ACCESS TO AND DEVELOPMENT OF LICENSE PARCELS Sample Clauses

ACCESS TO AND DEVELOPMENT OF LICENSE PARCELS. RESTRICTIONS ON RELOCATION OF UTILITIES. Xxxxx acknowledges that it will be necessary for Licensor to install improvements, including without limitation, utilities, in, on, over and under the License Parcels to provide for the development of the Property, including the License Parcels, as a cohesive residential development project. Therefore, Licensor shall be entitled to enter upon the License Parcels for the purpose of performing engineering activities and making physical improvements to the License Parcels, including but not limited to relocation of existing utility improvements located on the Property (including the License Parcels) subject to the terms and conditions in this License Agreement. In performing such work, Licensor acknowledges and agrees that it shall take all reasonable steps to avoid any material impact to the ongoing plant nursery operation. If it is necessary to relocate any portion of the ongoing plant nursery operation, Licensor shall perform such relocation at Licensor's sole cost and in accordance with the terms and conditions set forth below. Without limiting the foregoing, Licensor acknowledges that all loading, shipping, and deliveries to the nursery shall continue without the imposition of any restrictions thereon, and the water supply, power supply, utilities, pumping station, recycling, sewage disposal and access shall remain in continuous operation at current levels, subject to temporary interruptions. In the event that Licensor needs to cause a temporary interruption of power or water supply to the nursery operations as a result of Licensor's grading or construction activities, Licensor shall coordinate any interruption with Xxxxx, including without limitation the date, time and length of the proposed interruption. Licensor shall provide to Xxxxx a minimum of seventy-two (72) hours prior written notice of any temporary interruption. Notwithstanding the foregoing, at no time shall the nursery operations be without alternative water or power supply. Licensor acknowledges that Xxxxx' back-up water supply capacity of the nursery is approximately 3-4 hours, and that Xxxxx has no back-up power supply. Licensor shall be responsible, at its sole cost, for providing alternative water and power supply sources as may be reasonably necessary to avoid any material interruption in water or power supply, taking into consideration the Xxxxx' current back-up capacity. If Licensor's grading or construction activities on any portion of the P...
Sample 1
AutoNDA by SimpleDocs

Related to ACCESS TO AND DEVELOPMENT OF LICENSE PARCELS

  • Research and Development (i) Advice and assistance in relation to research and development of Party B;

  • Information Systems Acquisition Development and Maintenance a. Client Data – Client Data will only be used by State Street for the purposes specified in this Agreement.

  • Creation and Development Fee If the Prospectus related to a Trust specifies a creation and development fee, the Trustee shall, on or immediately after the end of the initial offering period, withdraw from the Capital Account, an amount equal to the unpaid creation and development fee as of such date and credit such amount to a special non-Trust account designated by the Depositor out of which the creation and development fee will be distributed to the Depositor (the "Creation and Development Account"). The creation and development fee is the per unit amount specified in the Prospectus for the Trust.

  • License; Use Upon delivery to an Authorized Person or a person reasonably believed by Custodian to be an Authorized Person of the Fund of software enabling the Fund to obtain access to the System (the “Software”), Custodian grants to the Fund a personal, nontransferable and nonexclusive license to use the Software solely for the purpose of transmitting Written Instructions, receiving reports, making inquiries or otherwise communicating with Custodian in connection with the Account(s). The Fund shall use the Software solely for its own internal and proper business purposes and not in the operation of a service bureau. Except as set forth herein, no license or right of any kind is granted to the Fund with respect to the Software. The Fund acknowledges that Custodian and its suppliers retain and have title and exclusive proprietary rights to the Software, including any trade secrets or other ideas, concepts, know-how, methodologies, or information incorporated therein and the exclusive rights to any copyrights, trademarks and patents (including registrations and applications for registration of either), or other statutory or legal protections available in respect thereof. The Fund further acknowledges that all or a part of the Software may be copyrighted or trademarked (or a registration or claim made therefor) by Custodian or its suppliers. The Fund shall not take any action with respect tot the Software inconsistent with the foregoing acknowledgement, nor shall the Fund attempt to decompile, reverse engineer or modify the Software. The Fund may not xxx, sell, lease or provide, directly or indirectly, any of the Software of any portion thereof to any other person or entity without Custodian’s prior written consent. The Fund may not remove any statutory copyright notice or other notice included in the Software or on any media containing the Software. The Fund shall reproduce any such notice on any reproduction of the Software and shall add any statutory copyright notice or other notice to the Software or media upon Custodian’s request.

  • Manufacturing Technology Transfer With respect to each Technology Transfer Product, upon AbbVie’s written request after the Inclusion Date for the Included Target to which such Technology Transfer Product is Directed, Morphic shall effect a full transfer to AbbVie or its designee (which designee may be an Affiliate or a Third Party manufacturer) of all Morphic Know-How and Joint Know-How relating to the then-current process for the Manufacture of such Technology Transfer Product (the “Manufacturing Process”) and to implement the Manufacturing Process at facilities designated by AbbVie (such transfer and implementation, as more fully described in this Section 5.3, the “Manufacturing Technology Transfer”). To assist with the Manufacturing Technology Transfer, Morphic will make its personnel reasonably available to AbbVie during normal business hours for up to [***] FTE hours with respect to each Included Target (in each case, free of charge to AbbVie) to transfer and implement the Manufacturing Process under this Section 5.3. Thereafter, if requested by AbbVie, Morphic shall continue to perform such obligations; provided, that AbbVie will reimburse Morphic for its full-time equivalent (FTE) costs (for clarity, in excess of [***] FTE hours) and any reasonable and verifiable out-of-pocket costs incurred in providing such assistance. CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY [***], HAS BEEN OMITTED BECAUSE IT IS NOT MATERIAL AND WOULD LIKELY CAUSE COMPETITIVE HARM TO THE COMPANY IF PUBLICLY DISCLOSED.

  • Technology Transfer Subject to the terms of the Development Supply Agreement, as soon as reasonably practicable, but in no event later than the fifth (5th) anniversary of the Effective Date, Alnylam shall initiate a technology transfer to MedCo, or to its Third Party manufacturer(s) of Licensed Product, selected by MedCo and reasonably acceptable to Alnylam, of Alnylam Know-How that is reasonably necessary or useful for the Manufacture of the Licensed Product, and shall make available its personnel on a reasonable basis to consult with MedCo or such Third Party manufacturer(s) with respect thereto, all at MedCo’s expense, including the Costs reasonably incurred by Alnylam in connection with such technology transfer activities. MedCo shall reimburse Alnylam such Costs incurred with respect to such Manufacturing technology transfer within [***] days after receipt of an invoice therefor. Alnylam and its Affiliates shall keep complete and accurate records in sufficient detail to enable the payments payable hereunder to be determined. Alnylam shall not be required to perform technology transfer to more than one Third Party manufacturer for each stage of the Licensed Product supply chain (i.e., Bulk Drug Substance, Bulk Drug Product and Finished Product). Promptly after MedCo’s written request, Alnylam shall use Commercially Reasonable Efforts to assign to MedCo any manufacturing agreement between Alnylam and a Third Party that is solely related to the manufacture of Licensed Products. Such assignment shall be subject to the terms and conditions of such agreement, including any required consents of such Third Party and MedCo’s written agreement to assume all the obligations of Alnylam under such agreement to be undertaken after such assignment, but Alnylam shall remain solely responsible for its obligations under such agreement arising prior to such assignment. Except as provided in the immediately preceding sentence, MedCo shall be solely responsible for contracting with such Third Party manufacturer (and any other Third Party manufacture to whom Alnylam has initiated technology transfer as set forth in this Section 5.3) for the supply of such Licensed Product and Alnylam shall have no obligations under such agreement between MedCo and such Third Party manufacturer. Alnylam shall use Commercially Reasonable Efforts to obtain any such consent in a form reasonably acceptable to MedCo.

  • XXXXEAS Employer is engaged in the telephone and telecommunication installation and service, and manufacture sale and installation of highway signs and traffic control products.

  • Commercialization License Subject to the terms of this Agreement, including without limitation Section 2.2 and Theravance's Co-Promotion rights in Section 5.3.2, Theravance hereby grants to GSK, and GSK accepts, an exclusive license under the Theravance Patents and Theravance Know-How to make, have made, use, sell, offer for sale and import Alliance Products in the Territory.

  • Clinical Development (a) Stellartech shall design, develop and construct a Clinical Unit for each of the Thermage Disposable Device and the Thermage Generator, and any required component or subassembly thereof and shall deliver such Clinical Units to Thermage in accordance with the Development Program; (b) Stellartech shall deliver to Thermage such other Deliverables as are contemplated by the Development Program in accordance with the Development Program; and (c) as requested by Thermage and automatically at the conclusion of the Development Program, Stellartech, so long as Thermage is not in breach of its material obligation hereunder, shall deliver in writing to Thermage any and all data and information held by or in the control of Stellartech which is necessary or useful to obtain regulatory approval of the Products in the United States or any foreign country.

  • Research Independence The Company acknowledges that each Underwriter’s research analysts and research departments, if any, are required to be independent from their respective investment banking divisions and are subject to certain regulations and internal policies, and that such Underwriter’s research analysts may hold and make statements or investment recommendations and/or publish research reports with respect to the Company and/or the offering that differ from the views of its investment bankers. The Company hereby waives and releases, to the fullest extent permitted by law, any claims that the Company may have against such Underwriter with respect to any conflict of interest that may arise from the fact that the views expressed by their independent research analysts and research departments may be different from or inconsistent with the views or advice communicated to the Company by such Underwriter’s investment banking divisions. The Company acknowledges that the Representative is a full service securities firm and as such from time to time, subject to applicable securities laws, may effect transactions for its own account or the account of its customers and hold long or short position in debt or equity securities of the Company.

Time is Money Join Law Insider Premium to draft better contracts faster.