Base Warranty definition

Base Warranty has the meaning set forth in Section 4(c) of this Agreement.
Sample 1Sample 2Sample 3
Base Warranty means the standard warranty in place for the sale of new Polestar cars as per Polestar’s standard terms and conditions for the prevailing number of years of warranty that Distributor provides for new Polestar cars.
Sample 1
Base Warranty means the limited warranty provided by Westport to purchasers of HPDI Vehicles in respect of failures of component parts of the HPDI System;
Sample 1

Examples of Base Warranty in a sentence

  • Such bonds or irrevocable letters of credit shall be valid to the end of the Base Warranty Period.

  • Such bonds or irrevocable letters of credit shall be valid to the end of the Base Warranty Period as defined in Article 9.1 of the Pro Forma Contract.

  • GRDA and Contractor agree that the following definitions will be applicable to this Contract: Base Warranty Period – the period commencing with the Completion of Project and ending one (1) year thereafter.

  • Contractor warrants that the Project, including all equipment and work to be provided, will conform to all specifications which are part of the Contract Documents, will be free of defects in workmanship or material, and will be designed for the purposes stated in the Contract Documents for a Base Warranty Period of one (1) year commencing from the date of the fully executed Certificate of Contract Completion.

  • If GRDA discovers any failure to conform to the foregoing warranties during the Base Warranty Period, and GRDA gives Contractor written notice within thirty (30) days after the expiration of such Base Warranty Period, then Contractor will promptly correct such nonconformity at Contractor’s sole cost and expense.

  • Base Warranty: Manufacturer shall provide base warranty coverage on the material and workmanship of the generator set for a minimum of twenty-four (24) months for Standby product and twelve (12) months for Prime/Continuous product from registered commissioning and start-up.

  • Such bonds or irrevocable letters of credit shall be valid to the end of the Base Warranty Period as defined in Article 9.1 of the Pro Forma Contract, whichever is sooner.

  • Base Warranty Period – the period commencing with the Completion of Work and ending one (1) year thereafter.

  • Contractor warrants that the Project, including all equipment and work to be provided, will conform to all specifications which are part of the Contract Documents, will be free of defects in workmanship or material, and will be designed for the purposes stated in the Contract Documents for a Base Warranty Period of one (1) year commencing from the date of completion of the installation.

  • Base Warranty Period – shall mean the period commencing with the completion of installation and ending one (1) year thereafter.

Related to Base Warranty

  • Limited Warranty means the limited warranties and your coverage provided by IKO for your Shingles as expressly set out in this document, and are the only warranties being provided by IKO.

  • Manufacturer’s Warranty means the warranty supplied from time to time by the manufacturer of the Goods as at the date of the acceptance of the Statement of Work; “PPSA” means the Personal Property Securities Xxx 0000; “Price” means the amount specified within each Statement of Work (subject to any Variation) or as otherwise specified from the Company to the Customer representing the cost for the Works; “Related Work” means any additional building, carpentry, painting, plastering, plumbing or other work or other trades that the Customer requires, which are not to be carried out by the Company; “Services” means the services provided by the Company to the Customer as part of the Works, which may include without limitation the installation of Goods; “Services Delay Charge” means the services delay charge (if any) set out in the Statement of Work; “Services Interruption Event” means any interruption to a Works caused by; a Force Majeure Event, the Customer’s failure to carry out or perform any obligation required of it under this agreement which in the sole opinion of the Company does or may cause a delay in the Works and any other matter which in the reasonable opinion of the Company will cause an interruption or delay in the performance of the Works; “Statement of Work” means the details outlining the provision of the Works, which statement can be delivered verbally or in writing (including email) and may include (where applicable) an estimate or quotation (as specifically expressed as the case) of costs; “Variation” means a change in the Statement of Work including the specifications, scope, time of supply, price or scale of the Works and such variation shall form part of this agreement; “Workmanship” means a good and high quality and standard of delivery in connection with the Services performed; “Works” means the supply of Goods and the provision of Services to the Customer as per each Statement of Work;

  • Extended Warranty means an agreement for a specified duration to

  • Express warranty means an express warranty as set forth in sections 4-2-313 and 4-2.5-210, C.R.S. An express warranty shall cover every part of a new facilitative device.

  • Product Warranty has the meaning set forth in Section 9.3.

  • Indemnification Provisions means each of the Debtors’ indemnification provisions in place immediately prior to the Effective Date whether in the Debtors’ bylaws, certificates of incorporation, other formation documents, board resolutions, the 2008 Bond Documents, or contracts for the current and former directors, officers, managers, employees, attorneys, other professionals, and agents and such current and former directors, officers, and managers’ respective Affiliates.

  • Letter of Representations means any applicable agreement between the Issuer and the applicable Clearing Agency, with respect to such Clearing Agency’s rights and obligations (in its capacity as a Clearing Agency) with respect to any Book-Entry Securitization Bonds.

  • Certificate of Conformance means a document issued by the NCWM based on testing by a participating laboratory that constitutes evidence of conformance of a type.

  • Warranties - means collectively any and all warranties (if any) given by the Bidder in terms of this agreement.

  • Custom Materials means Materials developed by the Supplier at the Procuring Entity's expense under the Contract and identified as such in Appendix 5 of the Contract Agreement and such other Materials as the parties may agree in writing to be Custom Materials. Custom Materials includes Materials created from Standard Materials.

  • Supply Agreement has the meaning set forth in Section 7.2.

  • service delivery agreement means an agreement between the Municipality and an institution or persons mentioned in section 76(b) of the Local Government: Municipal Systems Act 32 of 2000.

  • Statement of Work means the description of activities performed in completing the Project, as specified in the Contract and as may be amended.

  • Improvement warranty means an applicant's unconditional warranty that the

  • Defects Liability Period (Warranty Period) means the period stated in the Schedule A Special Stipulations, following the taking over, during which the Contractor is responsible for making good defects and damage in accordance with Clause 15.

  • The Software means the software designed and developed by the Bidder or the Bidder’s Personnel, and includes the source code and object code along with associated documentation, which is the work product of the development efforts envisaged in the Terms of Reference. It does not include commercial off-the-shelf licensed software (except for the customisation components of such products).

  • Custom Software means Software identified as such in Appendix 4 of the Contract Agreement and such other Software as the parties may agree in writing to be Custom Software.

  • common specifications means a document, other than a standard, containing technical solutions providing a means to comply with certain requirements and obligations established under this Regulation;

  • Certificate of Conformity means Executive Order certifying vehicles for sale in California.

  • Standard form contract means a financial contract that is substantially not negotiable for the Client, except for the terms contained in point 11.C.

  • Breach of Agreement provisions of Section 5(a)(ii) will apply to Party A and will not apply to Party B.

  • Certification Regarding Venue" Terms with TIPS Members Vendor agrees that if any "Venue" provision is included in any sales agreement/contract between Vendor and a TIPS Member, that clause must provide that the "Venue" for any litigation or alternative dispute resolution is shall be in the state and county where the TIPS Member operates unless the TIPS Member expressly agrees otherwise. Any TIPS Sale Supplemental Agreement containing a "Venue" clause that conflicts with these terms is rendered void and unenforceable. If Vendor disagrees, after this solicitation legally closes and TIPS begins evaluating Vendor's file, TIPS will provide Vendor with a draft Word Document version of the Vendor Agreement and will be instructed to include all requested negotiations as redline edits for TIPS consideration. Does Vendor agree? Yes Certification Regarding "Automatic Renewal" Terms with TIPS Members Vendor agrees that no TIPS Sale may incorporate an "Automatic Renewal" clause that exceeds month to month terms with which the TIPS Member must comply. All renewal terms incorporated into a TIPS Sale Supplemental Agreement shall only be valid and enforceable when Vendor received written confirmation of acceptance of the renewal term from the TIPS Member for the specific renewal term. The purpose of this clause is to avoid a TIPS Member inadvertently renewing a Supplemental Agreement during a period in which the governing body of the TIPS Member has not properly appropriated and budgeted the funds to satisfy the Agreement renewal. Any TIPS Sale Supplemental Agreement containing an "Automatic Renewal" clause that conflicts with these terms is rendered void and unenforceable. If Vendor disagrees, after this solicitation legally closes and TIPS begins evaluating Vendor's file, TIPS will provide Vendor with a draft Word Document version of the Vendor Agreement and will be instructed to include all requested negotiations as redline edits for TIPS consideration. Does Vendor agree? Yes Certification Regarding "Indemnity" Terms with TIPS Members Texas and other jurisdictions restrict the ability of governmental entities to indemnify others. Vendor agrees that if any "Indemnity" provision which requires the TIPS Member to indemnify Vendor is included in any sales agreement/contract between Vendor and a TIPS Member, that clause must either be stricken or qualified by including that such indemnity is only permitted, "to the extent permitted by the laws and constitution of [TIPS Member's State]" unless the TIPS Member expressly agrees otherwise. Any TIPS Sale Supplemental Agreement containing an "Indemnity" clause that conflicts with these terms is rendered void and unenforceable. If Vendor disagrees, after this solicitation legally closes and TIPS begins evaluating Vendor's file, TIPS will provide Vendor with a draft Word Document version of the Vendor Agreement and will be instructed to include all requested negotiations as redline edits for TIPS consideration. Does Vendor agree? Yes Certification Regarding "Arbitration" Terms with TIPS Members Vendor agrees that if any "Arbitration" provision is included in any TIPS Sale agreement/contract between Vendor and a TIPS Member, that clause may not require that the arbitration is mandatory or binding. Vendor agrees that if any "Arbitration" provision is included in any TIPS Sale agreement/contract between Vendor and a TIPS Member, that clause provides for only voluntary and non-binding arbitration unless the TIPS Member expressly agrees otherwise. Any TIPS Sale Supplemental Agreement containing a “Arbitration” clause that conflicts with these terms is rendered void and unenforceable. If Vendor disagrees, after this solicitation legally closes and TIPS begins evaluating Vendor's file, TIPS will provide Vendor with a draft Word Document version of the Vendor Agreement and will be instructed to include all requested negotiations as redline edits for TIPS consideration. Does Vendor agree? Yes

  • Tax Warranties means the warranties contained in Part 2 of Schedule 8;

  • Project Deliverables means the Project deliverables set out in Schedule 2. Project Material means all the material including but not limited to documents, computer software, and data stored by any means which is created by the Fellow in the course of undertaking the Project.

  • Independent Software Vendor or “ISV” means a Person that makes available to Participants and Authorized Traders a system or platform offering smart order routing, front-end trading applications, an aggregation platform or a combination of the foregoing but that does not provide Participants or Authorized Traders with the ability to effect transactions other than through the Trading System.

  • Contract Specifications means the principal trading terms in CFD (for example Spread, Swaps, Lot Size, Initial Margin, Necessary Margin, Hedged Margin, the minimum level for placing Stop Loss, Take Profit and Limit Orders, financing charges, charges etc) for each type of CFD as determined by the Company from time to time.