Telnet definition

Telnet means a network protocol used on the Internet or local area networks to provide a bidirectional interactive text-oriented communication facility using a virtual terminal connection;

Split View

AI-Powered Contracts

Draft, Review & Redline at the Speed of AI

Get StartedBook a Demo

Telnet means a telecommunication network protocol used on Internet or local area networks to provide a bidirectional interactive text-oriented communications facility using a virtual terminal connection.

Telnet telnet if password == "None": password= raw_input("Enter password.\n") password= password.rstrip('\n') telnet = telnetlib.Telnet(host) ▇▇▇▇▇▇.▇▇▇▇_until('username:',timeout=10) telnet.write(username+"\r") ▇▇▇▇▇▇.▇▇▇▇_until('password:',timeout=10) telnet.write(password+"\r") ▇▇▇▇▇▇.▇▇▇▇_until('system>',timeout=10) telnet.write("power -T blade[" + blade + "] -off\r") #turns blade off data = ▇▇▇▇▇▇.▇▇▇▇_until('system>',timeout=10) telnet.write('exit\r') telnet.close() outputcheck=0; #checks if any if statements used if str(▇▇.▇▇▇▇▇▇(r'\bempty\b',data)) == 'None': #if statements for telnet output nothing=0 else: print "\nTarget bay for blade "+str(blade)+" is empty" outputcheck=1; if str(▇▇.▇▇▇▇▇▇(r'\bOK\b',data)) == 'None': nothing=0 else: print "\nBlade "+str(blade)+" has been turned off successfully" outputcheck=1; if str(▇▇.▇▇▇▇▇▇(r'\bfailed\b',data)) == 'None': nothing=0 else: print "\nPowering off blade "+str(blade)+" failed" outputcheck=1; if str(▇▇.▇▇▇▇▇▇(r'\brange\b',data)) == 'None': nothing=0 else: print "\nThe target bay is out of range." outputcheck=1; if str(▇▇.▇▇▇▇▇▇(r'\bauthority\b',data)) == 'None': nothing=0 else: print "\nUser does not have the authority to issue this command." outputcheck=1; if outputcheck == 0: print data; if type == "ssh": #ssh name= username + "@" + host #sets up ssh command data=[] #creates array data.append(os.popen("ssh " + name + " power -T blade[" + blade + "] -off").read()) #executes turn off blade command exitcodecheck=[] exitcodecheck.append(os.popen("echo $?").read()); value=exitcodecheck[0]; if int(value) != 0: #Checks Exit Code of ssh command if int(value) == 75: print "Operation was not performed because the device or MM was"; print "not in the correct state."; if int(value) == 70: print "Internal Software Error"; if int(value) == 64: print "Command Line Usage Error"; if int(value) == 127: print "Command Not Found"; if int(value) == 126: print "User does not have permission"; if int(value) == 128: print "This value is strictly internal to AMM"; outputcheck=0; #checks if any if statements used nothing=0 else: print "\nTarget bay for blade "+str(blade)+" is empty" outputcheck=1; if str(▇▇.▇▇▇▇▇▇(r'\bOK\b',data[0])) == 'None': nothing=0 else: print "\nBlade "+str(blade)+" has been turned off successfully" outputcheck=1; if str(▇▇.▇▇▇▇▇▇(r'\bfailed\b',data[0])) == 'None': nothing=0 else: print "\nPowering off blade "+str(blade)+" failed" outputcheck=1; if str(▇▇.▇▇▇▇▇▇(r'\brange\b',data[0])) == 'None': nothing=0 ...

Examples of Telnet in a sentence

• In a Telnet session, all communications, including username and password, are transmitted in plain-text, allowing anyone to listen-in on your session and steal passwords and other information.

• A screen scraper might connect to a legacy system via Telnet, emulate the keystrokes needed to navigate the legacy user interface, process the resulting display output, extract the desired data, and pass it on to a modern system.

• This limitation on authorized users includes, but is not limited to, hosting applications such as the provision of e‐mail, FTP, HTTP, VoIP, and Telnet access.

• Access any piece or segment of the CIS Wide Area Network of computing infrastructure via any telecommunications utility, for example, without limitation, Telnet and TCP/IP, other than as specified in CIS documentation and in a manner consistent with the documented access policy and procedures for CIS Application Software and Services; or .

• Pursuant to this Amendment, (the “Amendment”), International Telnet, Inc.

• Buyer has no claim, liability or obligation based upon or resulting from the Telnet Agreement.

• Examples of hacking and attacking include, but are not limited to the following: • Satan or port scans, full, half, FIN or stealth (packet sniffing) • SubSeven port probes • BO scans or attacks • Mail host relaying, mail proxying, or hi-jacking • Telnet, FTP, Rcommands, etc.

• Contractor shall prohibit the use of unencrypted protocols such as FTP and Telnet for the data identified in this paragraph.

• Buyer has delivered to Company a true and correct copy of the Joint Rescission of Stock Purchase and Acquisition Agreement between Buyer and Telnet World Communications, Inc.

• Telnet connection made via the Internet must be initiated to a separate which authenticates to the Partners Authentication database and Token Access System mentioned above..

More Definitions of Telnet

Telnet to the print server (e.g. “telnet 192.75.11.9”) and log in as “root”.

Telnet means a user command and an underlying TCP/IP protocol for accessing remote computers. Third party code review: means a software source code review performed by an independent expert.

Telnet telnet if password == "None":

Telnet telnet if password == "None": password= raw_input("Enter password.\n") password= password.rstrip('\n') key= raw_input("Paste the key contents below.\n") key= key.rstrip('\n') telnet = telnetlib.Telnet(host) #telent to find mm ▇▇▇▇▇▇.▇▇▇▇_until('username:',timeout=10) telnet.write(username+"\r") ▇▇▇▇▇▇.▇▇▇▇_until('password:',timeout=10) telnet.write(password+"\r") ▇▇▇▇▇▇.▇▇▇▇_until('system>',timeout=10) telnet.write("list -l a\r") data = ▇▇▇▇▇▇.▇▇▇▇_until('system>',timeout=10) number=▇▇.▇▇▇▇▇▇(r'\bprimary\b',data).start() #finds the string primary and gets number space where it starts newdata = data[number-10:number] #gets the primary mm string rules = re.compile('(\d+)') #sets rule to find first number match = ▇▇▇▇▇.▇▇▇▇▇▇(newdata) #executes rule to find first number which is the primary mm number mm=▇▇▇▇▇.▇▇▇▇▇(1) #assigns that number to primary mm telnet.write("users -" +userid+ " -pk -add " +key+ " -T mm[" +mm+"]\r") #adds key to profile data2 = ▇▇▇▇▇▇.▇▇▇▇_until('system>',timeout=10) telnet.write('exit\r') telnet.close() outputcheck=0; #checks if any if statements used if str(▇▇.▇▇▇▇▇▇(r'\bError\b',data2)) == 'None': #if statements for output nothing=0 else: print "\nError adding key to userid " +userid+ " profile." outputcheck=1; if str(▇▇.▇▇▇▇▇▇(r'\▇▇▇▇▇ defined\b',data2)) == 'None': nothing=0 else: print "\nThere is no user defined at userid " +userid+ "." outputcheck=1; if outputcheck == 0: print data2; if type == "ssh": #ssh key= raw_input("Paste the key contents below.\n") key= key.rstrip('\n') name= username + "@" + host #sets up ssh command data=[] data.append(os.popen("ssh " + name + " list -l a").read()) #executes list command number=▇▇.▇▇▇▇▇▇(r'\bprimary\b',data[0]).start() #finds the string primary and gets number space where it starts newdata = data[0][number-10:number] #gets the primary mm string rules = re.compile('(\d+)') #sets rule to find first number match = ▇▇▇▇▇.▇▇▇▇▇▇(newdata) #executes rule to find first number which is the primary mm number mm=▇▇▇▇▇.▇▇▇▇▇(1) #assigns that number to primary mm data2=[] data2.append(os.popen("ssh " + name + " users -" +userid+ " -pk -add " +key+ " -T mm[" +mm+"]").read()) #executes command to add key exitcodecheck=[] exitcodecheck.append(os.popen("echo $?").read()); value=exitcodecheck[0]; if int(value) != 0: #Checks Exit Code of ssh command if int(value) == 75: print "Operation was not performed because the device or MM was"; print "not in the correct state."; if int(value) == 70: print "Internal...