STEEL WINDOWS Sample Clauses

STEEL WINDOWS. Steel windows shall conform to IS: 1038 and shall have brass oxidized fittings. They may be of composite sizes and assembled and fixed as per the manufacturers specifications using special mastic and putty for steel windows. The size of section shall be such as to be adequate for the specific type shown on the drawing. They shall have necessary accessories such as handles, stays, lugs, etc. The members shall be assembled with electric flush butt-welded joints/welded smooth joints as directed. These items include all types of windows such as fixed partially fixed, partially hinged, side hung, bottom hung, top hung, centre hung, etc. This item also includes windows of curved shapes and all other windows as specified and detailed by the Architects/consulting Engineers. The necessary accessories such as handles, stays, stoppers, etc. shall be brass oxidized and shall be included in this item. The rate also includes glazing panels with plain or ground glass with aluminium/teak wood beads of the required size and mastic putty of the same colour, which shall be applied for full length and not at intervals. The contractor shall provide windows with threaded holes for fixing aluminium/wooden beading, with screws, required for fixing of thickness specified. The windows shall have glazing fixed as shown in the drawing and the glass shall be float glass sheet glass of the best quality and approved by the Architect/Consulting Engineer. It shall be transparent or translucent as required by the Architect/Consulting Engineers. It shall be free from flaws, specks, and bubbles. Thickness of glass shall be as under (costs included in this item).
Sample 1
AutoNDA by SimpleDocs
STEEL WINDOWS. NOTE Windows shall be provided with chromium plated brass fittings All horizontal pivot windows to be fitted with cup keeps on pivot for maximum opening of 25 degrees The given sizes are overall, approximate and in the order of width and height. The detailed drawings and building must be carefully checked for exact sizes before placing orders. Any errors in this respect will be at the Contractor's expense and no claims for any extras in this regard will be entertained Where so described windows shall be provided with burglar bars to opening and fixed sections, consisting of 20 x 5mm mild steel flat sections to standard NBP2 pattern welded at intersections and to window frame Bars in front of fixed sections to be bent 75mm away from the glass surface Standard residential all bar type steel windows with burglar bars to fixed and opening sections 1 Window type E1H; size 533 x 654mm high (W3) Number 4 2 Window type E2H; size 1022 x 654mm (W2) Number 12 3 Window as type E4H size 1 511 x 654mm (W1) Number 4 Carried to Summary R Section No. 2 Bill No. 9 METALWORK SASRIA SOC LTD NQOBISIZWE CONSULTING Section No. 2 Bill No. 9 METALWORK SUMMARY Total Brought Forward from Page No. Page No -57- -58- -59- -60- Section No. 2 Bill No. 9 METALWORK Carried Forward to Summary of Section No. 2 SASRIA SOC LTD NQOBISIZWE CONSULTING Amount R Item No SECTION No. 2 BILL No. 10 PLASTERING PREAMBLES For Preambles see "Model Preambles For Trades"
Sample 1
STEEL WINDOWS. 9 Service window including lubricating ironmongery and leave in good workable condition, size 900 x 600mm. No 4
Sample 1
STEEL WINDOWS. Approved residential windows 77 Window type NC1, size 533 x 949mm high (W1) No 28 SCREEDS
Sample 1
STEEL WINDOWS. NOTE : Windows shall be provided with chromium plated brass fittings. All horizontal pivot windows to be fitted with cup keeps on pivot for maximum opening of 25° The given sizes are overall, approximate and in the order of width and height. The detailed drawings and building must be carefully checked for exact sizes before placing orders. Any errors in this respect will be at the Contractor's expense and no claims for any extras in this regard will be entertained Where so described windows shall be provided with burglar bars to opening and fixed sections, consisting of 12 x 12mm mild steel square sections to standard NBP2 pattern welded at intersections and to window frame. Bars in front of fixed sections to be bent 75mm away from the glass surface 100 Standard residential type steel windows with burglar bars to fixed and opening sections Window type code 5/2 size 1,143 x 0,854m No 120.00 101 Window type Code- 5 size 1,143 x 0,845m No 18.00
Sample 1

Related to STEEL WINDOWS

  • Utilities and Appliances (1) The owner must provide all utilities needed to comply with the HQS.

  • Check Meters Developer, at its option and expense, may install and operate, on its premises and on its side of the Point of Interconnection, one or more check meters to check Connecting Transmission Owner’s meters. Such check meters shall be for check purposes only and shall not be used for the measurement of power flows for purposes of this Agreement, except as provided in Article 7.4 below. The check meters shall be subject at all reasonable times to inspection and examination by Connecting Transmission Owner or its designee. The installation, operation and maintenance thereof shall be performed entirely by Developer in accordance with Good Utility Practice.

  • Crossing Picket Lines The Company will not expect an employee to cross a picket line, including a picket line at a customer site, if to do so would place the employee's life, limb or personal property in jeopardy.

  • Employees At-Risk Through Medication Use 5.1 Employees who are taking medication which might affect their ability to undertake any kind of work safely, should advise an OH&S representative or the First Aid Officer, who will act immediately to eliminate the risks.

  • Traffic Management The Customer will not utilize the Services in a manner which, in the view of the Centre Operator, significantly distorts traffic balance on the Centre Operator’s circuits which are shared with other users. If, in the reasonable view of the Centre Operator, the Customer’s traffic patterns cause or may cause such distortion, the Customer should have a dedicated circuit capability. If the Customer declines to do so then the Centre Operator may suspend the Services while the matter is being resolved. If there is no resolution within 5 business days then either party may terminate the Agreement.

  • Shiftwork 38.1 Shift Penalties (Excluding Home Care Classifications)

  • Cable Television, Telephone & Internet Services Long Distance calling may be done only through the use of a prepaid phone card or by charges made to a third party number if using a provided, in room telephone. Neither the Institution nor the Manager guarantees the availability of telephone service or cable television services. If the Resident wants additional cable television, telephone or internet service above and beyond any that may be provided as “standard” in the Residence, the Resident must submit full details to and request and obtain the prior written approval of the Manager and Institution. With respect to Internet Services, the Institution may at its discretion only allow either the standard provided service or the approved alternate service and not both at the same time (Residents will need to complete the Institution’s standard forms issued by their IT department). Cutting of wiring, boring of holes, the use of wireless routers, routers, or switches are not permitted. Any unauthorized services or equipment may be removed by the Manager, at the Resident’s expense, without notice or liability. All Residents are subject to the Institution’s and/or Service Provider’s current Internet, cable television and telephone enrolment and usage policies.

  • Travel, Meals and Lodging When provided for in the Mini-Bid and resultant Authorized User Agreement, an Authorized User may reimburse travel expenses. All rules and regulations associated with this travel can be found at xxxx://xxx.xxxxx.xx.xx/agencies/travel/travel.htm. In no case will any travel reimbursement be paid that exceeds these rates. All travel will be paid only as part of a deliverable specified within the Authorized User Agreement and must be billed with that associated Invoice with receipts attached. The Contractor shall receive prior approval from the Authorized User for any travel that occurs during the term of an Authorized User Agreement. Parking fees and/or parking tickets may not be paid by an Authorized User. Unless otherwise specified in writing by the Authorized User, a vehicle will not be provided by Authorized User to the Contractor for travel. Therefore, the Contractor will be responsible for ensuring that the Contractor has access to an appropriate vehicle (e.g., personal vehicle or rental vehicle) or common carrier with which to carry out any necessary travel. For the Contractor to obtain reimbursement for the use of a rental vehicle, such use must be justified as the most cost-effective mode of transportation under the circumstances (including consideration of the most effective use of time). The Contractor shall provide evidence of three (3) written or telephone price quotes, and the paid invoice must detail the type of vehicle rented, miles traveled, license plate number, and time of pickup and return. The Contractor is responsible for keeping adequate records to substantiate any claims for reimbursement, by personnel for travel in performance of the services.

  • Shift Rotation Routine shift rotation is not an approach to staffing endorsed by the Employer. Except for emergency situations where it may be necessary to provide safe patient care, shift rotation will not be utilized without mutual consent. If such an occasion should ever occur, volunteers will be sought first. If no one volunteers, the Employer will rotate shifts on an inverse seniority basis until the staff vacancies are filled.

  • Drop Shipped Off loaded by carrier to an Agency loading dock or designated area. There will be no charge to the ordering Agency for this delivery method.

Time is Money Join Law Insider Premium to draft better contracts faster.