Economic parameters Sample Clauses

Economic parameters. 1. The Contracting Parties shall do everything necessary to achieve the objective set out in Article 33. To this end, they shall take steps to ensure that the carriage of goods by rail and combined transport across Switzerland, including accompanied combined transport, remains competitive, in terms of price and quality of service, with road transport over the same routes, while at the same time honouring guarantees regarding the independence of the railway undertakings.
AutoNDA by SimpleDocs
Economic parameters. The remaining parameters pertain to the economic cost of water supply and recharge. These include alternative price (p0i), the cost of abstraction (β), and the fixed and variable costs of recharge (c0rs and crs, respectively). Alternative price was determined by assuming water could be treated from lake Geneva using ultrafiltration, which is common in the region. The energy intensity of ul- trafiltration is approximately 0.1 kWh m-3, which itself represents about 30% of overall costs [Xxxx et al., 1998]. This results in water supply costs of 0.067 CHF m-3, assuming a cost of 0.2 CHF kWh-1 for electricity [Federal Electricity Commission ElCom, 2020], which gives a rough approximation of electricity prices in Geneva. This yields a cost of 67,000 CHF MCM-1 for the alternative source. The cost of abstraction was determined as the cost of energy to lift 1 m3 of water by 1 m. The energy to lift groundwater is 9.81 kJ m-3 m-1. Converting to kWh and assuming a pumping efficiency of 60%, this translates to an energy efficiency of 0.0045417 kWh m-3 m-1, or 908.33 CHF MCM-1 m-1. We round up to obtain an abstraction cost of 910 CHF MCM-1 m-1. The cost of recharge was determined via numbers provided by de los Xxxxx [2018], including the unit cost of recharge under two scenarios. In the first scenario with a total recharge rate of 20 MCM, the average unit cost of recharge is 0.07 CHF m-3. In the sec- ond scenario with a total recharge rate of 10 MCM, the average unit cost of recharge is 0.12 CHF m-3. Linear combination of these scenarios yields a fixed cost for the recharge facility of c0rs = 1 × 107 CHF and a variable cost of crs = 2 × 104 CHF MCM-1.

Related to Economic parameters

  • Measuring EPP parameters Every 5 minutes, EPP probes will select one “IP address” of the EPP servers of the TLD being monitored and make an “EPP test”; every time they should alternate between the 3 different types of commands and between the commands inside each category. If an “EPP test” result is undefined/unanswered, the EPP service will be considered as unavailable from that probe until it is time to make a new test.

  • Measuring DNS parameters Every minute, every DNS probe will make an UDP or TCP “DNS test” to each of the public-­‐DNS registered “IP addresses” of the name servers of the domain name being monitored. If a “DNS test” result is undefined/unanswered, the tested IP will be considered unavailable from that probe until it is time to make a new test.

  • Parameters In calculating the MtM Exposure for each Transaction, the following parameters are set on the Transaction Date: ▪ On-Peak Initial Xxxx Xxxxx ▪ Off-Peak/On-Peak Price Ratio ▪ Off-Peak Initial Xxxx Xxxxx ▪ MW-Measure: initial Capacity PLC Per Tranche ▪ On-Peak Estimated Energy Quantity Per MW-Measure for each of the twelve calendar months ▪ Off-Peak Estimated Energy Quantity Per MW-Measure for each of the twelve calendar months ▪ Number of awarded Tranches In calculating the MtM Exposure for each Transaction, the following parameters are set each Trading Day subsequent to the Transaction Date: ▪ On-Peak Forward Price ▪ Off-Peak Forward Price ▪ Current Capacity PLC Per Tranche ▪ On-Peak Estimated Energy Quantity ▪ Off-Peak Estimated Energy Quantity Process to Update the On-Peak Initial Mark Prices and Off-Peak Initial Mark Prices on a Daily Basis On each Trading Day subsequent to the Transaction Date, the Pricing Agent will contact four Reference Market-Makers to obtain price quotes for on-peak and off-peak energy for PJM Western Hub. The Pricing Agent may not rely upon quotes from Seller or any Affiliate of Seller. The updated mark for a month will be equal to the average mark for that month over all sources from which a quote is available. If a monthly quote is available from any source, only the monthly quote or monthly quotes shall be used. Where quotes provide a bid and ask, the average shall be used. Where a quote for an individual month is unavailable, but the month is quoted as part of a “packaged” quote (e.g., January 2011 is only available in the form of a January/February 2011 “packaged” quote or an annual quote): ▪ If the other month/months of the package quote is/are also unavailable, then the marks for all months of the package will be calculated by multiplying the packaged quote by the ratio of the corresponding month to the corresponding calculated package quote from the previous day. Example: There are no On-Peak quotes available on day X during the contract for July 2011 or August 2011. However, there is an On-Peak July/August 2011 packaged quote of $73.00/MWh available. The On-Peak marks from day X-1 for July 2011 and August 2011 were $73.50/MWh and $76.50/MWh respectively. The day X On-Peak mark for July 2011 is set at 73.00 * [73.50] / [( (73.50 * 352) + (76.50 * 336) ) / (352+336) ] = 73 * (73.50/ 74.97) = $71.57/MWh. The day X On-Peak mark for August 2011 is set at 73.00 * [76.50] / [( (73.50 * 352) + (76.50*336) ) / (352+336) ] = 73 * (76.50 / 74.97) = $74.49/MWh. ▪ If the other month/months of the package quote is/are available, then the mark for the month will be set such that the average of the month and the other month(s) (weighted for either the On-Peak Hours or Off-Peak Hours as applicable) equals the packaged quote (see calculation example below).

  • Project Parameters As used herein, “Project Parameters” shall mean: (a) the Product Design Requirements (“PDR”); (b) the PSD which includes the Instrument Specifications; (c) the Reliability Program Plan; (d) the Project Planning Documents, including the Project Schedule, containing a list of Milestones and the dates of completion for those Milestones; (e) the Project Proposal; (f) Acceptance Criteria; and (g)

  • Prescription Drug Quantity Limits We limit the quantity of certain prescription drugs that you can get at one time for safety, cost-effectiveness and medical appropriateness reasons. Our clinical criteria for quantity limits are subject to our periodic review and modification. Quantity limits may restrict: • the amount of pills dispensed per thirty (30) day period; • the number of prescriptions ordered in a specified time period; or • the number of prescriptions ordered by a provider, or multiple providers. Our formulary indicates which prescription drugs have a quantity limit. Types of Pharmacies Prescription drugs and diabetic equipment or supplies can be bought from the following types of pharmacies: • Retail pharmacies. These dispense prescription drugs and diabetic equipment or supplies. • Mail order pharmacies. These dispense maintenance and non-maintenance prescription drugs and diabetic equipment or supplies. • Specialty pharmacies. These dispense specialty prescription drugs, defined as such on our formulary. For information about our network retail, mail order, and specialty pharmacies, visit our website or call our Customer Service Department.

  • Target Population The Grantee shall ensure that diversion programs and services provided under this grant are designed to serve juvenile offenders who are at risk of commitment to Department.

  • Safety Measures Awarded vendor shall take all reasonable precautions for the safety of employees on the worksite, and shall erect and properly maintain all necessary safeguards for protection of workers and the public. Awarded vendor shall post warning signs against all hazards created by the operation and work in progress. Proper precautions shall be taken pursuant to state law and standard practices to protect workers, general public and existing structures from injury or damage.

  • Cash Basis and Budget Laws The right of the City to enter into this Agreement is subject to the provisions of the Cash Basis Law (K.S.A. 10-1112 and 10-1113), the Budget Law (K.S.A. 79-2935), and all other laws of the State of Kansas. This Agreement shall be construed and interpreted so as to ensure that the City shall at all times stay in conformity with such laws, and as a condition of this Agreement the City reserves the right to unilaterally sever, modify, or terminate this Agreement at any time if, in the opinion of its legal counsel, the Agreement may be deemed to violate the terms of such laws.

  • Cooperation with Economic Studies If ICANN initiates or commissions an economic study on the impact or functioning of new generic top-­‐level domains on the Internet, the DNS or related matters, Registry Operator shall reasonably cooperate with such study, including by delivering to ICANN or its designee conducting such study all data related to the operation of the TLD reasonably necessary for the purposes of such study requested by ICANN or its designee, provided, that Registry Operator may withhold (a) any internal analyses or evaluations prepared by Registry Operator with respect to such data and (b) any data to the extent that the delivery of such data would be in violation of applicable law. Any data delivered to ICANN or its designee pursuant to this Section 2.15 that is appropriately marked as confidential (as required by Section 7.15) shall be treated as Confidential Information of Registry Operator in accordance with Section 7.15, provided that, if ICANN aggregates and makes anonymous such data, ICANN or its designee may disclose such data to any third party. Following completion of an economic study for which Registry Operator has provided data, ICANN will destroy all data provided by Registry Operator that has not been aggregated and made anonymous.

  • Trade and Economic Mixed Commission 1. The Parties hereby incorporate the Trade and Economic Mixed Commission (Mixed Commission) into this Agreement. 2. The Mixed Commission was established according to the Basic Agreement on Economic and Technical Cooperation between the Government of the People's Republic of China and the Government of the Republic of Peru, signed in Lima, on November 2nd, 1988. 3. The Mixed Commission is composed of officials as follows: (a) for China, the high ranking official of

Time is Money Join Law Insider Premium to draft better contracts faster.