Mill Area Production Proportion definition

Mill Area Production Proportion means the proportion which the total quantity of cane delivered during the immediately preceding 3 consecutive seasons to any mill by all growers who are members of each Mill Area CGA in a season bears to the total quantity of cane delivered to the mill in that Mill Area during the immediately preceding 3 consecutive seasons by all growers who are members of all Mill Area CGAs in that Mill Area for that season, expressed as a percentage provided that, in calculating the total quantity of cane delivered:

Related to Mill Area Production Proportion

  • Development Area means that area to which a development plan is applicable.

  • Basal area means the effective surface area available to transmit the treated effluent from the filter media in a mound system into the in-situ receiving soils. The perimeter is measured at the interface of the imported fill material and in-situ soil. On sloping sites, only the area down-gradient from the up-slope edge of the distribution media may be included in this calculation.

  • Project area plan means a written plan that, after the plan's effective date, guides and controls the development within a project area.

  • Commercial Production means the operation of the Property or any portion thereof as a producing mine and the production of mineral products therefrom (excluding bulk sampling, pilot plant or test operations);

  • Geothermal fluid means water in any form at temperatures greater than 120

  • Development Well means a well drilled inside the established limits of an oil or gas reservoir, or in close proximity to the edge of the reservoir, to the depth of a stratigraphic horizon known to be productive.

  • Generation Interconnection Feasibility Study means a study conducted by the Transmission Provider (in coordination with the affected Transmission Owner(s)) in accordance with Tariff, Part IV, section 36.2.

  • Total tetrahydrocannabinol means the sum of the percentage by weight of tetrahydrocannabinolic acid multiplied by eight hundred seventy-seven thousandths plus the percentage of weight of tetrahydrocannabinol.

  • Production Burdens means any royalties (including lessor’s royalties), overriding royalties, production payments, net profit interests or other similar interests that constitute a burden on, and are measured by or are payable out of, the production of Hydrocarbons or the proceeds realized from the sale or other disposition thereof (including any amounts payable to publicly traded royalty trusts), but excluding Taxes and assessments of Governmental Entities.

  • Natural area means an area of the rural or non-urban environment which is in an unspoilt natural state or is of high scenic value, and includes, but is not limited to, national parks, game reserves, nature reserves, marine reserves, wilderness areas, areas of extensive agriculture and scenic areas;

  • Production facility means a facility in California at which gasoline or CARBOB is produced. Upon request of a producer, the executive officer may designate, as part of the producer's production facility, a physically separate bulk storage facility which (A) is owned or leased by the producer, and (B) is operated by or at the direction of the producer, and (C) is not used to store or distribute gasoline or CARBOB that is not supplied from the production facility.

  • ILUA Area means the geographical area in relation to which the Framework ILUA applies, as specified in Schedule 2 of the Framework ILUA;

  • Project Area means THE AREA WHERE WORK IS BEING PERFORMED FOR THE CITY OF SUFFOLK, VIRGINIA.

  • Uppermost aquifer means the geologic formation nearest the natural ground surface that is an aquifer, as well as lower aquifers that are hydraulically interconnected with this aquifer within the facility's property boundary.

  • Interconnection Feasibility Study means either a Generation Interconnection Feasibility Study or Transmission Interconnection Feasibility Study.

  • Disposal area means 1 or more of the following at a location as defined by the boundary identified in its construction permit or engineering plans approved by the department:

  • Production Area means that part of the animal feeding operation that includes the animal confinement area, the manure storage area, the raw materials storage area, and the waste containment areas. The animal confinement area includes, but is not limited to, open lots, housed lots, feedlots, confinement houses, stall barns, free stall barns, milkrooms, milking centers, egg washing or egg processing areas, areas used for the storage and disposal/treatment of mortalities, cowyards, barnyards, medication pens, walkers, animal walkways, and stables. The manure storage area includes, but is not limited to, lagoons, runoff ponds, storage sheds, stockpiles, under-house or pit storages, liquid impoundments, static piles, and composting piles. The raw materials storage area includes, but is not limited to, feed silos, and silage bunkers. The waste containment area includes, but is not limited to, settling basins and areas within berms and diversions which separate uncontaminated stormwater.

  • Production Facilities (7 9) means "production equipment" and specially designed software therefor integrated into installations for "development" or for one or more phases of "production".

  • Tight-fitting facepiece means a respiratory inlet covering that forms a complete seal with the face.

  • Development Site means any parcel or lot on which exists or which is intended for building development other than the following:

  • CO2 means carbon dioxide.

  • Built-Up Area and/or “Covered Area” in relation to a Flat shall mean the floor area of that Flat including the area of balconies and terraces, if any attached thereto, and also the thickness of the walls (external or internal) and the columns and pillars therein Provided That if any wall, column or pillar be common between two Flats, then one-half of the area under such wall column or pillar shall be included in the built-up area of each such Flat.

  • Clean coal technology demonstration project means a project using funds appropriated under the heading “Department of Energy—Clean Coal Technology,” up to a total amount of $2,500,000,000 for commercial demonstration of clean coal technology, or similar projects funded through appropriations for the Environmental Protection Agency. The federal contribution for a qualifying project shall be at least 20 percent of the total cost of the demonstration project.

  • Project area budget means a multiyear projection of annual or cumulative

  • Bulk gasoline plant means a gasoline storage and distribution facility with an average daily throughput of 20,000 gallons (76,000 liters) of gasoline or less on a 30-day rolling average.

  • Mining overburden returned to the mine site means any material overlying an economic mineral deposit which is removed to gain access to that deposit and is then used for reclamation of a surface mine.