Backflow Prevention Assembly definition

Backflow Prevention Assembly means any mechanical assembly installed at a water service line or at a plumbing fixture to prevent a backflow contamination event, provided that the mechanical assembly is appropriate for the identified contaminant at the cross connection and is an in-line field-testable assembly.

Backflow Prevention Assembly means a mechanical device used to prevent backflow.

Backflow Prevention Assembly means a mechanical backflow preventer designed for in-line testing and repair including, but not limited to:

Examples of Backflow Prevention Assembly in a sentence

• All meter protection shall be by an approved Reduced Pressure Principle Backflow Prevention Assembly (RP) at the service connection.

• The customer may choose to have the Approved Backflow Prevention Assembly installed through any contractor acceptable to the Utility.

• If the customer does not install the appropriate Approved Backflow Prevention Assembly within thirty days of notification, the Utility may take appropriate action to correct.

• If an Approved Backflow Prevention Assembly is required, the Utility will determine the type of Approved Backflow Prevention Assembly that must be installed, and must provide the customer with a date by which the device must be installed.

• Installation of Approved Backflow Prevention Assembly at customer’s expense or as set forth in the rate section above.

More Definitions of Backflow Prevention Assembly

Backflow Prevention Assembly means an assembly for the prevention of backflow from the customer's water system to the District's water system and may include, but not be limited to, a backflow prevention device, isolation valves, test cocks, thrust restraints, a vault, connecting piping, an enclosure, and other appurtenances.

Backflow Prevention Assembly means a backflow prevention assembly such as a Pressure Vacuum Breaker Backsiphonage Prevention Assembly, Spill-Resistant Pressure Vacuum Breaker Backsiphonage Prevention Assembly, Double Check Valve Backflow Prevention Assembly, Double Check-Detector Backflow Prevention Assembly, Reduced Pressure Principle Backflow Prevention Assembly, or Reduced Pressure Principle-Detector Backflow Prevention Assembly and the attached shutoff valves on the inlet and outlet ends of the assembly, assembled as a complete unit.

Backflow Prevention Assembly. An assembly or means designed to prevent backflow. A listing of acceptable backflow prevention assemblies and degree of hazard is available in the Kentucky State Plumbing Law, Regulations and Code.

Backflow Prevention Assembly means a mechanical unit, designed to stop the reversal of flow that includes an inlet and outlet shut-off valve and test cocks to facilitate testing of the assembly. Backflow prevention assemblies include the reduced pressure principle backflow prevention assembly, the double gate-double check valve assembly, and the pressure vacuum breaker assembly.

Backflow Prevention Assembly means a BBWD approved assembly for the prevention of backflow from the customer’s water system to the BBWD’s water system and may include, but not be limited to, a backflow prevention device, isolation valves, test cocks, thrust restraints, a vault, connecting piping, enclosure, and other appurtenances.

Backflow Prevention Assembly means an assembly of a type and manufacture approved by the District which will prevent backflow into District’s distribution system. The District will approve all backflow prevention assemblies that meet the American Water Works Association standards at the time the backflow prevention assembly is installed.

Backflow Prevention Assembly or “assembly” means a device or means designed to prevent backflow and includes: