements and Standards shall be publicly available through postings on Transmission Provider’s internet website.

  • Reliability Standard means a requirement to provide for reliable operation of the bulk power system, including without limiting the foregoing requirements for the operation of existing bulk power system facilities, including cybersecurity protection, and the design of planned additions or modifications to such facilities to the extent necessary for reliable operation of the bulk power system, but shall not include any requirement to enlarge bulk power system facilities or to construct new transmission capacity or generation capacity.

  • Clean air standards, as used in this clause, means:

  • Network Connection Standards means the Distributor’s written technical and safety standards for connection of an Electrical Installation to the Network that are issued by the Distributor and updated from time to time, and include:

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • Clean water standards, as used in this clause, means any enforceable limitation, control, condition, prohibition, standard, or other requirement promulgated under the Water Act or contained in a permit issued to a discharger by the Environmental Protection Agency or by a State under an approved program, as authorized by Section 402 of the Water Act (33 U.S.C. § 1342), or by local government to ensure compliance with pre-treatment regulations as required by Section 307 of the Water Act (33 U.S.C. § 1317).

  • Air Standards Manager means the Manager, Human Toxicology and Air Standards Section, Standards Development Branch, or any other person who represents and carries out the duties of the Manager, Human Toxicology and Air Standards Section, Standards Development Branch, as those duties relate to the conditions of this Certificate.

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • Uniform Network Code means the uniform network code as defined in Standard Special Condition A11(6) of National Grid’s transporters licence, as such code may be amended from time to time in accordance with the terms thereof.

  • Airworthiness Directive or “AD” means any airworthiness directive issued by the Certificating Authority, in addition to any airworthiness directive issued by the Aeronautics Authority, each to the extent the same is applicable to the Aircraft and/or any Item of Equipment.

  • Good Industry Practices means the practices that would be adopted by, and the exercise of that degree of care, skill, diligence, prudence and foresight that reasonably would be expected from, a competent contractor in the international oil and gas industry experienced in performing work similar in nature, size, scope and complexity to the Work and under conditions comparable to those applicable to the Work, where such work is subject to, and such contractor is seeking to comply with, the standards and codes specified in the Contract or (to the extent that they are not so specified) such national or international standards and codes as are most applicable in the circumstances, and the applicable Law.