Sampling and Analysis The sampling and analysis of the coal delivered hereunder shall be performed by Buyer upon delivery of the coal to Buyer’s facility, and the results thereof shall be accepted and used as defining the quality and characteristics of the coal delivered under this Agreement and as the Payment Analysis. All analyses shall be made in Buyer’s laboratory at Buyer’s expense in accordance with ASTM standards where applicable, or industry-accepted standards in other cases. Samples for analyses shall be taken in accordance with ASTM standards or other methods mutually acceptable to both parties. Seller shall transmit its “as loaded” quality analysis to Buyer as soon as possible. Seller’s “as-loaded” quality shall be the Payment Analysis only when Buyer’s sampler and/or scales are inoperable, or if Buyer fails to obtain a sample upon unloading. Seller represents that it is familiar with Buyer’s sampling and analysis practices, and that it finds them to be acceptable. Buyer shall notify Seller in writing of any significant changes in Buyer’s sampling and analysis practices. Any such changes in Buyer’s sampling and analysis practices shall, except for ASTM or industry-accepted changes in practices, provide for no less accuracy than the sampling and analysis practices existing at the time of the execution of this Agreement, unless the Parties otherwise mutually agree. Each sample taken by Buyer shall be divided into four (4) parts and put into airtight containers, properly labeled and sealed. One (1) part shall be used for analysis by Buyer. One (1) part shall be used by Buyer as a check sample, if Buyer in its sole judgment determines it is XXXXXXXXX COAL COMPANY, INC. LG&E/KU Xxxxxxxx Xx. X00000 necessary. One (1) part shall be retained by Buyer until thirty (30) days after the sample is taken (“Disposal Date”), and shall be delivered to Seller for analysis if Seller so requests before the Disposal Date. One (1) part (the “Referee Sample”) shall be retained by Buyer until the Disposal Date. Seller shall be given copies of all analyses made by Buyer by the fifth (5th) business day of the month following the month of unloading. In addition, Buyer shall send Seller weekly analyses of coal unloaded at Buyer’s facilities. Seller, on reasonable notice to Buyer, shall have the right to have a representative present to observe the sampling and analyses performed by Buyer, Unless Seller requests an analysis of the Referee Sample before the Disposal Date, Buyer’s analysis shall be used to determine the quality of the coal delivered hereunder and shall be the Payment Analysis. The Monthly Weighted Averages of specifications referenced in §6.1 shall be based on the individual Shipment analyses. If any dispute arises with regard to the analysis of any sample before the Disposal Date for such sample, the Referee Sample retained by Buyer shall be submitted for analysis to an independent commercial testing laboratory (“Independent Lab”) mutually chosen by Buyer and Seller. For each coal quality specification in question, if the analysis of the Independent Lab differs by more than the applicable ASTM reproducibility standards, the Independent Lab results will govern, and the prior analysis shall be disregarded. All testing of the Referee Sample by the Independent Lab shall be at requestor’s expense unless the Independent Lab results differ from the original Payment Analysis for any specification by more than the applicable ASTM reproducibility standards as to that specification. In such case, the cost of the analysis made by the Independent Lab shall be borne by the party who provided the original Payment Analysis. XXXXXXXXX COAL COMPANY, INC. LG&E/KU Contract No. J14004
Financial Condition There shall have been no material adverse change, as determined by Bank, in the financial condition or business of Borrower, nor any material decline, as determined by Bank, in the market value of any collateral required hereunder or a substantial or material portion of the assets of Borrower.
Risk Analysis The Custodian will provide the Fund with a Risk Analysis with respect to Securities Depositories operating in the countries listed in Appendix B. If the Custodian is unable to provide a Risk Analysis with respect to a particular Securities Depository, it will notify the Fund. If a new Securities Depository commences operation in one of the Appendix B countries, the Custodian will provide the Fund with a Risk Analysis in a reasonably practicable time after such Securities Depository becomes operational. If a new country is added to Appendix B, the Custodian will provide the Fund with a Risk Analysis with respect to each Securities Depository in that country within a reasonably practicable time after the addition of the country to Appendix B.
Financial Conditions Section 4.01. (a) The Recipient shall maintain or cause to be maintained a financial management system, including records and accounts, and prepare financial statements in a format acceptable to the Bank, adequate to reflect the operations, resources and expenditures in respect of the Project and each Sub-project (including its cost and the benefits to be derived from it).
Independent Analysis Each Party hereby confirms that its decision to execute this Agreement has been based upon its independent assessment of documents and information available to it, as it has deemed appropriate.
MEASUREMENT AND VERIFICATION The goal of this task is to report the benefits resulting from this project. Project team may use in- house expertise of the project demonstration site or use third party vendor for measurement and verification (M&V) of GHG and energy consumption reduction. The Recipient shall: • Enter into agreement with M&V subcontractor per Task 1.9 • Coordinate site visits with the M&V subcontractor at the demonstration sites • Develop M&V protocol for pre-installation measurement (and calculation): o Electric, natural gas and/or other fossil fuel consumption and GHG emissions (use appropriate emissions factor from Attachment 8 of the grant solicitation) of the equipment/process/system(s)/sub-system(s) that are to be upgraded and/or replaced and/or modified. o Ensure installation of sub-metering equipment and data loggers for pre/post data analysis. • Prepare and provide a detailed M&V Plan for each project demonstration site to include but not be limited to: o Description of the monitoring equipment and instrumentation which will be used. o Description of the key input parameters and output metrics which will be measured. o Description of the M&V protocol and analysis methods to be employed. o Description of the independent, third-party M&V services to be employed, if applicable. • Perform three months (or shorter period as approved in writing by the CAM) of pre- installation measurements (and calculations) based on the M&V protocol for pre- installation. • Prepare and provide a Pre-Installation M&V Findings Report for each demonstration site that includes M&V protocol, pre-install measurements (and calculations), analysis, and results performed in this task. • Develop M&V protocol for post-installation measurements (and calculations) of: o Electric, natural gas and/or other fossil fuel consumption and GHG emissions (use appropriate emissions factor from Attachment 8 of the grant solicitation) of the equipment/process/system(s)/sub-system(s) that will be upgraded and/or replaced and/or modified Perform 12 months or two seasons, for seasonal facilities, (or shorter period as approved in writing by the CAM) of post-installation measurements based on M&V protocol for post-installation. • Provide a summary of post-installation M&V progress in Progress Report(s) (see subtask 1.5) which shall include but not be limited to: o A narrative on operational highlights from the reporting period, including any stoppages in operation and why; and o A summary of M&V findings from the reporting period. • Analyze post-installation electrical, natural gas and/or other fossil fuel consumption and GHG emissions. • Prepare and provide a Post-Installation M&V Findings Report for each demonstration site that includes M&V protocol, pre and post install measurements (and calculations), analysis, and results performed in this task. Results should at a minimum report on the reduction of electricity, natural gas and/or other fossil fuel usage and reductions of GHG emissions that directly result from this project and include the following: o Provide all key assumptions used to estimate and determine energy and GHG reductions (and additions, if applicable). o Provide all key assumptions used to estimate projected benefits, including targeted market sector (e.g., population and geographic location), projected market penetration, baseline and projected energy use and cost, operating conditions, and emission reduction calculations. o Discuss whether the energy and GHG emission reductions identified in section II.C were met. • Prepare a CPR Report #2 in accordance with subtask 1.3. • Participate in a CPR Meeting #2.
Performance Evaluations 34.1. The Contractor is subject to an annual performance evaluation to be conducted by NYCDOT pursuant to the PPB Rules.
FINANCIAL EVALUATION (a) The financial bid shall be opened of only those bidders who have been found to be technically eligible. The financial bids shall be opened in presence of representatives of technically eligible bidders, who may like to be present. The institute shall inform the date, place and time for opening of financial bid.
Investment Analysis and Commentary The Subadviser will provide quarterly performance analysis and market commentary (the “Investment Report”) during the term of this Agreement. The Investment Reports are due within 10 days after the end of each quarter. In addition, interim Investment Reports shall be issued at such times as may be mutually agreed upon by the Adviser and Subadviser; provided however, that any such interim Investment Report will be due within 10 days of the end of the month in which such agreement is reached between the Adviser and Subadviser. The subject of each Investment Report shall be mutually agreed upon. The Adviser is freely able to publicly distribute the Investment Report.
Measurement and Billing The Parties shall measure Interconnection in accordance with this Section 4.6 and xxxx in accordance with Article XXVII and this Section 4.6.
