Protective surfacing definition

Protective surfacing means an approved material that is used beneath climbing equipment and is designed to protect a child who falls from the highest designated play surface on a piece of equipment to the protective surfacing below.
Sample 1Sample 2Sample 3
Protective surfacing means impact absorbing materials for indoor and outdoor use, under and around playground equipment. Hard surfaces such as asphalt, concrete, dirt, grass, or flooring covered by carpet or gym mats do not qualify as protective surfacing.
Sample 1
Protective surfacing. MEANS AN APPROVED MATERIAL, MEETING ASTM STANDARDS, THAT IS USED BENEATH CLIMBING EQUIPMENT AND IS DESIGNED TO PROTECT A CHILD WHO FALLS FROM THE HIGHEST DESIGNATED PLAY SURFACE ON A PIECE OF EQUIPMENT TO THE PROTECTIVE SURFACING BELOW. REFER TO SECTION 7.707.21 FOR INFORMATION ON HOW TO OBTAIN THE STANDARDS.
Sample 1

Examples of Protective surfacing in a sentence

  • Protective surfacing for roof traffic shall be Sure-Weld TPO Walkway Rolls installed per manufacturer’s requirements or concrete pavers loose laid over an approved slip sheet (pavers not recommended for slopes greater than 2” in 12”).

  • Protective surfacing should extend at least six feet in all directions around play equipment.

  • Protective surfacing must be installed according to manufacturer’s instructions, underneath and in the use zone surrounding the equipment.

  • Protective surfacing for roof traffic shall be Sure-Flex PVC Walkway Rolls installed per manufacturer’s requirements or concrete pavers loose laid over an approved slip sheet (pavers not recommended for slopes greater than 2” in 12”).

  • Among other things, the Buyer will own all and any intellectual property incurring as a consequence of the Seller creating any works, inventions, utility models, etc.

  • Protective surfacing for roof traffic shall be Sure-Seal Pressure-Sensitive Walkway Pads (with Factory-Applied Tape on the underside of the walkway) adhered to the membrane surface in conjunction with Sure-Seal Primer.

  • Protective surfacing for roof traffic shall be adhered to the EPDM membrane roof with Splice adhesive or Splice Tape.

  • Protective surfacing consists of two systems; synthetic surfacing and loose fill surfacing.

  • Protective surfacing for roof traffic shall be concrete pavers (minimum 18 pounds per square foot loose laid over a slip sheet of cured EPDM membrane or two layers of HP Protective Mat.

  • Protective surfacing for roof traffic shall be Manufacture’s TPO Walkway Rolls installed per manufacturer’s requirements.

Related to Protective surfacing

  • Massive Multiauthor Collaboration Site (or “MMC Site”) means any World Wide Web server that publishes copyrightable works and also provides prominent facilities for anybody to edit those works. A public wiki that anybody can edit is an example of such a server. A “Massive Multiauthor Collaboration” (or “MMC”) contained in the site means any set of copyrightable works thus published on the MMC site.