Duty to Number and Xxxx Equipment Sample Clauses

Duty to Number and Xxxx Equipment. With respect to the Units to be delivered on the Closing Date, Lessee represents that Manager has caused, and on or prior to the date on which a Lease Supplement is executed and delivered in respect of a Replacement Unit pursuant to Section 11.4(b) (or, if the applicable Replacement Unit is not in the possession of Lessee or the Manager, as soon as practicable and in any event no later than ten Business Days after the earliest date on which Lessee or the Manager obtains possession of such Replacement Unit (whether for purposes of repair or maintenance or otherwise)), Lessee will cause, each Unit to be numbered with the reporting xxxx shown on the Lease Supplement dated the date on which such Unit was delivered and covering such Unit, and will from and after such date keep and maintain, plainly, distinctly, permanently and conspicuously marked by a plate or stencil printed in contrasting colors upon each side of each Unit, in letters not less than one inch in height, a legend substantially as follows: "OWNERSHIP SUBJECT TO A SECURITY AGREEMENT FILED WITH THE SURFACE TRANSPORTATION BOARD" with appropriate changes thereof and additions thereto as from time to time may be required by law in order to protect Lessor's right, title and interest in and to such Unit, its rights under this Lease and the rights of the Indenture Trustee. Except as provided hereinabove, Lessee will not place any such Units in operation or exercise any control or dominion over the same until the required legend shall have been so marked on both sides thereof, and will replace promptly any such word or words in such legend which may be removed, defaced, obliterated or destroyed. In the event of a change in the reporting xxxx of any Unit, as soon as practicable (and in any event within 60 days after a Responsible Officer of the Manager has received notice of any such changed xxxx) a statement of the new reporting xxxx to be substituted therefor shall be delivered by Lessee to Lessor and, so long as the Indenture shall not have been discharged pursuant to its terms, to the Indenture Trustee. As soon as practicable, but in any event within 30 days, after the delivery of such statement a supplement to this Lease and, if not so discharged, the Indenture, with respect to such new reporting marks, shall be filed or recorded in all public offices where this Lease and the Indenture shall have been filed or recorded and in such other places, if any, where Lessor and, so long as the Indenture shall...
AutoNDA by SimpleDocs
Duty to Number and Xxxx Equipment. With respect to the Units to be delivered on the Closing Date, Lessee represents that Manager has caused, and on or prior to the date on which a Lease Supplement is executed and delivered in respect of a Replacement Unit pursuant to Section 11.4(b) (or, if the applicable Replacement Unit is not in the possession of Lessee or the Manager, as soon as practicable and in any event no later than ten Business Days after the earliest date on which Lessee or the Manager obtains possession of such Replacement Unit (whether for purposes of repair or maintenance or otherwise)), Lessee will cause, each Unit to be numbered with the reporting xxxx shown on the Lease Supplement dated the date on which such Unit was delivered and covering such Unit, and will from and after such date keep and maintain, plainly, distinctly, permanently and conspicuously marked by a plate or stencil printed in contrasting colors upon each side of each Unit, in letters not less than one inch in height, a legend substantially as follows:
Duty to Number and Xxxx Equipment. With respect to the Units to be delivered on the Closing Date, Lessee represents that Manager has caused, and as soon as practicable after the date on which a Lease Supplement is executed and delivered in respect of a Replacement Unit pursuant to Section 11.4(b), Lessee will cause, each Unit to be numbered with its reporting xxxx shown on the Lease Supplement dated the date on which such Unit was delivered and covering such Unit, and will from and after such date keep and maintain, plainly, distinctly, permanently and conspicuously marked by a plate or stencil printed in contrasting colors upon each side of each Unit, in letters not less than one inch in height, a legend substantially as follows:
Duty to Number and Xxxx Equipment. With respect to the --------------------------------- Units to be delivered on the Closing Date, Lessee has caused, and as soon as practicable after the date on which a Lease Supplement is executed and delivered in respect of a Replacement Unit pursuant to Section 11.4(b), Lessee will cause, each Unit to be numbered with its reporting xxxx shown on the Lease Supplement dated the date on which such Unit was delivered and covering such Unit, and will from and after such date keep and maintain, plainly, distinctly, permanently and conspicuously marked by a plate or stencil printed in contrasting colors upon each side of each Unit, in letters not less than one inch in height, a legend substantially as follows:
Duty to Number and Xxxx Equipment. The Owner will, on or prior to the Closing Date, cause, and as soon as practicable after the date on which an Indenture Supplement is executed and delivered in respect of a Replacement Unit pursuant to Section 4.06(b), the Owner will cause, each Unit to be numbered with a reporting xxxx shown on the Indenture Supplement dated the date on which such Unit was delivered and covering such Unit, and will [Trust Indenture and Security Agreement (GATX Trust No. 2008-2)] from and after such date keep and maintain, plainly, distinctly, permanently and conspicuously marked by a plate or stencil printed in contrasting colors upon each side of each Unit, in letters not less than one inch in height, a legend substantially as follows:
Duty to Number and Xxxx Equipment. With respect to the --------------------------------- Units to be delivered on the Closing Date, Lessee represents that GATC has caused, and as soon as practicable after the date on which a Lease Supplement is executed and delivered in respect of a Replacement Unit pursuant to Section 11.4(b), Lessee will cause, each Unit to be numbered with its reporting xxxx shown on the Lease Supplement dated the date on which such Unit was delivered and covering such Unit, and will from and after such date keep and maintain, plainly, distinctly, permanently and conspicuously marked by a plate or stencil printed in contrasting colors upon each side of each Unit, in letters not less than one inch in height, a legend substantially as follows:

Related to Duty to Number and Xxxx Equipment

  • Meter and Cabling Be obliged to draw electricity lines/wires, television cables, broadband data cables and telephone cables to the said Apartment only through the ducts and pipes provided therefor, ensuring that no inconvenience is caused to the Promoter or to other apartment owners. The main electricity meter shall be installed only at the space designated for common meters. The Allottee shall under no circumstances be entitled to affix, draw or string wires, cables, dish antennae or pipes from, to or through any part or portion of and outside walls of the building in which the Apartment is located save in the manner indicated by the Promoter/Association (upon formation).

  • Minimum Site Requirements for TIPS Sales (when applicable to TIPS Sale). Cleanup: When performing work on site at a TIPS Member’s property, Vendor shall clean up and remove all debris and rubbish resulting from their work as required or directed by the TIPS Member or as agreed by the parties. Upon completion of work, the premises shall be left in good repair and an orderly, neat, clean and unobstructed condition. Preparation: Vendor shall not begin a project for which a TIPS Member has not prepared the site, unless Vendor does the preparation work at no cost, or until TIPS Member includes the cost of site preparation in the TIPS Sale Site preparation includes, but is not limited to: moving furniture, installing wiring for networks or power, and similar pre‐installation requirements. Registered Sex Offender Restrictions: For work to be performed at schools, Vendor agrees that no employee of Vendor or a subcontractor who has been adjudicated to be a registered sex offender will perform work at any time when students are, or reasonably expected to be, present unless otherwise agreed by the TIPS Member. Vendor agrees that a violation of this condition shall be considered a material breach and may result in the cancellation of the TIPS Sale at the TIPS Member’s discretion. Vendor must identify any additional costs associated with compliance of this term. If no costs are specified, compliance with this term will be provided at no additional charge. Safety Measures: Vendor shall take all reasonable precautions for the safety of employees on the worksite, and shall erect and properly maintain all necessary safeguards for protection of workers and the public. Vendor shall post warning signs against all hazards created by the operation and work in progress. Proper precautions shall be taken pursuant to state law and standard practices to protect workers, general public and existing structures from injury or damage. Smoking: Persons working under Agreement shall adhere to the TIPS Member’s or local smoking statutes, codes, ordinances, and policies.

  • Insurance and Fingerprint Requirements Information Insurance If applicable and your staff will be on TIPS member premises for delivery, training or installation etc. and/or with an automobile, you must carry automobile insurance as required by law. You may be asked to provide proof of insurance. Fingerprint It is possible that a vendor may be subject to Chapter 22 of the Texas Education Code. The Texas Education Code, Chapter 22, Section 22.0834. Statutory language may be found at: xxxx://xxx.xxxxxxxx.xxxxx.xxxxx.xx.xx/ If the vendor has staff that meet both of these criterion: (1) will have continuing duties related to the contracted services; and (2) has or will have direct contact with students Then you have ”covered” employees for purposes of completing the attached form. TIPS recommends all vendors consult their legal counsel for guidance in compliance with this law. If you have questions on how to comply, see below. If you have questions on compliance with this code section, contact the Texas Department of Public Safety Non-Criminal Justice Unit, Access and Dissemination Bureau, FAST-FACT at XXXX@xxxxx.xxxxx.xx.xx and you should send an email identifying you as a contractor to a Texas Independent School District or ESC Region 8 and TIPS. Texas DPS phone number is (000) 000-0000. See form in the next attribute to complete entitled: Texas Education Code Chapter 22 Contractor Certification for Contractor Employees

  • Access to Work Locations Reasonable access to employee work locations shall be granted officers of the Association and their officially designated representatives for the purpose of processing grievances or contacting members of the Association concerning business within the scope of representation. Such officers or representatives shall not enter any work location without the consent of the City Manager. Access shall be restricted so as not to interfere with the normal operations of the department or with established safety or security requirements. Solicitation of membership and activities concerned with the internal management of the Association, such as collecting dues, holding membership meetings, campaigning for office, conducting elections and distributing literature, shall not be conducted during working hours.

  • PREVAILING WAGE RATES - PUBLIC WORKS AND BUILDING SERVICES CONTRACTS If any portion of work being Bid is subject to the prevailing wage rate provisions of the Labor Law, the following shall apply:

  • Right to Refuse to Cross Picket Lines All employees covered by this Agreement shall have the right to refuse to cross a picket line arising out of a dispute as defined in the Labour Relations Code of British Columbia. Any employee failing to report for duty shall be considered to be absent without pay. Failure to cross a picket line encountered in carrying out the Employer's business shall not be considered a violation of this Agreement nor shall it be grounds for disciplinary action.

  • Changes in Equipment, Systems, Etc USBFS reserves the right to make changes from time to time, as it deems advisable, relating to its systems, programs, rules, operating schedules and equipment, so long as such changes do not adversely affect the services provided to the Trust under this Agreement.

  • LIABILITY FOR UNAUTHORIZED USE-LOST/STOLEN CARD NOTIFICATION You agree to notify Credit Union immediately, orally or in writing at Florida Credit Union, X.X. Xxx 0000, Xxxxxxxxxxx, XX 00000 or telephone (000) 000-0000 twenty four

  • Additional Requirements from Authorized Users An Authorized User may have distinct requirements that must be met by all individuals employed by or working for the Authorized User. The Contractor’s Staff Members will be expected to comply with these requirements as a condition of the placement.

  • Allocation and use of scarce resources Any procedures for the allocation and use of scarce resources, including frequencies, numbers and rights of way, will be carried out in an objective, timely, transparent and non-discriminatory manner. The current state of allocated frequency bands will be made publicly available, but detailed identification of frequencies allocated for specific government uses is not required.

Time is Money Join Law Insider Premium to draft better contracts faster.