Test procedure The engine speed shall be gradually increased from idle to the target engine speed, not exceeding the tolerance band of ±3 per cent of the target engine speed, and held constant. Then the throttle control shall be rapidly released and the engine speed shall be returned to idle. The sound pressure level shall be measured during a period of operation consisting of a maintaining constant engine speed of 1 second and throughout the entire deceleration period. The maximum sound level meter reading during this period of operation, mathematically rounded to the first decimal place, is taken as the test value.
Move-Out Procedure Prior to either (i) the expiry of the Term, or (ii) the date on which the Resident is to vacate the Residence (detailed in Table 1 & 3), the Manager, or designate, can be requested in advance by the Resident to complete a visual inspection of the Suite to view the state of cleanliness and repair. If no request to inspect the suite is made by the Resident, the inspection will take place once the Resident has vacated the suite. In the event the Resident chooses to have the inspection completed prior to vacating the suite, the Manager, or designate, will inspect the suite and inform the Resident of potential damage and/or cleaning charges and outline what steps the student may take to mitigate charges. On vacating, all garbage and belongings of the Resident must be removed, and the suite must be cleaned to the point of restoring the suite to its original condition. Once the Resident has vacated, the Manager, or designate, will complete a documented visual inspection of the Suite. In the event deficiencies are found, the cost of cleaning the suite and restoring it to its original state may be deducted from the Resident’s original Deposit. There is a minimum cleaning charge of $25.00 and damage charges will be billed accordingly at the cost of restoring the suite to its original condition. Any items left behind by the Resident will be immediately discarded; the Residence shall not be liable to the Resident for any loss of property as a result. As with the “move-in procedures”, care must be exercised to avoid damage to doors, frames, walls, floor coverings and any other part of the Residence. The Resident is financially responsible to pay forthwith for any damage caused on moving out of the Residence.
Extra Work At any time during the Term of this Agreement, City may request that Consultant perform Extra Work. As used herein, “Extra Work” means any work which is determined by City to be necessary for the proper completion of the Project, but which the Parties did not reasonably anticipate would be necessary at the execution of this Agreement. Consultant shall not perform, nor be compensated for, Extra Work without written authorization from City’s Representative.
Complaints Procedure 18.1 If the Client has any cause for complaint in relation to the services provided by the Company, he should file a complaint as per the Company’s Complaint Handling policy which is available on the Company’s website.
Submission Procedure a. If an appeal from suspension or reduction is not settled at Step 2, it may be presented to the Chief of Employee Relations within seven (7) calendar days from the date the decision was rendered.
Construction Safety Prior to contract award, the successful bidder must provide a Certificate of Recognition or Letter of Good Standing issued by an occupational health and safety organization approved by the Workers’ Compensation Board of Nova Scotia.
Tenant’s Work After the Commencement Date, Tenant at its sole cost and expense intends to construct leasehold improvements in the Demised Premises (“Tenant’s Work”) as detailed in the plans and specifications to be prepared by Tenant’s architect (“TI Architect”). Tenant shall be allowed to select a general contractor to perform the Tenant’s Work, provided said general contractor shall be properly licensed, bonded and of a reputation reasonably acceptable to Landlord. An affiliate of Landlord, Minkoff Development Corporation (“MDC”), shall act as Landlord’s construction manager to review plans and oversee construction of the Tenant’s Work by the general contractor. MDC shall receive a fee equal to one percent (1%) of the cost of the Tenant’s Work, which fee shall not exceed $50,000. Tenant shall have the right to submit plans for the Tenant’s Work in stages for portions of the Demised Premises. Tenant shall cause the TI Architect to prepare and deliver to Landlord for Landlord’s or MDC’s review preliminary plans (architectural, mechanical, electrical, plumbing and structural, if necessary) and specifications for the proposed leasehold improvements (the “Preliminary Plans”). Landlord shall have five (5) business days after its receipt thereof (or such additional time as may reasonably be necessary) to review the Preliminary Plans, request any changes it deems reasonably appropriate, and indicate on the Preliminary Plans which portions of the leasehold improvements are to be removed by Tenant prior to the expiration or termination of the Lease. The TI Architect shall modify the Preliminary Plans to accommodate Landlord’s changes, and resubmit the revised plans (the “Revised Preliminary Plans”) to Landlord for approval. If Tenant or the TI Architect elect not to make said changes to the Preliminary Plans, then Landlord shall have the right to require Tenant to perform corresponding restoration work to effect said changes prior to the expiration or termination of the Lease. Upon receipt of Landlord’s approval of the Revised Preliminary Plans, the TI Architect shall prepare a complete set of construction drawings and specifications for the construction of the proposed leasehold improvements (the “Working Drawings”). The Working Drawings shall be in sufficient detail for (i) Tenant’s general contractor to obtain bids from all trades for and to perform the work described on the Working Drawings; (ii) Tenant’s general contractor to secure building permits from the requisite governmental authorities having jurisdiction over same; and (iii) Landlord or MDC to indicate the portion of Tenant’s Work, if any, which Tenant is to remove by expiration or termination of the Lease. The Working Drawings shall conform to and be consistent with the Revised Preliminary Plans and comply with all applicable Laws and Insurance Requirements, as those terms are defined in the Lease. The Working Drawings shall be submitted to MDC for review and approval, which approval (or a request for changes to be made) shall be given within ten (10) days after receipt thereof. Within five (5) business days after MDC’s approval of the Working Drawings, as modified by any revisions requested by MDC, Landlord and Tenant shall initial same to confirm their mutual approval thereof (the “Approved Working Drawings ”). The Approved Working Drawings will indicate which portions of the Tenant’s Work, if any, will have to be removed by Tenant prior to the expiration or termination of the Lease, and Tenant will timely comply with such requirement and repair any damage to the Land or the Building caused thereby at its own expense. Tenant will have no obligation to remove any other portion of the Tenant’s Work.
Complaint Procedure If an employee has a complaint, which is not a proper subject for a grievance under the grievance procedure, the employee may discuss it with their immediate supervisor. The employee may submit the complaint in writing. If necessary, the employee may also discuss the complaint with the Director of Staff Relations. The employee may have the assistance of their Alliance representative in presenting the complaint. Complaints shall be answered as soon as reasonably possible, but in no event shall an answer be delayed more than seven (7) business days, unless the time for an answer is extended by mutual agreement. If the employee and the Alliance are dissatisfied with the answer they may request a Special Conference.
Settlement procedure 4.1. The Client has the right to withdraw his/her own funds which are not encumbered with deposit obligations or Commission payments in case of Copy Trading.
Test procedures For an Asset Review, the Asset Representations Reviewer will perform for each Asset Review Receivable the procedures listed under “Procedures to be Performed” in Schedule A for each representation and warranty (each, a “Test”), using the Asset Review Materials listed for each such Test in Schedule A. For each Test and Asset Review Receivable, the Asset Representations Reviewer will determine if the Test has been satisfied (a “Test Pass”) or if the Test has not been satisfied (a “Test Fail”).
