Fire Test Procedures Code definition

Fire Test Procedures Code means the IMO Code for Application of Fire Test Procedures;
Sample 1Sample 2Sample 3
Fire Test Procedures Code means the International Code for Application of Fire Test Procedures as adopted by the Maritime Safety Committee of the Organization by resolution MSC.61(67), as may be amended by the Organization, provided that such amendments are adopted, brought into force and take effect in accordance with the provisions of article VIII of the present Convention concerning the amendment procedures applicable to the annex other than chapter I thereof.
Sample 1Sample 2Sample 3
Fire Test Procedures Code means the International Code for Application of Fire Test Procedures as defined in chapter II-2 of the 1974 SOLAS Convention, as amended.
Sample 1Sample 2Sample 3

Examples of Fire Test Procedures Code in a sentence

  • The test methods shall be in accordance with the Fire Test Procedures Code.

  • This Code is applicable for products which are required to be tested, evaluated and approved in accordance with the Fire Test Procedures Code as referenced in the Convention.

  • In new vessels this should be determined in accordance with the Fire Test Procedures Code.

  • For fire protection items, the USCG approves “SOLAS” materials using the IMO Fire Test Procedures Code and the IMO Fire Safety Systems Code.

  • Vapour barriers and adhesives used in conjunction with insulation, as well as the insulation of pipe fittings for cold service systems need not be of non-combustible material, but they shall be kept to the minimum quantity practicable and their exposed surfaces shall have low flame characteristics, this being determined in accordance with the IMO Fire Test Procedures Code.

  • Non-combustible material: a material which is neither capable of burning nor of giving off flammable vapours in such quantity as to be capable of spontaneous combustion when heated to approximately 750ºC, as determined by the IMO Fire Test Procedures Code.

  • West Yorkshire Testing Services Report 61098 Upholstery Furniture test to IMO A.652 (16) Annex 1, Part 8 of the Fire Test Procedures Code, Resolution MSC.61 (67).

  • What you did would have taken my hours of research and still I wouldn't feel as confident in my ability because I'm not up to date about how certain areas of a contract 2019.

  • Low flame spread" means that the surface thus described will adequately restrict the spread of flame, this being determined by a fire test in accordance with IMO Fire Test Procedures Code.

  • The following arrangements shall be tested in accordance with the Fire Test Procedures Code: .1 fire dampers, including their relevant means of operation, however, the testing is not required for dampers located at the lower end of the duct in exhaust ducts for galley ranges, which must be of steel and capable of stopping the draught in the duct; and .2 duct penetrations through "A" class divisions.


More Definitions of Fire Test Procedures Code

Fire Test Procedures Code means the International Code for Application of Fire Test Procedures adopted by the Maritime Safety Committee of IMO by resolution MSC.61(67), as may be amended by IMO.
Sample 1Sample 2
Fire Test Procedures Code means the International Code for Application of Fire Test
Sample 1Sample 2
Fire Test Procedures Code means the International Code for Application of Fire Test Procedures, 2010 (2010 FTP Code), as defined in chapter II-2 of the Convention.
Sample 1
Fire Test Procedures Code means the International Code for Application of Fire Test Procedures as adopted by the Maritime Safety Committee of the IMO by resolution MSC.61(67), as may be amended by the IMO, provided that such amendments are adopted, brought into force and take effect in accordance with the
Sample 1
Fire Test Procedures Code means the International Code for Application of Fire Test Procedures as adopted by the Maritime Safety Committee of the IMO by resolution
Sample 1

Related to Fire Test Procedures Code

  • Access Code means the Railways (Access) Code 2000;

  • Liquidation Process Regulations means, the Insolvency and Bankruptcy Board of India (Liquidation Process) Regulations 2016 as amended from time to time;

  • AML/KYC Procedures means the customer due diligence procedures of a Reporting Finnish Financial Institution pursuant to the anti-money laundering or similar requirements of Finland to which such Reporting Finnish Financial Institution is subject.

  • Access Codes means the unique codes which the Client will determine to enable his/her access to the trading platform of the Company and/or to his/her Trading Account through the Company’s electronic systems.

  • TBS Access Code means any code or number as may be prescribed by the Bank to enable the Account Holder to operate any Telephone Banking Service and includes but is not limited to such access codes known as the Customer Identification Number (“CIN”) and/or the Telephone Personal Identification Number (“T-PIN”) (as the case may be).

  • ERCOT Protocols means the document adopted by ERCOT, including any attachments or exhibits referenced in that document, as amended from time to time, that contains the scheduling, operating, planning, reliability, and Settlement (including Customer registration) policies, rules, guidelines, procedures, standards, and criteria of ERCOT. For the purposes of determining responsibilities and rights at a given time, the ERCOT Protocols, as amended in accordance with the change procedure(s) described in the ERCOT Protocols, in effect at the time of the performance or non-performance of an action, shall govern with respect to that action.

  • Staff Vetting Procedure means the Authority’s procedures for the vetting of personnel and as advised to the Contractor by the Authority.

  • Staff Vetting Procedures means the Authority’s procedures for the vetting of personnel and as advised to the Contractor by the Authority.

  • Large Facility Interconnection Procedures or “LFIP”) shall mean the interconnection procedures applicable to an Interconnection Request pertaining to a Large Generating Facility that are included in Attachment X of the NYISO OATT. Standard Large Generator Interconnection Agreement (“LGIA”) shall mean this Agreement, the form of interconnection agreement applicable to an Interconnection Request pertaining to a Large Generating Facility, that is included in Attachment X of the NYISO OATT. System Deliverability Upgrades shall mean the least costly configuration of commercially available components of electrical equipment that can be used, consistent with Good Utility Practice and Applicable Reliability Requirements, to make the modifications or additions to Byways and Highways and Other Interfaces on the existing New York State Transmission System and Distribution System that are required for the proposed project to connect reliably to the system in a manner that meets the NYISO Deliverability Interconnection Standard at the requested level of Capacity Resource Interconnection Service. System Protection Facilities shall mean the equipment, including necessary protection signal communications equipment, required to (1) protect the New York State Transmission System from faults or other electrical disturbances occurring at the Large Generating Facility and (2) protect the Large Generating Facility from faults or other electrical system disturbances occurring on the New York State Transmission System or on other delivery systems or other generating systems to which the New York State Transmission System is directly connected. System Upgrade Facilities shall mean the least costly configuration of commercially available components of electrical equipment that can be used, consistent with Good Utility Practice and Applicable Reliability Requirements, to make the modifications to the existing transmission system that are required to maintain system reliability due to: (i) changes in the system, including such changes as load growth and changes in load pattern, to be addressed in the form of generic generation or transmission projects; and (ii) proposed interconnections. In the case of proposed interconnection projects, System Upgrade Facilities are the modifications or additions to the existing New York State Transmission System that are required for the proposed project to connect reliably to the system in a manner that meets the NYISO Minimum Interconnection Standard. Tariff shall mean the NYISO Open Access Transmission Tariff (“OATT”), as filed with the Commission, and as amended or supplemented from time to time, or any successor tariff. Trial Operation shall mean the period during which Developer is engaged in on-site test operations and commissioning of the Large Generating Facility prior to Commercial Operation.

  • Enforcement Procedures means the procedures for the enforcement of Mortgages from time to time in accordance with the relevant Seller’s Policy;

  • Auction Procedures means the Auction Procedures that are set forth in Paragraph 10 of the Articles Supplementary.

  • Ordering Procedures means the ordering and award procedures specified in Clause 6 (Ordering Procedures) and Framework Schedule 5 (Ordering Procedure);

  • Complaints Procedure means the School's procedure for handling complaints from parents, as amended from time to time for legal or other substantive reasons, or in order to assist the proper administration of the School. It does not form part of the contract between you and the School. A copy of the most up-to-date procedure is on the School's website and is otherwise available from the School at any time upon request;

  • Direct Ordering Procedure means the ordering procedure set out in paragraph 2 of Schedule 5 (Ordering Procedure) of this Framework Agreement;

  • Commissioning Tests means all of the procedures and tests which, in accordance with the Reasonable and Prudent Standard, and in compliance with industry guidelines, practices and standards, are:

  • Settlement Procedures means the Settlement Procedures attached hereto as Exhibit A.

  • Commissioning test means tests applied to the Generating Facility, after completion of the construction of the Generating Facility, in order to verify that the Generating Facility may be released for Operation.

  • Claims Procedure Order means the Order under the CCAA establishing a claims procedure in respect of the Applicant, as same may be further amended, restated or varied from time to time.

  • health and safety specification means a site, activity or project specific document prepared by the client pertaining to all health and safety requirements related to construction work;

  • Security Procedures means rules and regulations governing access to, and health and safety procedures while on, Government premises; and information technology security protocols;

  • Social Engineering Security Procedures means security procedures intended to prevent Social Engineering Fraud as set forth in the Application and/or as otherwise provided in writing to the Underwriter.

  • Acceptance Testing mean the tests, reviews and other activities that are performed by or on behalf of Agency to determine whether the Deliverables meet the Acceptance Criteria or otherwise satisfy the Agency, as determined by the Agency in its sole discretion.

  • Diagnostic clinical procedures manual means a collection of written procedures that describes each method (and other instructions and precautions) by which the licensee performs diagnostic clinical procedures; where each diagnostic clinical procedure has been approved by the authorized user and includes the radiopharmaceutical, dosage, and route of administration.

  • Reconciliation Procedures has the meaning set forth in Section 2.3(a) of this Agreement.

  • Drug use test means a scientifically substantiated method to test for the presence of illegal or performance-enhancing drugs or the metabolites thereof in a person’s urine.