Approach Surfaces definition

Approach Surfaces means the imaginary inclined planes that extend upward and outward from each end of a Strip, which planes are more particularly described in Part II of the schedule;
Sample 1Sample 2Sample 3
Approach Surfaces means the imaginary inclined planes more particularly described in Part II of Appendix “A”;
Sample 1
Approach Surfaces means the imaginary inclined surface that extends upward and outward from each end of the strip surface and that is described in Part 2 of the schedule. (surface d’approche)
Sample 1

Examples of Approach Surfaces in a sentence

  • However, very low density residential uses may be permitted as long as no portion of any structure encroaches within the airport’s Approach Surfaces.

  • A sloping area beginning at the sides of the Primary and Approach Surfaces and sloping upward and outward at a ratio of 1:7 until it intersects the Horizontal Surface.

  • The Height Restriction Area is defined as the Approach Surfaces plus the Transitional Surfaces plus the Horizontal Surface plus the Conical Surface.

  • A surface extending outward and upward from the sides of the Primary Surface and from the sides of the Approach Surfaces at a slope of 7 to 1.

  • WECS within identified Future Approach Surfaces and Future Transitional Surfaces for the Watertown Regional Airport shall be subject to Federal Aviation Administration Approval.

  • Take-off Climb and Approach Surfaces for Main Runway Take-off climb and approach surfaces extend from each end of the main runway.

  • The principal accounting policies adopted are set out below: Turnover Turnover represents the income received and receivable for the licensing of the intellectual property rights.

  • Upward facing lighting must be carefully placed and designed, particularly in relation to those sites located within the Airport Take-Off and Approach Surfaces identified in Figures 13.1 & 13.2.Developers of sites should also be conscious of the need to ensure that outdoor lighting is directed in such a manner that will not adversely affect the safe and efficient operation of the road traffic.

  • Transitional Surface: These surfaces are located on each side of the runway and extend outward and upward on both sides of the runway at right angles to the runway centerline and runway centerline, extended at a slope of 7 to 1 from the sides of the Primary Surface and form the sides of the Approach Surfaces until they intersect with the Horizontal Surface.

  • All design parameters will be based on the established and proposed Airplane Design Group (ADG), Runway Design Code (RDC), Airport Reference Code (ARC), Approach Reference Code (APRC), Departure Reference Code (DPRC), and applicable Part 77 Approach Surfaces.


More Definitions of Approach Surfaces

Approach Surfaces means the imaginary inclined planes more particularly described in Part II of Schedule “A” and shown in blue in Schedule “B”;
Sample 1

Related to Approach Surfaces

  • Pervious surface means an area that releases as runoff a small portion of the precipitation that falls on it. Lawns, gardens, parks, forests or other similar vegetated areas are examples of surfaces that typically are pervious.

  • Impervious surface means a surface that has been covered with a layer of material so that it is highly resistant to infiltration by water.

  • Waterproofer means a product designed and labeled exclusively to repel water from fabric or leather substrates. Waterproofer does not include fabric protectants.

  • drainage work means any construction or reconstruction of or any alteration or addition to, or any work done in connection with a drainage installation but shall not include any work undertaken solely for purposes of repair or maintenance;

  • Landing area means that part of a movement area intended for the landing or take-off of aircraft;

  • Drainage area means a geographic area within which stormwater, sediments, or dissolved materials drain to a particular receiving waterbody or to a particular point along a receiving waterbody.

  • Structures means an elevated road or a flyover, as the case may be;

  • Users mean individuals who are authorized by Customer to use the Subscription Service, subject to the terms of this Agreement, and have been supplied user identifications and passwords by Customer. Users may include, for example, Customer’s and its Affiliates’ employees, consultants, clients, external users, contractors, agents and authorized third parties.

  • Footprint means the track width multiplied by the wheelbase as stated in the certificate of conformity and defined in sections 2.1 and 2.3 of Annex I to Directive 2007/46/EC;

  • Pavement means any type of improved surface that is within the public right-of-way and that is paved or otherwise constructed with bituminous, concrete, aggregate, or gravel.

  • Constructed wetlands means areas intentionally designed and created to emulate the water quality improvement function of wetlands for the primary purpose of removing pollutants from stormwater.

  • Configuration means State-specific changes made to the Software without Source Code or structural data model changes occurring.

  • Vegetation means trees, shrubs, nursery stock and other vegetation and includes the limbs or growth of any Vegetation.

  • Areas means such areas within the DAS Areas that are identified in Annexure A annexed to this Agreement;

  • Mine drainage means any drainage, and any water pumped or siphoned, from an active mining area or a post-mining area. The abbreviation “ml/l” means milliliters per liter.

  • Disinfectant means any oxidant, including but not limited to chlorine, chlorine dioxide, chloramines, and ozone added to water in any part of the treatment or distribution process, that is intended to kill or inactivate pathogenic microorganisms.

  • Filtering facepiece (dust mask) means a negative pressure particulate respirator with a filter as an integral part of the facepiece or with the entire facepiece composed of the filtering medium, not equipped with elastomeric sealing surfaces and adjustable straps.

  • Soil means all unconsolidated mineral and organic material of any origin.

  • Topsoil means a varying depth (up to 300 mm) of the soil profile irrespective of the fertility, appearance, structure, agricultural potential, fertility and composition of the soil;

  • Building site means a plot of land held for building purposes, whether any building is actually erected thereupon or not, and includes the open ground or courtyard enclosed by, or adjacent to, any building erected thereupon;

  • Communications Equipment means the communications equipment of the Licensee and its affiliates, including, without limitation, cabinets, racks, electronic equipment and other similar equipment.

  • Tandem parking means that two or more automobiles are parked on a driveway or in any other location on a lot, lined up behind one another.

  • Basement means any area of the building having its floor subgrade (below ground level) on all sides.

  • Landscape architect means a person who holds a license to practice landscape architecture in the state of California Business and Professions Code, Section 5615.

  • Intensity means the number of Program Unique Supervised Hours divided by the Duration for a course or qualification, being a measure of the concentration of training and assessment delivered from the Eligible Individual’s perspective.

  • Signage means advertising displays, hoardings, Glow signs, neon signs, LED signs, LCD signs, any digital signs, any sort of display intended to convey information and described in the schedule.