Examples of Power Requirement in a sentence
The Shutdown Power Cost shall be calculated in accordance with Equation D-1c: Equation D-1c Shutdown Power Cost ($) = Shutdown Power Requirement (MWh) Energy Price ($/MWh) The Energy Price shall be equal to the total auxiliary power (including Energy for Shutdowns) costs charged to the Facility by its supplier of end-use Energy for the billing cycle in which the Shutdown was initiated divided by the total auxiliary power (including Energy for Shutdowns) consumed at the Facility during such billing cycle.
Power Requirement (KVA)17.5 LIST OF APPROVED MAKES 17.6 Specifications of Air Conditioner Split type air conditioners conforming to IS:1391(Part-2)-1992 with amendment No.1 fitted with hermetically sealed air compressor operating on refrigerant R-22 suitable for wall mounting and conforming to following specifications.
The Shutdown Power Cost shall be calculated in accordance with Equation D-1c: Shutdown Power Cost ($) = Shutdown Power Requirement (MWh) Energy Price ($/MWh) The Energy Price shall be equal to the total auxiliary power (including Energy for Shutdowns) costs charged to the Facility by its supplier of end-use Energy for the billing cycle in which the Shutdown was initiated divided by the total auxiliary power (including Energy for Shutdowns) consumed at the Facility during such billing cycle.
Measured Idle State power (PIDLE) shall be less than or equal to the Maximum Idle State Power Requirement (PIDLE_MAX), as calculated per Equation 1.
The Power Requirement will be met by sourcing the power from Punjab State Power Corporation limited from nearby Sub-station.
The Shutdown Power Cost shall be calculated in accordance with Equation D-1c: Equation D-1c Shutdown Power Cost ($) = Shutdown Power Requirement (MWh) 🟏 Energy Price ($/MWh) The Energy Price shall be equal to the total auxiliary power (including Energy for Shutdowns) costs charged to the Facility by its supplier of end-use Energy for the billing cycle in which the Shutdown was initiated divided by the total auxiliary power (including Energy for Shutdowns) consumed at the Facility during such billing cycle.
Current is roughly independent of the number of cells. Module Resistance: applied voltage divided by current, typically expressed in ohms. Power Requirement: electrical power needed to supply the necessary current and voltage.
Power Requirement will be required for mining operations and transportation will be met through diesel.
ON), as measured per the ENERGY STAR test method (referenced in Table 6), shall be less than or equal to the Maximum On Mode Power Requirement (PON_MAX), as calculated and rounded per Table 1, below.
SDI1 Slot EO-100 OE-101 EO-100 OE-101 SDI2 Slot OE-101 EO-100 OE-101 EO-100 HFO Connector Canare FCFR (SMPTE, Female) Canare FCMR (SMPTE, Male) Canare OCFR(Jananese, Female) Canare OCMR (Japanese, Male) SDI I/O Connector 2x 75 ohm BNC EXT Connector 2x XLR3 Female 2x XLR3 Male 2x XLR3 Female 2x XLR3 Male Power Requirement AC100 to 240V, DC 12V Power Consumption Max.