re-test definition

re-test means any test subsequent to a periodic CVR test which is carried out on a vehicle in accordance with Regulation 16 on foot of the refusal of a pass statement for that vehicle at the periodic CVR test where:
Sample 1Sample 2Sample 3
re-test means the carrying out of Acceptance Tests on the second and any subsequent occasion. Schedule means a schedule annexed to the preceding term and conditions.
Sample 1Sample 2Sample 3
re-test means a subsequent test carried out on a vehicle under these Regu- lations, subsequent to the refusal of a test certificate in respect of that vehicle, where—
Sample 1Sample 2Sample 3

Examples of re-test in a sentence

  • Where a Main Meter or Check Meter has failed either a Subsequent Metering Calibration Test or a Subsequent Metering Calibration Re-Test, the Generator must promptly replace that Main Meter or Check Meter in accordance with paragraph 9 of this MOF.

  • If Customer fails to provide its Acceptance or rejection within the Acceptance Testing Period or the Re-Test Period, the Solution will be deemed accepted.

  • Section 9.1. Project Performance Tests 76 Section 9.2. Minimum Performance Test Requirements; Certain Re-Test Requirements.

  • If the Project Performance Test Results of such Optional Project Performance Re-Test show that one or more of the Minimum Performance Test Requirements were not achieved, Seller shall, at its sole expense, conduct additional Optional Project Performance Re-Tests until the Project Performance Test Results show that all of the Minimum Performance Test Requirements have been achieved.

  • To review and revise the Re-Test Program regulations from time to time as required by changing conditions.

  • Where a Main Meter or Check Meter has failed either a Subsequent Metering Calibration Test or a Subsequent Metering Calibration Re-Test, the Generator must promptly replace that Main Meter or Check Meter in accordance with paragraph 99 of this MOF.

  • Functional Performance Test Project Name BC Hydro Xxxxxxx Tower – Boiler Replacement Project Project # 20429 System Boilers and Hot Water Pumps Equipment TB-1N, TB-2N, THWP-6N, 7N, 8N, and 9N Document # FPC-1 Revision 1 Date 2019-01-03 Status For Review SAMPLE Test Results Summary Initial Test Start Date End Date Results (Check one) Explanation: 2018-08-28 2018-08-8 ☐ Pass ☐ Fail (Re-Test Required) ☒ Partial (Seasonal / Deferred Test Req’d) Initial testing of control logic.


More Definitions of re-test

re-test means to conduct a test again after the tank, line or vapor recovery system has been repaired after receiving a test result of “failed”.
Sample 1
re-test means any test subsequent to an initial or periodic CVR test which is carried out on a vehicle in accordance with Regulation 16 of the Commercial Vehicle Roadworthiness (Vehicle Testing) (No. 2) Regulations 2013 (S.I. No. 347 of 2013), as amended, on foot of the refusal of a pass statement for that vehicle at its initial or periodic CVR test where:
Sample 1
re-test means a test carried out on a vehicle, subsequent to the refusal of a pass statement in respect of that vehicle, where—
Sample 1Sample 2Sample 3

Related to re-test

  • RDDS test Means one query sent to a particular “IP address” of one of the servers of one of the RDDS services. Queries shall be about existing objects in the Registry System and the responses must contain the corresponding information otherwise the query will be considered unanswered. Queries with an RTT 5 times higher than the corresponding SLR will be considered as unanswered. The possible results to an RDDS test are: a number in milliseconds corresponding to the RTT or undefined/unanswered.

  • Fit test means the use of a protocol to qualitatively or quantitatively evaluate the fit of a respirator on an individual.

  • DNS test Means one non-­‐recursive DNS query sent to a particular “IP address” (via UDP or TCP). If DNSSEC is offered in the queried DNS zone, for a query to be considered answered, the signatures must be positively verified against a corresponding DS record published in the parent zone or, if the parent is not signed, against a statically configured Trust Anchor. The answer to the query must contain the corresponding information from the Registry System, otherwise the query will be considered unanswered. A query with a “DNS resolution RTT” 5 times higher than the corresponding SLR, will be considered unanswered. The possible results to a DNS test are: a number in milliseconds corresponding to the “DNS resolution RTT” or, undefined/unanswered.

  • EPP test Means one EPP command sent to a particular “IP address” for one of the EPP servers. Query and transform commands, with the exception of “create”, shall be about existing objects in the Registry System. The response shall include appropriate data from the Registry System. The possible results to an EPP test are: a number in milliseconds corresponding to the “EPP command RTT” or undefined/unanswered.

  • Performance Test means all operational checks and tests required to determine the performance parameters including inter-alia capacity, efficiency and operating characteristics of the Stores as specified in the Contract.

  • Coverage Test means each of the Class A/B Par Value Test, the Class A/B Interest Coverage Test, the Class C Par Value Test, the Class C Interest Coverage Test, the Class D Par Value Test, the Class D Interest Coverage Test, the Class E Par Value Test and the Class E Interest Coverage Test.

  • Acceptance Test is a test of the Features executed by the Customer to prepare the acceptance.

  • Screening Test means a drug or alcohol test which uses a method of analysis allowed by the Minnesota Drug and Alcohol Testing in the Workplace Act to be used for such purposes.

  • Drug use test means a scientifically substantiated method to test for the presence of illegal or performance-enhancing drugs or the metabolites thereof in a person’s urine.

  • Drug test means a test designed to detect the illegal use of a controlled substance.

  • Commissioning test means tests applied to the Generating Facility, after completion of the construction of the Generating Facility, in order to verify that the Generating Facility may be released for Operation.

  • COVID-19 test means a viral test for SARS-CoV-2 that is:

  • Acceptance Testing mean the tests, reviews and other activities that are performed by or on behalf of Agency to determine whether the Deliverables meet the Acceptance Criteria or otherwise satisfy the Agency, as determined by the Agency in its sole discretion.

  • Acceptance Tests means those tests performed during the Performance Period which are intended to determine compliance of Equipment and Software with the specifications and all other Attachments incorporated herein by reference and to determine the reliability of the Equipment.

  • Test means such test as is prescribed by the particulars or considered necessary by the Inspecting Officer whether performed or made by the Inspecting Officer or any agency acting under the direction of the Inspecting Officer;

  • Percolation test means a subsurface soil test at the depth of a proposed absorption system or similar component of an OWTS to determine the water absorption capability of the soil, the results of which are normally expressed as the rate at which one inch of water is absorbed. The rate is expressed in minutes per inch.

  • Plant Test Date or "PTD" means the date acceptance testing is performed with CLEC. "Point of Interface", "Point of Interconnection," or "POI" is a demarcation between the networks of two (2) LECs (including a LEC and CLEC). The POI is that point where the exchange of traffic takes place.