Grease removal device definition

Grease removal device or “GRD” shall mean a concrete, fiberglass, or fiberglass-
Sample 1Sample 2
Grease removal device means a grease trap, grease interceptor, or other device (i.e., hydromechanical) that is designed, constructed, and intended to remove, hold, or otherwise prevent the passage of fats, oil, and grease to the sanitary sewer.
Sample 1Sample 2
Grease removal device means an interceptor or other mechanical device designed, constructed and intended to remove, hold or otherwise prevent the passage of grease to the sanitary sewer.
Sample 1Sample 2

Examples of Grease removal device in a sentence

  • Table 8.1 EBMUD Approved Grease Haulers FOG Control PlanPort of OaklandName of HaulerPhone NumberA-1 Septic Tank Service, Inc.(510) 886-4455A-1 Septic – Little River(707) 937-0496Able Septic Tank Service(408) 377-9990 All Valley Environmental, Inc.8.2.4 Grease Removal Device Requirements‌EBMUD requires FSFs to install grease interceptors (if not already installed) if any of the following three conditions are met:1.


More Definitions of Grease removal device

Grease removal device means an interceptor, trap or other mechanical device designed, constructed and intended to remove, hold or otherwise prevent the passage of grease to the sanitary sewer. "Hazardous material" means any material so designated by Title 17 of this code. "Hazardous waste" means a material designated as a hazardous waste by 40 CFR Part 261 or California Code of Regulations (CCR) Title 22, Division 4.5, Chapter 11. "Industrial user" means any person that discharges, causes, or permits the discharge of industrial waste into a city sewer or storm
Sample 1
Grease removal device means any device, unit, or installation for separating and retaining waterborne fats, oils, and greases, or grease complexes as well as settleable solids prior to discharge of wastewaters to the sanitary sewer system, including, but not limited to, a grease interceptor, grease trap, or other mechanical device approved by the Building Official or Director.
Sample 1

Related to Grease removal device

  • Graffiti remover means a product labeled to remove spray paint, ink, marker, crayon, lipstick, nail polish, or shoe polish, from a variety of noncloth or nonfabric substrates. “Graffiti Remover” does not include “Paint Remover or Stripper,” “Nail Polish Remover,” or “Spot Remover.” Products labeled for dual use as both a paint stripper and graffiti remover are considered “Graffiti Removers.”

  • Bug and tar remover means a product labeled to remove either or both of the following from painted motor vehicle surfaces without causing damage to the finish:

  • Legend Removal Date shall have the meaning ascribed to such term in Section 4.1(c).

  • Monitoring device means the total equipment used to measure and record (if applicable) process parameters.

  • Removal Date means, with respect to the Removed Accounts designated hereby, , .

  • Loose-fitting facepiece means a respiratory inlet covering that is designed to form a partial seal with the face.

  • Paint remover or stripper means any product designed to strip or remove paints or other related coatings, by chemical action, from a substrate without markedly affecting the substrate. “Paint Remover or Stripper” does not include “Multi-purpose Solvent,” paint brush cleaners, products designed and labeled exclusively as “Graffiti Remover,” and hand cleaner products that claim to remove paints and other related coatings from skin.

  • Removal Notice shall have the meaning specified in Section 2.07(b).

  • Adhesive remover means a product designed to remove adhesive from either a specific substrate or a variety of substrates. “Adhesive Remover” does not include products that remove adhesives intended for use on humans or animals.

  • Acceptance Test is a test of the Features executed by the Customer to prepare the acceptance.

  • Individual monitoring devices means devices designed to be worn by a single individual for the assessment of dose equivalent. For purposes of these regulations, "personnel dosimeter" and "dosimeter" are equivalent terms. Examples of individual monitoring devices are film badges, thermoluminescent dosimeters (TLDs), pocket ionization chambers, optically stimulated luminescence (OSL) dosimeters and personal air sampling devices.

  • Tight-fitting facepiece means a respiratory inlet covering that forms a complete seal with the face.

  • Acceptance Testing mean the tests, reviews and other activities that are performed by or on behalf of Agency to determine whether the Deliverables meet the Acceptance Criteria or otherwise satisfy the Agency, as determined by the Agency in its sole discretion.

  • Generator Operator means the Person that Operates the Generating Facility and performs the functions of supplying electric energy and interconnected operations services within the meaning of the NERC Reliability Standards.

  • Gasket or thread locking adhesive remover means a product designed or labeled to remove gaskets or thread locking adhesives. Products labeled for dual use as a paint stripper and gasket remover and/or thread locking adhesive remover are considered “Gasket or Thread Locking Adhesive Remover.”

  • Addition (to an existing building means an extension or increase in the floor area or height of a building or structure.

  • Acceptance Tests means those tests performed during the Performance Period which are intended to determine compliance of Equipment and Software with the specifications and all other Attachments incorporated herein by reference and to determine the reliability of the Equipment.

  • Generator Owner means the Person that owns the Generating Facility and has registered with the NERC as the Person responsible for complying with all NERC Reliability Standards applicable to the owner of the Generating Facility.

  • Liquid-mounted seal means a primary seal mounted in continuous contact with the liquid between the tank wall and the floating roof around the circumference of the tank.