Inner Portion of the Sample Clauses

Inner Portion of the. Approach Surface Drawings A plan showing the existing and future runway safety areas, runway protection zones, and associated approach areas will be developed for each runway end. Plan and profile views of each area will be developed identifying all physical obstructions. The obstruction's height and location will be noted by dimension lines. Any obstruction requiring removal or relocation to meet FAA standards will be noted and an action plan identified. A corresponding obstruction table will be provided with each approach surface identified. A separate table for each runway end must be used to enhance information clarity. In accordance with FAA SOP 2.00, the Inner Portion of the Approach Surface Drawings will be prepared depicting the plan and profile view of the area from the runway threshold out to where the ultimate approach surface slope is 100 feet above the threshold elevation, including existing and planned approach slopes, controlling structures and other objects penetrating approach surfaces using AGIS survey information from previous tasks. These drawing also will include a runway centerline profile that shows the full length of the runway and runway safety areas, the RSA, runway elevations, RSA gradients and all vertical curves. This may require additional drawing sheets to show runway vertical curves. The Inner Portion of the Approach Surface Drawings will be developed utilizing AutoCAD Civil 3D 2012 or the most current version.

Inner Portion of the. Approach Surfaces and Runway Protection Zone Drawings Description: Drawings containing the plan and profile view of the inner portion of the approach surface to the runway and a tabular listing of all surfaces penetrations. The drawing will depict the obstacle identification approach surfaces contained in 14 CFR Part 77. A large-scale plan and profile drawing will be prepared of the existing and ultimate inner portion of the 14 CFR Part 77 approach surfaces for each runway end. The plan and profile views for each runway end will be shown on the same sheet. The data obtained in the aeronautical survey will be used as the basis for developing the drawing. The drawing will include aerial photography as the base drawing and will depict the Runway Protection Zones and location, elevation, penetration, and disposition of obstructions exceeding Part 77 criteria. Included with these drawings will also be a runway centerline profile for the entire runway length. Responsibilities: • Consultant: Compile Inner Portion of the Approach Surfaces and Runway Protection Zone drawing. • Sponsor: Review and comment on Inner Portion of the Approach Surfaces and Runway Protection Zone drawing, if necessary. Output: Inner Portion of the Approach Surfaces and Runway Protection Zone drawing.