Furnishing Supplies, Etc. Employer shall furnish the following: xxxxx wheel, grindstone or workbench, mitre box, jackscrews (hand or thumbscrews that exceed six inches), glue pot, or heavy hammers, or xxxxx xxxx, exceeding three pounds (3 lbs.) in weight or heavy steel bars exceeding thirty inches (30") in length, or any other tools than those found in the ordinary Carpenters' tool chest, that are required on the job, ice water for drinking purposes for Carpenters, when the season of the year justifies and raincoats, boots and rain hats for all carpentry work, welding hoods, welding gloves, sleeves and welding or cutting goggles. Employee who checks out tool will exercise proper care of tool while in his possession to prevent loss or theft. Employees will furnish white xxxxxxxxx or millwright overalls or pile driver overalls and items of safety apparel such as hard hats, suitable substantial shoes, goggles, and will use such safety items as required by the Employer at all times and shall be subject to immediate discharge for failure to do so. The Employer shall initially furnish a respirator to his employee but if an additional respirator is needed, it shall be furnished by the employee. Any special color or material of hard hat, if required by the Employer, shall be furnished by the Employer. If saws are sent out to be sharpened, Employer shall pay cost of sharpening. Employees physically unable to work on stilts shall not be required to do so. OSHA approved stilts shall be furnished by the Employer.
