Vertical Curve definition

Vertical Curve means an area of the roadway where the vehicle’s direction of travel changes in a vertical plane.
Vertical Curve means the surface curvature on a street centerline located between lines of different percentage of grades.
Vertical Curve means a curve, changing directions between two grades. Vertical curves are usually parabolic.

Examples of Vertical Curve in a sentence

  • Table 1109.2: Street Grade Standards Type of StreetMaximum GradeMinimum Rate of Vertical Curve (K)Minimum Radii of CurvatureMajor Arterials 1109.8 INTERSECTIONS.

  • Vertical Curve Data: PVC, PVI, PVT, length of curve, PVI Elevation.

  • Vertical Curve Design Criteria is presented in Table 3.6. All vertical curves shall be labeled, in the profile, with length of curve (L), and K.

  • Finish Grades Every 50 Feet (Including Vertical Curve Information)10.

  • Vertical Curve: The vertical curves are classified into two categories: Summit or Crest Curves and Valley or Sag Curves.

  • Vertical Curve K ValuesCriteria60 km/h50 km/h SCHEDULE 1 ROADS Table of Contents1.

  • Figure 44-3J, Vertical Curve Computations (Example 44-3.2), illustrates an example on how to use these formulas.

  • The necessary formulas for computing the unsymmetrical vertical curve are shown in Figure 44-3H, Unsymmetrical Vertical Curve Equations.

  • Vertical Curve – is a surface curvature on a street centerline between lines of different percentage of grade.

  • Figure 44-3E, Vertical Curve Definitions, presents the common terms and definitions used in vertical curve computations.

Related to Vertical Curve

  • Electrical cleaner means a product labeled to remove heavy soils such as grease, grime, or oil from electrical equipment, including, but not limited to, electric motors, armatures, relays, electric panels, or generators. Electrical Cleaner does not include “General Purpose Cleaner,” “General Purpose Degreaser,” “Dusting Aid,” “Electronic Cleaner,” “Energized Electrical Cleaner,” “Pressurized Gas Duster,” “Engine Degreaser,” “Anti-Static Product,” or products designed to clean the casings or housings of electrical equipment.

  • Critical Path means those Trade Contractor Work activities identified on the Construction Schedule which, if delayed, will cause a corresponding Delay in the Substantial Completion Date.

  • State Level Monitoring Cell means the body constituted by the State Government for the control and elimination of ragging in institutions within the jurisdiction of the State, established under a State Law or on the advice of the Central Government, as the case may be.

  • Elevation means the vertical distance of a point or a level, on or affixed to the surface of the earth, measured from mean sea level;

  • Vertical service means an ancillary service that is offered in connection with one or more telecommunications services, which offers advanced calling features that allow customers to identify callers and to manage multiple calls and call connections, including conference bridging services.

  • Connector means a flanged, screwed, welded, or other joined fitting used to connect two pipelines or a pipeline and a piece of process equipment.

  • MC means Measurement Canada, an Agency of Industry Canada.

  • Plinth means the portion of a structure between the surface of the surrounding ground and surface of the floor immediately above the ground.

  • R-point means a reference point defined for each seat by the manufacturer in relation to the vehicle's structure, as indicated in Annex 6 to Regulation No.94

  • Demarcation Point means the point where Qwest owned or controlled facilities cease, and CLEC, End User Customer, premises owner or landlord ownership or control of facilities begin. "Designed, Verified and Assigned Date" or "DVA" means the date on which implementation groups are to report that all documents and materials have been received and are complete.

  • Critical control point means a point, step, or procedure in a food proc- ess at which control can be applied, and a food safety hazard can as a result be prevented, eliminated, or reduced to acceptable levels.

  • Point / “Pip” shall mean the numerical value of the last, or right-most, digit of a Quote.

  • MiFID II means Directive 2014/65/EU of the European Parliament and of the Council of 15 May 2014 on markets in financial instruments and amending Directive 2002/92/EC and Directive 2011/61/EU;

  • Pharmaceutical care means the provision of drug therapy and

  • MUTCD means the Manual on Uniform Traffic Control Devices, as adopted in 761—Chapter 130.

  • Overall width of a vehicle means a dimension which is measured according to ISO standard 612-1978, term No. 6.2. In the case of vehicles of category other than M1, in addition to the provisions of that standard, when measuring the vehicle width the following devices shall not be taken into account:

  • Highest Credit Rating Available The highest rating category (disregarding any plus or minus or any numerical or other subcategory) of any Rating Agency. Holders: All of the Certificateholders.

  • LHIN Cluster has the meaning ascribed to it in the Accountability Agreement and is a grouping of LHINs for the purpose of advancing Digital Health initiatives through regional coordination aligned with the MOHLTC’s provincial priorities.

  • Critical group means the group of individuals reasonably expected to receive the greatest exposure to residual radioactivity for any applicable set of circumstances.

  • Interconnector means equipment used to link the electricity system of the State to electricity systems outside of the State;

  • Suction outlet means the opening or fitting through which the water under negative pressure is drawn from the pool or spa.

  • Electrical company means a company owned by investors that

  • Runway means a defined rectangular area on a land aerodrome prepared for the landing and take-off of aircraft;

  • Electrical circuit means an assembly of connected high voltage live parts which is designed to be electrically energized in normal operation.

  • Cold Weather Alert means the notice that PJM provides to PJM Members, Transmission Owners, resource owners and operators, customers, and regulators to prepare personnel and facilities for expected extreme cold weather conditions.

  • manoeuvring area means that part of an aerodrome to be used for the take-off, landing and taxiing of aircraft, excluding aprons;