Flammability. The graphic film should fall under min. class B when tested as per UIC-564-2OR Appendix 12. Temperature Resistance: The film shall be resistant to temperatures between -10∞C and +100∞C without any visible changes such as detachment cracks, bubble formation and color changes. Dimensional stability: The shrinkage of the graphic films after application shall not exceed 0.2%. This is to be tested. Resistance to Detergents: The graphic films shall be resistant to detergents used by the agency for periodic cleaning of the board. The surface of the sealed film shall not soften and the color and the adhesive power shall not change. The same applies to surface softening and to all kind of detachments (waves, bubbles etc.).
Flammability. R 4.7-1 All materials shall comply with the requirements necessary to obtain a UL/CE mark.
Flammability. All molded materials shall meet the flammability requirements according to IEC 695 T 2.2 or, alternatively, according to XX 00 X-0 (Xxxxxxxxx) or UL 94 V-1. Moreover the oxygen index shall be greater than or equal to 28% according to ASTM method D2863-77.
Flammability. 3. Health hazards (is it carcinogenic, strong acid/base, endocrine disruptor, biohazard, etc.?)
Flammability. Meets CPSC-FF-1-70, DOC-FF-1-70 Methenamine Tablet Test criteria.
Flammability. Suppliers will submit "evidence" of annual compliance to FMVSS302 flammability requirements.
Flammability. Licensee will ensure that all Licensed Products are manufactured in compliance with all applicable laws, including, without limitation, the Flammable Fabrics Act, as amended, and regulations thereunder and Licensee guarantees, that with regard to all products, fabrics or related materials used in the manufacture of Licensed Products, for which flammability standards have been issued, amended or continued in effect under the Flammable Fabrics Act, as amended, reasonable and representative tests, as prescribed by the Consumer Product Safety Commission, have been performed that show that Licensed Products at the time of their shipment or delivery conform to the above-referenced flammability standards as are applicable.
Flammability. Fabrics and other materials in the CK shall be non-flammable, self extinguishing, and shall not melt when exposed to flame or high heat. 13 W911QY-04-R-0011 Attachment 1 MIL-PRF-32026(GL)
Flammability. Meets CPSC-FF-1-70, DOC-FF-1-70 Methenamine Tablet Test criteria. c. Flooring Radiant Panel Test: Meets NFPA 253 Class I or II depending upon occupancy and fire code when tested under ASTM E-648 for glue down installation. d. Smoke Density: NBS Smoke Chamber - Less than 450 Flaming Mode when tested under ASTM E-662. NOTE: Testing must be performed in a NVLAP accredited laboratory.
Flammability. Licensee will ensure that all Licensed Products are manufactured in compliance with all applicable laws, including, without limitation, the Flammable Fabrics Act, as amended, and regulations thereunder, and Licensee guarantees, that with regard to all products, fabrics or related materials used in the manufacture of Licensed Products, for which flammability standards have been issued, amended or continued in effect under the Flammable Fabrics Act, as amended, reasonable and representative tests or data, as prescribed by the Consumer Product Safety Commission, have been performed or made available to Licensee that show that Licensed Products at the time of their shipment or delivery conform to the above-referenced flammability standards as are applicable.
