Separation Point definition

Separation Point means the point to be defined between the parties in the Development and Production Programme.
Sample 1Sample 2
Separation Point means the point at which lease level separation of Oil takes place.
Sample 1Sample 2
Separation Point means the point at which lease level separation of Oil takes place. "Series C and Series D Trust Indenture" shall mean that certain Indenture dated as of January 27, 1998, made in connection with the issuance of 11 1/2% Series C and Series D Senior Notes due November 1, 2004 by Seller and the Series C and Series D Trustee, as supplemented or amended from time to time, together with any other indenture governing such Series C and Series D Notes or any agreements extending the maturity of, refinancing, replacing or otherwise restructuring all or any portion of the Indebtedness under the Series C and Series D Notes. "Series C and Series D Trustee" shall mean either IBJ Whitehall Bank & Trust Company, successor-in-interest to IBJ Schroder Bank & Trust Company, or such other Person serving xx Xxxxtee under the Series C and Series D Trust Indenture.
Sample 1

Examples of Separation Point in a sentence

  • Hydrocarbons marketing or transportation costs of Hydrocarbons beyond the Separation Point.

  • The following two Definitions are added to Section 1: “Willamette Intake Facilities” means the fish screens, the intake pipe, the caisson (aka wet well), the pump station building, electric panel, conduit and wiring, and other appurtenances up to the System Separation Point, as defined in the Willamette Intake Facilities Intergovernmental Agreement.

  • The costs of field facilities, such as pipelines inside of the Separation Point, flow lines, production and treatment units, wellhead equipment, subsurface equipment, enhanced recovery systems, offshore platforms, petroleum storage facilities, export terminals and piers, harbours and related facilities, and access roads for production activities.

  • Upon completion of construction, the Board shall determine ownership of Capacity based on actual Capacity achieved of the Intake Facilities to the System Separation Point.

  • The Commission is created under this Agreement to own and manage the Intake Facilities in order to enable the Parties to this Agreement to draw water through the Intake Facilities to the System Separation Point and convey water to each Water Treatment Plant.

  • Intake Facilities shall mean the facilities used to withdraw and transmit water from the Willamette River to the Parties at the System Separation Point between the WRWTP and the Willamette Water Supply System Water Treatment Plant (“WWSS WTP”), as defined in the WIF Agreement, including the screens, intake pipe, wetwell, pump station building, pumps and associated electric and mechanical systems (e.g. wire, conduit, electrical devices and ventilation equipment).

  • He has finished his first book of poetry, Separation Point: At the Edge of Wildness, due to be published in 2015.

Related to Separation Point

  • Network Termination Point (NTP) means the physical point at which a subscriber is provided with access to a public communications network; in the case of networks involving switching or routing, the NTP is identified by means of a specific network address, which may be linked to a subscriber number or name;

  • Customer channel termination point means the location where the customer either inputs or receives the communications.

  • Service Switching Point (SSP) is a telephone central office switch equipped with a Signaling System 7 (SS7) interface.

  • Service Switching Point (SSP means the telephone Central Office Switch equipped with a Signaling System 7 (SS7) interface.

  • Demarcation Point means the point where Qwest owned or controlled facilities cease, and CLEC, End User Customer, premises owner or landlord ownership or control of facilities begin. "Designed, Verified and Assigned Date" or "DVA" means the date on which implementation groups are to report that all documents and materials have been received and are complete.

  • Destination Point means the delivery point(s) on Carrier’s System where Product is delivered to Shipper, as such points are specified in Section III of this tariff.

  • Injection Point means the Electric Interconnection Point.

  • Air gap separation means the unobstructed vertical distance through the free atmosphere between the lowest opening from any pipe or faucet supplying water to a tank, plumbing fixture, or other device and the overflow level rim of the receptacle, and shall be at least double the diameter of the supply pipe measured vertically above the flood level rim of the vessel, but in no case less than one inch.

  • Shift Cycle means the period of time when the shift schedule repeats itself. In those instances where the schedule does not repeat itself, the term "Shift Cycle" shall be understood to mean a period of time not exceeding twelve (12) weeks.

  • Valuation Point means such time as shall be specified in the relevant Supplement for each Fund.

  • Generator Forced Outage means an immediate reduction in output or capacity or removal from service, in whole or in part, of a generating unit by reason of an Emergency or threatened Emergency, unanticipated failure, or other cause beyond the control of the owner or operator of the facility, as specified in the relevant portions of the PJM Manuals. A reduction in output or removal from service of a generating unit in response to changes in market conditions shall not constitute a Generator Forced Outage.

  • Connection Point means an exit point or an entry point or a bidirectional point identified or to be identified as such in an access contract.

  • Development Location Point means a single point selected by the Applicant on the proposed Development site that is located within 100 feet of a residential building existing or to be constructed as part of the proposed Development. For a Development which consists of Scattered Sites, this means a single point on the site with the most units that is located within 100 feet of a residential building existing or to be constructed as part of the proposed Development.

  • Interconnection Point means the point(s) of connection(s) at which the project is connected to the grid i.e. it shall be at 11 / 22 kV bus bar level of substation of MSEDCL.

  • Self-service storage facility or "facility" means any real property designed or used for the purpose of renting or leasing individual storage space to tenants who are to have access to that space for the purpose of storing and removing personal property.

  • Generator Planned Outage means the scheduled removal from service, in whole or in part, of a generating unit for inspection, maintenance or repair with the approval of the Office of the Interconnection in accordance with the PJM Manuals.

  • Collection Point means the collection point for the Vehicle specified in the Confirmation and/or Rental Agreement;

  • Service/s has the meaning set forth in letter D. of the Preamble.

  • Process Gas means gas used for which altemate fuels, other than another gaseous fuel, are not technically feasible such as in applications requiring precise temperature controls and precise flame characteristics.

  • Cloud Service means any distinct, subscription-based, hosted, supported and operated on-demand solution provided by SAP under an Order Form.

  • Service Start Date means the date on which services were first supplied under this Agreement.

  • Semi-annual (2/Year) sampling frequency means the sampling shall be done during the months of June and December, unless specifically identified otherwise.

  • Basic generation service or "BGS" means electric generation

  • Vapor balance system means a combination of pipes or hoses which create a closed system between the vapor spaces of an unloading tank and a receiving tank such that vapors displaced from the receiving tank are transferred to the tank being unloaded.

  • INTER-CONNECTION POINT/ DELIVERY/ METERING POINT means a single point at 220kV or above, where the power from the Project(s) is injected into the identified ISTS Substation (including the dedicated transmission line connecting the Projects with the substation system) as specified in the RfS document. Metering shall be done at this interconnection point where the power is injected into. For interconnection with grid and metering, the WPDs shall abide by the relevant CERC/ SERC Regulations, Grid Code and Central Electricity Authority (Installation and Operation of Meters) Regulations, 2006 as amended and revised from time to time.

  • Yearly (1/Year) sampling frequency means the sampling shall be done in the month of September, unless specifically identified otherwise in the effluent limitations and monitoring requirements table.