Polyethylene. 1 Field - The discovery, development and use of catalysts for the Coordination Polymerization of ethylene and/or a-olefins to make homopolymers or copolymers (density <0.915 according to ASTM D792);
Polyethylene Sample Clauses
Related to Polyethylene
Product The term “
Cockpit (a) Fairing panels shall be free of stains and cracks, will be clean secure and repainted as necessary;
Temperature The Committed Gas shall not have a temperature of less than forty degrees Fahrenheit (40°F) nor more than one hundred twenty degrees Fahrenheit (120°F).
FLOORING Grade and quality of carpeting to be selected by Landlord, with color to be selected by Tenant from those offered by Landlord.
Asbestos Mortgagor shall not install nor permit to be installed in the Mortgaged Property asbestos or any asbestos-containing material (collectively, "ACM") except in compliance with any and all applicable present and future Environmental Laws respecting ACM. With respect to any ACM (including friable or non-friable asbestos or asbestos-containing materials regulated under any Environmental Law) discovered to be present in the Mortgaged Property at any time during the operation of this Mortgage, Mortgagor shall comply in all material respects with any and all applicable present and future Environmental Laws, all at Mortgagor's sole cost and expense Upon the occurrence and during the continuation of an Event of Default, Mortgagee may, but shall not be obligated to, in addition to any other remedies set forth herein, take, in substantial compliance with any applicable present and future Environmental Laws, whatever steps it deems reasonably necessary or appropriate to comply with any and all applicable present and future Environmental Laws. Any costs or expenses reasonably incurred by Mortgagee for such purpose shall be due within ten (10) days after demand and payable by Mortgagor and shall bear interest at the Default Rate. Mortgagor shall provide to Mortgagee and its agents and employees reasonable access to the Mortgaged Property and hereby specifically grants to Mortgagee a license to remove or encapsulate such ACM in substantial compliance with any applicable present and future Environmental Law if Mortgagor fails to do so and removal or encapsulation is required under any applicable present and future Environmental Law; provided, however, that nothing contained herein shall obligate Mortgagee to exercise any rights under such license. Mortgagor shall indemnify and hold Mortgagee harmless from and against all loss, cost, damage and expense (including, without limitation, reasonable attorneys' and consultants' fees) that Mortgagee may sustain as a result of the presence of any ACM and any removal or encapsulation thereof or compliance with any and all applicable present and future Environmental Laws other than such loss, cost, damage or expense, if any, to the extent it is caused solely by the gross negligence or willful misconduct of Mortgagee or its agents, contractors and subcontractors in performing any act or exercising its remedies under this Mortgage.
Fuel Upon redelivery of the Aircraft to Lessor, an adjustment will be made in respect of fuel on board on the Previous Delivery Date and the Expiry Date at the price then prevailing at the Redelivery Location.
GLASS The Tenant shall maintain the glass part of the demised premises, promptly replacing any breakage and fully saving the Landlord harmless from any loss, cost or damage resulting from such breakage or the replacement thereof.
Samples Distributor shall provide to Subdistributor samples and prototypes that are not intended for resale to the extent such are made available by its Suppliers and at the same cost (if any) assessed by its Suppliers. Subdistributor shall promptly return all samples and prototypes to Distributor on the expiration or earlier termination of this Agreement as provided for in 0. Distributor retains all rights, title, and interest in and to all samples and prototypes before, during, and after the Term; and Loaned Instruments. Within a reasonable amount of time following the execution of this Agreement, Distributor will loan up to 2 sets of Instruments to the Subdistributor. Thereafter, Distributor may, at its discretion, loan additional sets of Instruments to Subdistributor from time to time pursuant to this provision. Any Instruments loaned to Subdistributor pursuant to this provision are referred to as “Loaned Instruments”. Subdistributor shall be permitted, in turn, to loan the Loaned Instruments to Customers that have purchased Products for use in connection with the Products; however, such Loaned Instruments will remain the property of Distributor and may be retrieved and retaken by Distributor at any time. Orders for Products and Instruments Purchase Orders. Subdistributor shall submit to Distributor written purchase orders for the Products and Instruments it elects to purchase and distribute pursuant to this Agreement, which orders shall include: (i) a list of the Products and Instruments ordered, (ii) the quantities of such Products and Instruments, and (iii) precise instructions for packaging, invoicing and shipping.
Sampling Producer shall take one representative origin sample (pint size) from each lot of the corn oil before it leaves the Ethanol Facility (each, a “Sample”). RPMG shall be entitled to witness the taking of Sample. Producer shall label Sample to indicate the applicable corn oil lot numbers, date of shipment, and the truck or railcar number. Producer shall send half of Sample to RPMG promptly upon RPMG’s request. Producer may request that RPMG test results be provided to it at any time after the tests are completed. Producer shall retain corn oil Sample for no less than three (3) months or any longer period required by law. If RPMG knows or reasonably suspects that any corn oil produced by Producer at the Ethanol Facility is not in compliance with the terms of this Agreement, then RPMG may obtain independent laboratory tests of such corn oil, and, if such corn oil is found not to be in compliance with the terms of this Agreement, Producer shall, in addition to its other obligations hereunder, pay all such testing costs.
Products 1.1. The information (including but not limited to the quantity, rated hashrate, unit price (“Unit Price”), total price for one item (“Total Price (One Item)”), total price for all the items (“Total Purchase Price”) of Products to be purchased by Party B from Party A is as follows (“Products”):
