Blowout prevention equipment definition

Blowout prevention equipment means a casinghead control device designed to control the flow of fluids from the well bore by closing around the drill pipe or production tubing or completely sealing the hole in the absence of drill pipe or production tubing.
Sample 1Sample 2Sample 3
Blowout prevention equipment means a device attached to the casing head that allows sealing of a Well to confine the well fluids in the well path and, for the purpose of this Decree-Law, including a diverter system;
Sample 1Sample 2Sample 3
Blowout prevention equipment means equipment that is designed to be attached to
Sample 1Sample 2Sample 3

Examples of Blowout prevention equipment in a sentence

  • Blowout prevention equipment installed on the well shall have a rated working pressure equal to, or higher than, the working pressure specified in the approved APD.

  • Blowout prevention equipment used when reasonable expectations of encountering hydrogen sulfide or sour gas formations that could potentially result in the partial pressure of the hydrogen sulfide or sour gas exceeding 0.05 psia (00034 MPa) in the gas phase at the maximum anticipated pressure, shall be suitable for use in such areas.

  • Blowout prevention equipment must meet the minimum standards outlined in Order 2.

  • Blowout prevention equipment shall contain pipe rams that enable closure on the pipe being used.

  • Blow-out prevention equipment used shall be in good working condition at all times.

  • Blowout prevention equipment shall not be used for flow control during a formation test.

  • Blowout prevention equipment may be required during plugging and abandonment operations.

  • Blow-out prevention equipment that fails the test may not be used until it is repaired and passes the test.

  • Depth limitations shall be deter- mined on an individual well basis by the supervisor.(4) Blowout prevention equipment.

  • Blow-out prevention equipment used must be in good working condition at all times.


More Definitions of Blowout prevention equipment

Blowout prevention equipment means a device attached to the casing head that allows sealing of the Well to confine the Well fluids in the Well path, and for the purpose of the Regulation includes a diverter system;
Sample 1
Blowout prevention equipment means a casinghead control device designed to control the flow of fluids from the well bore by closing around the drill pipe or
Sample 1

Related to Blowout prevention equipment

  • fall prevention equipment means equipment used to prevent persons from falling from a fall risk position, inducing personal equipment, a body harness, lanyards, lifelines or physical equipment such as guard-rails, screens, barricades, anchorages or similar equipment;

  • Transportation equipment means 1 or more of the following:

  • Interconnection equipment means a group of components or an integrated system owned and operated by the interconnection customer that connects an electric generator with a local electric power system, as that term is defined in Section 3.1.6.2 of IEEE Standard 1547, or with the electric distribution system. Interconnection equipment is all interface equipment including switchgear, protective devices, inverters or other interface devices. Interconnection equipment may be installed as part of an integrated equipment package that includes a generator or other electric source.

  • Field emission equipment means equipment which uses an x-ray tube in which electron emission from the cathode is due solely to the action of an electric field.

  • Air pollution control equipment means a mechanism, device, or contrivance used to control or prevent air pollution, that is not, aside from air pollution control laws and administrative regulations, vital to production of the normal product of the source or to its normal operation.

  • Production equipment (1 7 9) means tooling, templates, jigs, mandrels, moulds, dies, fixtures, alignment mechanisms, test equipment, other machinery and components therefor, limited to those specially designed or modified for "development" or for one or more phases of "production".

  • Airport Ground Support Equipment means vehicles and equipment used at an airport to service aircraft between flights.

  • Backflow Prevention Assembly means any mechanical assembly installed at a water service line or at a plumbing fixture to prevent a backflow contamination event, provided that the mechanical assembly is appropriate for the identified contaminant at the cross connection and is an in-line field-testable assembly.

  • Customer Equipment means hardware, software, systems, cabling and facilities provided by you and used in conjunction with the Equipment that we supply to you in order to receive the Services;

  • CONSTRUCTION EQUIPMENT means all appliances and equipment of whatsoever nature for the use in or for the execution, completion operation or maintenance of the work unless intended to form part of permanent work.

  • Backflow prevention device means a safety device used to prevent pollution or contamination of the water supply due to the reverse flow of water from the irrigation system.

  • Terminal Equipment means all telephone instruments, including pay telephone equipment, the common equipment of large and small key and PBX systems and other devices and apparatus, and associated wirings, which are intended to be connected electrically, acoustically or inductively to the telecommunication system of the telephone utility.

  • Data Processing Equipment means any equipment, computer hardware, or computer software (and the lease or licensing agreements related thereto) other than Personal Computers, owned or leased by the Failed Bank at Bank Closing, which is, was, or could have been used by the Failed Bank in connection with data processing activities.

  • Storm water or wastewater collection system means piping, pumps, conduits, and any other equipment necessary to collect and transport the flow of surface water run-off resulting from precipitation, or domestic, commercial, or industrial wastewater to and from retention areas or any areas where treatment is designated to occur. The collection of storm water and wastewater does not include treatment except where incidental to conveyance.

  • Local Access and Transport Area (LATA) Shall have the meaning set forth in 47 U.S.C. §153.

  • Ancillary equipment means any device including, but not limited to, such devices as piping, fittings, flanges, valves, and pumps, that is used to distribute, meter, or control the flow of hazardous waste from its point of generation to a storage or treatment tank(s), between hazardous waste storage and treatment tanks to a point of disposal onsite, or to a point of shipment for disposal off-site.

  • Air navigation facility means any facility, other than one owned and operated by the United States, used in, available for use in, or designed for use in aid of air navigation, including any structures, mechanisms, lights, beacons, markers, communicating systems, or other instrumentalities or devices used or useful as an aid, or constituting an advantage or convenience to the safe taking off, navigation, and landing of aircraft, or the safe and efficient operation or maintenance of an airport, and any combination of any or all of such facilities.

  • Mobile x-ray equipment means x-ray equipment mounted on a permanent base with wheels and/or casters for moving while completely assembled.

  • Supplier of water means any person who owns or operates a public water system.

  • Load Control Equipment means the equipment (which may include, but is not limited to, ripple receivers and relays) that is from time to time installed in, over or on Consumer’s Premises for the purpose of receiving signals sent by Load Signalling Equipment and switching on and off, or otherwise controlling, controllable load;

  • Analytical x-ray equipment means equipment used for x-ray diffraction or fluorescence analysis.

  • Rubbing alcohol means any product containing isopropyl alcohol (also called isopropanol) or denatured ethanol and labeled for topical use, usually to decrease germs in minor cuts and scrapes, to relieve minor muscle aches, as a rubefacient, and for massage.

  • Leak-detection system means a system capable of detecting the failure of either the primary or secondary containment structure or the presence of a release of hazardous waste or accumulated liquid in the secondary containment structure. Such a system must employ operational controls (e.g., daily visual inspections for releases into the secondary containment system of aboveground tanks) or consist of an interstitial monitoring device designed to detect continuously and automatically the failure of the primary or secondary containment structure or the presence of a release of hazardous waste into the secondary containment structure.

  • Customer Interconnection Facilities means all facilities and equipment owned and/or controlled, operated and maintained by Interconnection Customer on Interconnection Customer’s side of the Point of Interconnection identified in the appropriate appendices to the Interconnection Service Agreement and to the Interconnection Construction Service Agreement, including any modifications, additions, or upgrades made to such facilities and equipment, that are necessary to physically and electrically interconnect the Customer Facility with the Transmission System.

  • Production Environment means a logical group of virtual or physical computers comprised within the Cloud Environment to which the Customer will be provided with access and use the purchased Cloud Application(s) in production and for its generally marketed purpose.

  • Access Tandem Switch is a Switch used to connect End Office Switches to interexchange Carrier Switches. Qwest's Access Tandem Switches are also used to connect and switch traffic between and among Central Office Switches within the same LATA and may be used for the exchange of local traffic.