Ethernet Circuit definition

Ethernet Circuit or "Circuit" shall mean two end points on an UNI and/or NNI connected by an EVC. "Ethernet Interconnect Interface" or "Ell" shall mean that physical point to point segment or portion of the ETS which typically connects Buyer's centralized aggregation point to Seller's Ethernet cloud. The Ell is typically used in a hub and spoke architecture and can also be used in a point to point architecture. The Ell does not include an EVC. An Ell consists of a service multiplexed NNI whereby IEEE 802.1q vlan tags signify respective EVCs for directing Ethernet frames.
Sample 1Sample 2Sample 3
Ethernet Circuit. , ‘Circuit’ means a Service delivered into the Customer’s Premises over fibre or copper which are
Sample 1
Ethernet Circuit is similar to a leased line, but is generally a fibre based product to the point of entry into a building (except where the ‘tail circuit’ is provided as copper on an EFM technology). However, Ethernet circuits differ in that they are always presented as either an RJ45 connection (copper twisted pair Cat5e patch cable) or as a fibre patch cable presentation (termination type to be specified). Ethernet circuits operate at the International standard IEEE 802.3. Ethernet circuits are available usually at incremental speeds of 1Mb or 2Mb, where the minimum circuit speed is 1Mb, and the maximum will be multi gigabit circuits. “Excess Construction Charges/Fee (ECCs)” means when TSI or Gamma or another third party decree that the installation costs originally quoted (or which were included over the term if these costs are amortised) are not enough to cover the actual cost of the installation works. Such costs are known as excess construction fees or charges (ECCs), and these fees (where applicable) will be notified to the customer post site survey. Failure to accept or reject ECCs within 14 working days will result in a cancelled order. The full process is detailed in section 3.
Sample 1

Examples of Ethernet Circuit in a sentence

  • Ethernet Circuit capacities must be priced as a 10Gbps, 40Gbps, and 100Gbps.

  • The Facility was eligible for Criterion C in the 2015 MSGP and there has been no change in the Facility’s action area and there are no additional threatened or endangered species or designated critical habitats listed by the U.S. Fish and Wildlife Service (USFWS) and/or the NMFS in the action area since certification under Criterion C in the 2015 MSGP.

  • Early Termination Fee: An Early Termination Fee will apply for early termination during any Fixed Term Contract period or prior to the Minimum Period For Service being reached, unless termination is on the grounds of the failure or inadequacy of the Ethernet Circuit, not meeting acceptable performance in respect of availability and fault repair restoration times as measured against accepted good industry practice.

  • Duration of the Client’s Connection: Unless your connection is for a Fixed Term Contract as specified in “Application for Supply of Layer 2 Ethernet Circuit Connection” NTL’s Minimum Period of Service is 12 months from connection to your premises.

  • It should not be assumed that an Ethernet tail circuit will be Fibre Optic as it may be provisioned over a copper circuit depending on what infrastructure has been deployed by the local telecom providers.For the purposes of the RMDCN, Ethernet circuits are available in 3 main variants based on the bandwidth of the circuit: 10Mbps Ethernet Circuit: (Referred to as Ethernet) These circuits present an interface with a 10Mbps interface.

  • The commission shall determine the programs or projects, or both, to be funded and the amount of reimbursement for each program or project.

  • Approve Additional Services From AT&T California Under Proposal No. 18/19-3 WAN Ethernet Services for the Period of July 1, 2021, Through June 30, 2022, for an Increase of the Current 2GB Ethernet Circuit to a 4GB Ethernet Circuit at the Education Services and Support Center; and Addition of One (1) 250MB Ethernet Circuit for the Otay Ranch Village 3 New School Project L.

  • AFOSI opened an investigation into illegal drug activity by one of the appellee’s roommates (A1C JF).

  • Connectivity among these facilities and programs would alleviate the long-term monthly recurring cost we pay to an Ethernet Circuit provider ($96,000 annually).

  • Circuit Requests: Requests for circuits are to be made on NTL’s standard “Application for Supply of Layer 2 Ethernet Circuit Connection” form either in hardcopy or through our web portal.


More Definitions of Ethernet Circuit

Ethernet Circuit means a high-speed ethernet bandwidth service delivered over Fibre Optic Cable which may or may not provide access to the Internet depending on whether it is a DIA, MIA or Point to Point.
Sample 1

Related to Ethernet Circuit

  • integrated circuit means a product, in its final or an intermediate form, in which the elements, at least one of which is an active element, and some or all of the interconnections are integrally formed in and on, or in or on, a piece of material and which is intended to perform an electronic function;

  • Electrical circuit means an assembly of connected high voltage live parts which is designed to be electrically energized in normal operation.

  • Circuit means an analogue voice-grade or digital 64 Kbps (DS-0) channel.

  • Ethernet means a family of computer networking technologies for LANs.

  • Chip means an integrated circuit embedded in the Card.

  • Router means a modem or router provided by us for use by you in connection with the Broadband Service.

  • Synchronous Optical Network (SONET means the optical interface standard that allows inter-networking of transmission products from multiple vendors. The base rate is 51.84 Mbps (“OC 1/STS 1”) and higher rates are direct multiples of the base rate, up to 13.22 Gbps.

  • Module means specific portion of the Application Software designated as such in the Documentation made available to the Customer under the Notification Form.

  • Interface means the mixture occurring in pipeline operations between adjoining batches having similar or dissimilar physical characteristics.

  • Filter means material placed in the useful beam to preferentially absorb selected radiations.

  • Interoperability means the ability of a Qwest OSS Function to process seamlessly (i.e., without any manual intervention) business transactions with CLEC's OSS application, and vice versa, by means of secure exchange of transaction data models that use data fields and usage rules that can be received and processed by the other Party to achieve the intended OSS Function and related response. (See also Electronic Bonding.)

  • Stack means any point in a source designed to emit solids, liquids, or gases into the air, including a pipe or duct but not including flares.

  • Synchronous Optical Network (SONET) is an optical interface standard that allows inter-networking of transmission products from multiple vendors. The base rate is 51.84 Mbps (“OC-1/STS-1”) and higher rates are direct multiples of the base rate, up to 13.22 Gbps.

  • Socket is a socket occupied by a CPU on a System or Physical Node. For purposes of this Exhibit 1.A, a “Socket-pair” is up to two sockets each occupied by a CPU on a System or Physical Node. A “System on a Chip” or “SOC(s)” is a single integrated circuit that includes the major components of a computer and is generally recognized as a system on a chip. A “Virtual Guest” is an instance of the Software that is executed, in whole or in part, on a System that is a virtual machine. When you deploy a guest operating system in a virtualized environment, you are responsible for securing the required license rights for any third party operating systems or other software that you use.

  • Interconnector means equipment used to link the electricity system of the State to electricity systems outside of the State;

  • PNode has the meaning set forth in the CAISO Tariff.

  • System Software means Software that provides the operating and management instructions for the underlying hardware and other components, and is identified as such in Appendix 4 of the Contract Agreement and such other Software as the parties may agree in writing to be Systems Software. Such System Software includes, but is not restricted to, micro-code embedded in hardware (i.e., “firmware”), operating systems, communications, system and network management, and utility software.

  • Modules means the Base Modules and Extended Modules.

  • Subsystem means any subset of the System identified as such in the Contract that may be supplied, installed, tested, and commissioned individually before Commissioning of the entire System.

  • Connector means a flanged, screwed, welded, or other joined fitting used to connect two pipelines or a pipeline and a piece of process equipment.

  • Sensor means any measurement device that is not part of the vehicle itself but installed to determine parameters other than the concentration of gaseous and particle pollutants and the exhaust mass flow.

  • Digital network means any online-enabled application, software, website or system offered or utilized by a transportation network company that enables the prearrangement of rides with transportation network company drivers.

  • Server Software means software that provides services or functionality on a computer acting as a server.

  • SDK means the JetBrains Rider Software Development Kit and specifically including any associated JetBrains Rider software files, documentation, software code or other materials made available by JetBrains and any third-party software programs that are owned and licensed by parties other than JetBrains and that are either integrated with or made part of the SDK (collectively, “Third-Party Software”).

  • Signal means any transmission of radio frequency energy or of optical information.

  • Fiber means a glass strand or strands which is/are protected by a color coded buffer tube and which is/are used to transmit a communication signal along the glass strand in the form of pulses of light.