Software Maintenance The Vendor represents and warrants that the Software delivered to the escrow agent pursuant to subsection 11.7 for redelivery to the Owner pursuant to the Escrow Agreement will be in a form suitable for reproduction by the Owner and will include the full Source Code language statement of the Software as used by the Vendor sufficient to allow maintenance and modification.
Maintenance and Support Services Distributor shall provide Maintenance and Support Services to all of its Customers of Licensed Software as set forth in Sections 3.4(a) and 3.4(b) below. Distributor may require Customers to provide the own First-Line Support: however, in no event shall Siebel be responsible for First-Line or Second-Line Support. Subject to Distributor's payment of the Maintenance Fees set forth in EXHIBIT A Siebel shall provide Third-Line Support to Distributor in accordance with Siebel's then current Maintenance and Support Services Policy. Distributor shall be responsible for all support related to the Value Added Offering.
Repairs; Maintenance and Compliance Borrower shall at all times maintain, preserve and protect all franchises and trade names, and Borrower shall cause the Property to be maintained in a good and safe condition and repair and shall not remove, demolish or alter the Improvements or Equipment (except for alterations performed in accordance with Section 5.4.2 below and normal replacement of Equipment with Equipment of equivalent value and functionality). Borrower shall promptly comply with all Legal Requirements and immediately cure properly any violation of a Legal Requirement. Borrower shall notify Lender in writing within two (2) Business Days after Borrower first receives notice of any such non-compliance. Borrower shall promptly repair, replace or rebuild any part of the Property that becomes damaged, worn or dilapidated and shall complete and pay for any Improvements at any time in the process of construction or repair.
Complete Release Executive agrees to release EDS from all claims or demands Executive may have against EDS, including, but not limited to, any claims related to Executive's employment with EDS or separation from that employment and any claims for attorney's fees and costs. This Agreement includes, without limitation, a release of any rights or claims Executive may have under the Age Discrimination in Employment Act, as amended, which prohibits age discrimination in employment; Title VII of the Civil Rights Act of 1964, as amended, which prohibits discrimination in employment based on race, color, national origin, religion or sex; the Americans with Disabilities Act, as amended, which prohibits discrimination against individuals with disabilities; the Fair Labor Standards Act, as amended, which regulates matters regarding compensation; the Family and Medical Leave Act, as amended, which regulates matters regarding certain types of leaves; or any other federal, state or local laws or regulations that in any way relate to the employment of individuals and/or prohibit employment discrimination of any form. This Agreement also includes, without limitation, a release by Executive of any related or unrelated wrongful discharge claims, contractual claims, tort claims or any other actions. This Agreement covers both claims that Executive knows about and those he/she may not know about. Executive expressly waives any right to assert after signing this Agreement that any claim, demand, obligation, or cause of action has through ignorance, oversight, or for any other reason, been omitted from the scope of Subsection 5 of Section III of this Agreement. Executive further promises never to file a lawsuit, demand, action or otherwise assert any claims that are released in Subsection 5 of Section III of this Agreement (excluding a lawsuit filed by Executive solely for purposes of challenging the validity of the Age Discrimination in Employment Act waiver). This Agreement does not include a release of (i) Executive's right, if any, to benefits Executive may be entitled to under any EDS plan qualified under Section 401(a) of the Internal Revenue Code, including the EDS Retirement Plan and EDS 401(k) Plan, and COBRA benefits pursuant to Internal Revenue Code section 4980B, (ii) any rights or claims Executive may have under the Age Discrimination in Employment Act which arise after the date Executive signs this Agreement, (iii) any rights pursuant to this Agreement, (iv) Executive's right, if any, to benefits Executive may be entitled to under the EDS Executive Deferral Plan, (v) any rights pursuant to any indemnification agreements between Executive and EDS, or (vi) Executive's right, if any, to benefits Executive may be entitled to under any applicable directors and officers or other liability insurance policies.
Mortgage Releases The terms of the related Mortgage or related Mortgage Loan documents do not provide for release of any material portion of the Mortgaged Property from the lien of the Mortgage except (a) a partial release, accompanied by principal repayment, or partial defeasance (as described in paragraph 34) of not less than a specified percentage at least equal to 110% of the related allocated loan amount of such portion of the Mortgaged Property, (b) upon payment in full of such Mortgage Loan, (c) upon a Defeasance (defined in paragraph 34 below), (d) releases of out-parcels that are unimproved or other portions of the Mortgaged Property which will not have a material adverse effect on the underwritten value of the Mortgaged Property and which were not afforded any value in the appraisal obtained at the origination of the Mortgage Loan and are not necessary for physical access to the Mortgaged Property or compliance with zoning requirements, or (e) as required pursuant to an order of condemnation. With respect to any partial release under the preceding clauses (a) or (d), either: (x) such release of collateral (i) would not constitute a “significant modification” of the subject Mortgage Loan within the meaning of Treasury Regulations Section 1.860G-2(b)(2) and (ii) would not cause the subject Mortgage Loan to fail to be a “qualified mortgage” within the meaning of Section 860G(a)(3)(A) of the Code; or (y) the mortgagee or servicer can, in accordance with the related Mortgage Loan documents, condition such release of collateral on the related Mortgagor’s delivery of an opinion of tax counsel to the effect specified in the immediately preceding clause (x). For purposes of the preceding clause (x), if the fair market value of the real property constituting such Mortgaged Property after the release is not equal to at least 80% of the principal balance of the Mortgage Loan (together with any related Pari Passu Companion Loans) outstanding after the release, the Mortgagor is required to make a payment of principal in an amount not less than the amount required by the REMIC Provisions. Exh. C-12 In the case of any Mortgage Loan, in the event of a taking of any portion of a Mortgaged Property by a State or any political subdivision or authority thereof, whether by legal proceeding or by agreement, the Mortgagor can be required to pay down the principal balance of the Mortgage Loan (together with any related Pari Passu Companion Loans) in an amount not less than the amount required by the REMIC Provisions and, to such extent, the award from any such taking may not be required to be applied to the restoration of the Mortgaged Property or released to the Borrower, if, immediately after the release of such portion of the Mortgaged Property from the lien of the Mortgage (but taking into account the planned restoration) the fair market value of the real property constituting the remaining Mortgaged Property is not equal to at least 80% of the remaining principal balance of the Mortgage Loan (together with any related Pari Passu Companion Loans). No such Mortgage Loan that is secured by more than one Mortgaged Property or that is cross-collateralized with another Mortgage Loan permits the release of cross-collateralization of the related Mortgaged Properties or a portion thereof, including due to a partial condemnation, other than in compliance with the REMIC Provisions.
Maintenance and Support Licensee is solely responsible for providing all maintenance and support to its customers of the Licensed Products. Licensor has, and shall have, no obligation to provide any maintenance or support to Licensee or any of Licensee’s customers with respect to any Technology and/or Licensed Products.
Access to and Maintenance of Auction Records The Auction Agent shall afford to the Company, its agents, independent public accountants and counsel, access at reasonable times during normal business hours to review and make extracts or copies (at the Company's sole cost and expense) of all books, records, documents and other information concerning the conduct and results of Auctions, provided that any such agent, accountant or counsel shall furnish the Auction Agent with a letter from the Company requesting that the Auction Agent afford such person access. The Auction Agent shall maintain records relating to any Auction for a period of two years after such Auction (unless requested by the Company to maintain such records for such longer period not in excess of four years, then for such longer period), and such records, in reasonable detail, shall accurately and fairly reflect the actions taken by the Auction Agent hereunder. The Company agrees to keep confidential any information regarding the customers of any Broker-Dealer received from the Auction Agent in connection with this Agreement or any Auction, and shall not disclose such information or permit the disclosure of such information without the prior written consent of the applicable Broker- Dealer to anyone except such agent, accountant or counsel engaged to audit or review the results of Auctions as permitted by this Section 2.7, provided that the Company reserves the right to disclose any such information if it is advised by its counsel that its failure to do so would (i) be unlawful or (ii) expose it to liability, unless the Broker-Dealer shall have offered indemnification satisfactory to the Company. Any such agent, accountant or counsel, before having access to such information, shall agree to keep such information confidential and not to disclose such information or permit disclosure of such information without the prior written consent of the applicable Broker-Dealer, provided that such agent, accountant or counsel may reserve the right to disclose any such information if it is advised by its counsel that its failure to do so would (i) be unlawful or (ii) expose it to liability, unless the Broker-Dealer shall have offered indemnification satisfactory to such agent, accountant or counsel.
Pre-Release Subject to the further terms and provisions of this Section 2.10, the Depositary, its Affiliates and their agents, on their own behalf, may own and deal in any class of securities of the Company and its Affiliates and in ADSs. In its capacity as Depositary, the Depositary may (i) issue ADSs prior to the receipt of Shares (each such transaction a "Pre-Release Transaction") as provided below and (ii) Deliver Shares upon the receipt and cancellation of ADSs that were issued in a Pre-Release Transaction, but for which Shares may not yet have been received. The Depositary may receive ADSs in lieu of Shares under (i) above and receive Shares in lieu of ADSs under (ii) above. Each such Pre-Release Transaction will be (a) subject to a written agreement whereby the person or entity (the "Applicant") to whom ADSs or Shares are to be Delivered (1) represents that at the time of the Pre-Release Transaction the Applicant or its customer owns the Shares or ADSs that are to be Delivered by the Applicant under such Pre-Release Transaction, (2) agrees to indicate the Depositary as owner of such Shares or ADSs in its records and to hold such Shares or ADSs in trust for the Depositary until such Shares or ADSs are Delivered to the Depositary or the Custodian, (3) unconditionally guarantees to deliver to the Depositary or the Custodian, as applicable, such Shares or ADSs, and (4) agrees to any additional restrictions or requirements that the Depositary deems appropriate, (b) at all times fully collateralized with cash, United States government securities or such other collateral as the Depositary deems appropriate, (c) terminable by the Depositary on not more than five (5) Business Days' notice and (d) subject to such further indemnities and credit regulations as the Depositary deems appropriate. The Depositary will normally limit the number of ADSs and Shares involved in such Pre-Release Transactions at any one time to thirty percent (30%) of the ADSs outstanding (without giving effect to ADSs outstanding under (i) above), provided, however, that the Depositary reserves the right to disregard such limit from time to time as it deems appropriate. The Depositary may also set limits with respect to the number of ADSs and Shares involved in Pre-Release Transactions with any one person on a case by case basis as it deems appropriate. The Depositary may retain for its own account any compensation received by it in conjunction with the foregoing. Collateral provided pursuant to (b) above, but not the earnings thereon, shall be held for the benefit of the Holders (other than the Applicant).
Patent Maintenance All annuity and maintenance fees that are necessary in order to keep the Patents in force as of the Effective Date have been paid by Seller, and no payment of annuities or fees, or papers to be filed in patent offices, are required to be made within the three-month period after the Effective Date.
Software Modifications Company may request that BNYM, at Company’s expense, develop modifications to the software constituting a part of the Licensed System that BNYM generally makes available to customers for modification (“Software”) that are required to adapt the Software for Company’s unique business requirements. Such requests, containing the material features and functionalities of all such modifications in reasonable detail, will be submitted by Company in writing to BNYM in accordance with the applicable, commercially reasonable procedures maintained by BNYM at the time of the request. Company shall be solely responsible for preparing, reviewing and verifying the accuracy and completeness of the business specifications and requirements relied upon by BNYM to estimate, design and develop such modifications to the Software. BNYM shall have no obligation to develop modifications to the Licensed System requested by Company, but may in its discretion agree to develop requested modifications which it, in its sole discretion, reasonably determines it can accomplish with existing resources or with readily obtainable resources without disruption of normal business operations provided Company agrees at such time in writing to pay all costs and expenses, including out-of-pocket expenses, associated with the customized modification. BNYM shall be obligated to develop modifications under this Section 2.16 only upon the execution of and in accordance with a writing containing, to BNYM’s reasonable satisfaction, all necessary business and technical terms, specifications and requirements for the modification as determined by BNYM in its sole judgment (“Customization Order”) and Company’s agreement to pay all costs and expenses, including out-of-pocket expenses, associated with the customized modification (“Customization Fee Agreement”). All modifications developed and incorporated into the Licensed System pursuant to a Customization Order are referred to herein as “Company Modifications”. BNYM may make Company Modifications available to all users of the Licensed System, including BNYM, at any time after implementation of the particular Company Modification and any entitlement of Company to reimbursement on account of such action must be contained in the Customization Fee Agreement.
