MOVE-IN definition

MOVE-IN. All appliances and systems in the Premises, including refrigerators, stoves, microwaves, dishwashers, washers, dryers, water heaters, furnaces, etc., will be deemed to be in working condition at the commencement of the Lease term, unless Tenant notifies Landlord, in writing, of any nonfunctioning appliances and/or systems within 24 hours of Tenant’s move in to the Premises. As of the commencement of the Lease, Tenant acknowledges that Tenant has examined the Premises and approves of the condition of the Premises, including all systems and appliances in the Premises. Taking possession of the Premises by Tenant is conclusive that the Premises are in good order and satisfactory condition.
Sample 1Sample 2
MOVE-IN. Scheduled move-in times and instructions will be sent approximately one month before the Expo. EQUIPMENT STAGING: Equipment may be staged/parked before the Expo in the lot East of Pavilion 4 of the Lancaster Event Center property starting Thursday, November 30. The Event Center must be notified for security reasons at 000.000.0000.
Sample 1Sample 2
MOVE-IN. The demised premises shall be thoroughly cleaned, at Landlord's sole cost and expense, prior to the delivery of the Premises to Tenant for construction.
Sample 1Sample 2

Examples of MOVE-IN in a sentence

  • CONDITION REPORT (MOVE-IN INSPECTION FORM) This report will be filled out by CBS Rentals and included in the Move-In Packet.

  • OPTION 2 EARLY MOVE-IN/ SELF CLEAN: Tenants agree to do the cleaning themselves, and will be paid $15/hour for said cleaning.

  • MOVE-IN: In accordance with applicable law, Lessor warrants that all habitable areas of the premises are clean, sanitary and fit for residential use and that basements and attics exclusive to the leased unit, where present, have been cleared of debris and ex-lessees’ belongings at the time of occupancy.

  • The first month rent is charged by daily rate, starting from the MOVE-IN day.

  • WHEN A LESSEE WANTS TO MOVE-IN A new Lessee, not originally signed on the Lease, may move-in to the Property under the following provisions: • Completion and submission of the XxXxxxxx Realty Management, Inc.

  • THE MOVE-IN INVENTORY IS DUE WITHIN 7 DAYS AFTER OBTAINING POSSESSION OF THE UNIT, EXCLUSIVE SPACE, UNIT COMMON AREAS AND PREMISES.

  • THIS INCLUDES BUT IS NOT LIMITED TO: LEASE CHANGES OR ADDITIONS, NOTICES TO VACATE BY EITHER TENANT OR LANDLORD, MOVE-IN SPECIALS, IMPROVEMENTS OR REMODELING, RENT REBATES, RENT REDUCTIONS ETC.

  • ACCOUNT MUST BE PAID IN FULL PRIOR TO MOVE-IN: Any leased space not occupied by 9:00am opening day will be considered forfeited unless prior written arrangements have been made with Xxxxxxxxxx Productions.

  • APPLICATION FEE: $40, per adult eCheck Payment Processing Fee (per individual payment): $1.95 PET RENT: $0.00 [Varies, starting at $30 and up, assessed monthly, for each pet in the household] MOVE-IN CHECKLIST: $25, a fee is charged only when a tenant fails to submit the checklist to Broker.

  • MOVE-IN INSPECTION & checklist items read & approved by: SIGN: COMMON AREAS: RESIDENT is hereby verifying that the premise that is co-leased by the RESIDENT is in good condition on the move in day, RESIDENT is able to utilize the COMMON AREAS of the house, appliances, fixtures & furniture in ordinary usage during the lease period & vacate the premise with condition of ordinary wear & tear only.


More Definitions of MOVE-IN

MOVE-IN means HOUZEY services relating to facilitating occupation of the Property by Resident;
Sample 1
MOVE-IN. Scheduled move-in times and instructions will be sent approximately one month before the Expo.
Sample 1

Related to MOVE-IN

  • Tailings means material rejected from a mill after most of the valuable minerals have been extracted.

  • Nitrogen oxides means nitric oxide and nitrogen dioxide, expressed as nitrogen dioxide (NO2);

  • Flocculation means a process to enhance agglomeration or collection of smaller floc particles into larger, more easily settleable particles through gentle stirring by hydraulic or mechanical means.

  • Transboundary movement means any movement of hazardous wastes or other wastes from an area under the national jurisdiction of one State to or through an area under the national jurisdiction of another State or to or through an area not under the national jurisdiction of any State, provided at least two States are involved in the movement;

  • Valve means a device used to control the flow of water in the irrigation system.

  • Touch-up coating means a coating used to cover minor coating imperfections appearing after the main coating operation.

  • Flare means a vendor-provided informational sign that, at a minimum, displays the prize structure, the serial number of the sleeve in play, the odds of winning a prize, and the price of the ticket. (3-26-08)

  • Trauma Center or "designated trauma center" means a licensed hospital, accredited by the Joint Commission on Accreditation of Healthcare Organizations, which has been designated as a Level I, II, III, or IV trauma center and/or Level I or II pediatric trauma center by the local EMS agency, in accordance with California Trauma Care System Regulations.

  • Low-solids coating means a coating containing 0.12 kilogram or less of solids per liter (one pound or less of solids per gallon) of coating material.

  • Undercoating means any aerosol product designed to impart a protective, non-paint layer to the undercarriage, trunk interior, and/or firewall of motor vehicles to prevent the formation of rust or to deaden sound. “Undercoating” includes, but is not limited to, rubberized, mastic, or asphaltic products.

  • Hydraulic fracturing means the fracturing of underground rock formations, including shale and non-shale formations, by manmade fluid-driven techniques for the purpose of stimulating oil, natural gas, or other subsurface hydrocarbon production.

  • Containers means any ISO standard container(s) with a maximum height of 9’6” including any reefer and/or other special containers, provided they meet ISO standards.

  • borehole means a hole sunk into the earth for the purpose of locating, abstracting or using subterranean water and includes a spring;

  • Coating means a material applied onto or impregnated into a substrate for protective, decorative, or functional purposes. Such materials include, but are not limited to, paints, varnishes, sealers, and stains.

  • Biomethane means biogas that meets pipeline quality natural gas standards.

  • Filtration means a process for removing particulate matter from water by passage through porous media.

  • Automotive Wax, Polish, Sealant or Glaze means a product designed to seal out moisture, increase gloss, or otherwise enhance a motor vehicle’s painted surfaces. “Automotive Wax, Polish, Sealant or Glaze” includes, but is not limited to, products designed for use in autobody repair shops and “drive-through” car washes, as well as products designed for the general public. “Automotive Wax, Polish, Sealant or Glaze” does not include “Automotive Rubbing or Polishing Compounds”, automotive wash and wax products, surfactant-containing car wash products, and products designed for use on unpainted surfaces such as bare metal, chrome, glass, or plastic.

  • ore means any rock soil or alluvium bearing diamonds mined from mining leases granted pursuant to this Agreement;

  • Oxides of nitrogen means the sum of the volume mixing ratio (ppbv) of nitrogen monoxide (nitric oxide) and nitrogen dioxide expressed in units of mass concentration of nitrogen dioxide (µg/m3);

  • PAD means a Preauthorized Debit.

  • Exfiltration means any unauthorized release of data from within an information system. This includes copying the data through covert network channels or the copying of data to unauthorized media.

  • Dry cleaning means any industrial or commercial activity using VOCs in an installation to clean garments, furnishings and similar consumer goods with the exception of the manual removal of stains and spots in the textile and clothing industry;

  • Process Gas means gas used for which altemate fuels, other than another gaseous fuel, are not technically feasible such as in applications requiring precise temperature controls and precise flame characteristics.

  • Refinery means a facility used to produce motor fuel from crude oil, unfinished oils, natural gas liquids, or other hydrocarbons and from which motor fuel may be removed by pipeline, by marine vessel, or at a rack.

  • Total tetrahydrocannabinol means the sum of the percentage by weight of tetrahydrocannabinolic acid multiplied by eight hundred seventy-seven thousandths plus the percentage of weight of tetrahydrocannabinol.

  • Roll coating means the application of a coating material to a substrate by means of hard rubber or steel rolls.