Memory Test definition

Memory Test. 393216 K OK”, then you have the required 384 MB of memory. You can also determine your RADAR®’s memory by going to the SYSTEM MENU, selecting SYSTEM INFO, and then using the [?] key to scroll down to the INSTALLED RAM menu. If you see a value less than 393216 Kbytes, you need to add memory before installing the 3.39 software. Note that the maximum amount of memory that may be installed in RADAR® is 768 MB. System Drive Ribbon Cable If you will be burning CD-R or DVD-R disks using a multi drive, an 80-wire ribbon cable is required for both the IDE system drive and the DVD multi drive. If your RADAR® was built prior to February 25, 2003, you may need to upgrade your cabling before burning disks. Requirements for the Adrenaline® Plus Card Memory The Adrenaline® Plus card requires 768 MB of host memory (RAM). Note that 768 MB is the maximum amount of memory that may be installed in RADAR®. Audio Drive If you have an Adrenaline® Plus card installed and plan to use the 24 TRACKS AT 192 KHz mode, you must use an iZ approved audio drive that is capable of handling the high throughput of audio data. High Sample Rate Projects Audio recorded at sample rates above 48 KHz is handled differently by the Adrenaline® Plus card. To convert existing high sample rate projects to this mode, export them (before installing the Adrenaline® Plus card) to a temporary folder on the system drive (or to any drive of your choice). Then, after installing the card, import the projects to an iZ-approved high performance audio drive. Installing Version 3.39 software on your RADAR® Note: RADAR software is no longer released on floppy disks, but can be installed via the web, FTP, or CD. See below for details.
Sample 1Sample 2
Memory Test. 393216 K OK”, then you have the required 384 MB of memory. You can also determine your RADAR’s memory by going to the SYSTEM MENU, selecting SYSTEM VERSION, then using the ↓ key to scroll down to the INSTALLED RAM menu. If you see a value less then 393216 Kbytes, you need to add memory before installing the 3.30 software. Installing the Version 3.30 software on your RADAR 24: Note: You can only install Version 3.30 if you currently have Version 3.20 or later installed. Before you begin the upgrade, make sure you have a backup of current sessions. This is a standard precaution. You do not have to select “UPGRADE SYSTEM” before installing the new software. You can also mount drives from old versions of RADAR and they will automatically be upgraded to 3.30. This will work for any RADAR 24 drive, and also with drives from RADAR II Version 2.20 or later. If a drive is to be loaded from a RADAR II unit running older software you must first choose “UPGRADE SYSTEM” from the SYSTEM menu on the RADAR II to prepare the drive. If you decide to revert to an earlier version of software after installing 3.30, you must first either “UPGRADE SYSTEM” or “MAKE PORTABLE”. You must also do this with any drive that you want to load into any RADAR 24 running earlier software. RADAR24 install software can now be transferred via floppy, CD, FTP over a network or FTP from a PC or Mac computer using an Ethernet cross-over cable. Check the requirements below to see which method is best for you. Install from Floppy
Sample 1
Memory Test. 393216 K OK”, then you have the required 384 MB of memory. You can also determine your RADAR's memory by going to the SYSTEM MENU, selecting SYSTEM VERSION, and then using the ↓ key to scroll down to the INSTALLED RAM menu. If you see a value less then 393216 Kbytes, you need to add memory before installing the 3.37 software. Note that the maximum amount of memory that may be installed in RADAR is 768 MB. System Drive Ribbon Cable If you will be burning CD-R or DVD-R disks using a multi drive (like the Panasonic SW-9573), an 80-wire ribbon cable is required for both the IDE system drive and the DVD multi drive. If your RADAR was built prior to February 25, 2003, you may need to upgrade your cabling before burning disks. Requirements for the Adrenaline®Plus Card Memory The Adrenaline®Plus card requires 768 MB of host memory (RAM). Note that 768 MB is the maximum amount of memory that may be installed in RADAR. Audio Drive If you have an Adrenaline®Plus card installed and plan to use the 24 TRACKS AT 192 KHz mode, you must use an iZ approved audio drive that is capable of handling the high throughput of audio data. High Sample Rate Projects Audio recorded at sample rates above 48 KHz is handled differently by the Adrenaline®Plus card. To convert existing high sample rate projects to this mode, export them (before installing the Adrenaline®Plus card) to a temporary folder on the system drive (or to any drive of your choice). Then, after installing the card, import the projects to an iZ approved high performance audio drive.
Sample 1

Examples of Memory Test in a sentence

  • Ensure the DIAGNOSTIC indicator illuminates when one of the following faults are detected: Internal Watchdog fault, Memory Test fault, or Internal power supply fault.

  • Revision of the Brief Visuospatial Memory Test: Studies of normal performance, reliability, and validity.

  • General Purpose Memory Test: This test verifies that all volatile system memory address and data buses can be written to and read from.

  • Rates of Impaired Episodic Memory on a Modified Logical Memory Test Compared to the CERAD Word Recall Test.

  • An Investigation of MPI and Type of Memory Test of Memory Accuracy Danielle M Rumschik, MA/MS, University of Ontario Institute of Technology; Garrett L.

  • Digital Controller Startup and Memory Test: Demonstrate that programming is not lost after a power failure, and digital controllers automatically resume proper control after a power failure.

  • Measuring episodic memory across the lifespan: NIH Toolbox Picture Sequence Memory Test.

  • Mild Cognitive Impairment and Objective Instrumental Everyday Functioning: The Everyday Cognition Battery Memory Test.

  • Operationalizing memory impairment for elderly persons: the Guild Memory Test.

  • Psychometric cha- racteristics of the Rivermead Behavioural Memory Test (RBMT) as an early detection instrument for dementia and mild cognitive impairment in Brazil.


More Definitions of Memory Test

Memory Test. 393216 K OK”, then you have the required 384 MB of memory. You can also determine your RADAR's memory by going to the SYSTEM MENU, selecting SYSTEM VERSION, then using the ↓ key to scroll down to the INSTALLED RAM menu. If you see a value less then 393216 Kbytes, you need to add memory before installing the 3.32 software. System Drive Ribbon Cable If you will be burning CD-R or DVD-R disks using a multi drive (like the Panasonic SW-9571), an 80-wire ribbon cable is required for both the IDE system drive and the DVD multi drive. If your RADAR was built prior to February 25, 2003, you may need to upgrade your cabling before burning disks.
Sample 1
Memory Test. 393216 K OK”, then you have the required 384 MB of memory. You can also determine your RADAR’s memory by going to the SYSTEM MENU, selecting SYSTEM VERSION, then using the ↓ key to scroll down to the INSTALLED RAM menu. If you see a value less then 393216 Kbytes, you need to add memory before installing the 3.32 software. System Drive Ribbon Cable If you will be burning CD-R or DVD-R disks using a multi drive (like the Panasonic SW-9571), an 80-wire ribbon cable is required for both the IDE system drive and the DVD multi drive. If your RADAR was built prior to February 25, 2003, you may need to upgrade your cabling before burning disks. Installing the Version 3.32 software on your RADAR 24: Note: Before you begin the upgrade, make sure you have a backup of current sessions. This is a standard precaution. • If you are installing the downloadable version of the 3.32 software from the xxx.xxxxxx.xxx web site, you must have Version 3.30 or later installed before proceeding. • If you are installing the full version of the 3.32 software, you can install if you currently have Version 3.20 or later installed. Warning: Tape backups made in version 3.30 or 3.31 from an audio drive initialized for 64K clusters can only be restored in these two versions. If you have backed up to tape from a 64K drive using 3.30 or 3.31 software, there are two ways you can proceed:
Sample 1

Related to Memory Test

  • COVID-19 test means a viral test for SARS-CoV-2 that is:

  • DNS test Means one non-­‐recursive DNS query sent to a particular “IP address” (via UDP or TCP). If DNSSEC is offered in the queried DNS zone, for a query to be considered answered, the signatures must be positively verified against a corresponding DS record published in the parent zone or, if the parent is not signed, against a statically configured Trust Anchor. The answer to the query must contain the corresponding information from the Registry System, otherwise the query will be considered unanswered. A query with a “DNS resolution RTT” 5 times higher than the corresponding SLR, will be considered unanswered. The possible results to a DNS test are: a number in milliseconds corresponding to the “DNS resolution RTT” or, undefined/unanswered.

  • RDDS test Means one query sent to a particular “IP address” of one of the servers of one of the RDDS services. Queries shall be about existing objects in the Registry System and the responses must contain the corresponding information otherwise the query will be considered unanswered. Queries with an RTT 5 times higher than the corresponding SLR will be considered as unanswered. The possible results to an RDDS test are: a number in milliseconds corresponding to the RTT or undefined/unanswered.

  • Screening Test means a drug or alcohol test which uses a method of analysis allowed by the Minnesota Drug and Alcohol Testing in the Workplace Act to be used for such purposes.

  • Performance Test means all operational checks and tests required to determine the performance parameters including inter-alia capacity, efficiency and operating characteristics of the Stores as specified in the Contract.

  • EPP test Means one EPP command sent to a particular “IP address” for one of the EPP servers. Query and transform commands, with the exception of “create”, shall be about existing objects in the Registry System. The response shall include appropriate data from the Registry System. The possible results to an EPP test are: a number in milliseconds corresponding to the “EPP command RTT” or undefined/unanswered.

  • Drug test means a test designed to detect the illegal use of a controlled substance.

  • Fit test means the use of a protocol to qualitatively or quantitatively evaluate the fit of a respirator on an individual.

  • Genetic test means an analysis of human DNA, RNA, chromosomes, proteins, or metabolites, that detect genotypes, mutations, or chromosomal changes. The term “genetic test” does not mean an analysis of proteins or metabolites that does not detect genotypes, mutations, or chromosomal changes; or an analysis of proteins or metabolites that is directly related to a manifested disease, disorder, or pathological condition that could reasonably be detected by a health care professional with appropriate training and expertise in the field of medicine involved.

  • Penetration Testing means security testing in which assessors mimic real-world attacks to identify methods for circumventing the security features of an application, system, or network. (NIST SP 800-115)

  • Test means such test as is prescribed by the particulars or considered necessary by the Inspecting Officer whether performed or made by the Inspecting Officer or any agency acting under the direction of the Inspecting Officer;

  • Percolation test means a subsurface soil test at the depth of a proposed absorption system or similar component of an OWTS to determine the water absorption capability of the soil, the results of which are normally expressed as the rate at which one inch of water is absorbed. The rate is expressed in minutes per inch.

  • Acceptance Test is a test of the Features executed by the Customer to prepare the acceptance.

  • Performance Tests means the tests to be conducted on the equipment at site for checking the performance parameters of the equipment as defined in Technical Specification.

  • Operational Acceptance Tests means the tests specified in the Technical Requirements and Agreed Project Plan to be carried out to ascertain whether the System, or a specified Sub system, is able to attain the functional and performance requirements specified in the Technical Requirements and Agreed Project Plan, in accordance with the provisions of GCC Clause 27.2 (Operational Acceptance Test).

  • Quantitative fit test or "QNFT" means an assessment of the adequacy of respirator fit by numerically measuring the amount of leakage into the respirator.

  • Cannabis testing facility means an entity registered by

  • Acceptance Testing mean the tests, reviews and other activities that are performed by or on behalf of Agency to determine whether the Deliverables meet the Acceptance Criteria or otherwise satisfy the Agency, as determined by the Agency in its sole discretion.

  • Genetic testing means an analysis of genetic markers to exclude or identify a man as the father or a woman as the mother of a child. The term includes an analysis of one or a combination of the following:

  • Drug use test means a scientifically substantiated method to test for the presence of illegal or performance-enhancing drugs or the metabolites thereof in a person’s urine.

  • Collateral Quality Test means a test that is satisfied if, as of any date of determination, in the aggregate, the Collateral Loans owned (or in relation to a proposed acquisition of a Collateral Loan, both owned and proposed to be owned) by the Borrower satisfy each of the tests set forth below, calculated in each case in accordance with Section 1.3:

  • Start-Up Testing means the completion of applicable required factory and start-up tests as set forth in Exhibit C.

  • Asset Test means, for an Asset Review, each Test, as defined in the Asset Representations Review Agreement, in Schedule A to the Asset Representations Review Agreement to be performed by the Asset Representations Reviewer on the related Asset Review Receivables.

  • Covenant Testing Period means a period (a) commencing on the last day of the fiscal quarter of Borrower most recently ended prior to a Covenant Trigger Event for which Borrower is required to deliver to Administrative Agent quarterly or annual financial statements pursuant to Section 5.2 of this Agreement, and (b) continuing through and including the first day after such Covenant Trigger Event that Availability has equaled or exceeded the greater of (i) 10% of the Borrowing Limit, and (ii) $15,000,000 for 60 consecutive calendar days.

  • Test cycle means a sequence of test points each with a defined speed and torque to be followed by the engine under steady state (WHSC) or transient operating conditions (WHTC).

  • Design Criteria Package means concise, performance-oriented drawings or specifications for a public construction project. The purpose of the Design Criteria Package is to furnish sufficient information to permit Design-Build Firms to prepare a bid or a response to the District’s Request for Proposals, or to permit the District to enter into a negotiated Design- Build Contract. The Design Criteria Package must specify performance- based criteria for the public construction project, including the legal description of the site, survey information concerning the site, interior space requirements, material quality standards, schematic layouts and conceptual design criteria of the project, cost or budget estimates, design and construction schedules, site development requirements, provisions for utilities, stormwater retention and disposal, and parking requirements applicable to the project. Design Criteria Packages shall require firms to submit information regarding the qualifications, availability, and past work of the firms, including the partners and members thereof.