Basic Analog Switching Functionality definition

Basic Analog Switching Functionality refers to the functionality provided with a Local Wholesale Complete Access Line (LWCAL) by a circuit-switched, line-side, analog or TDM switch connection available in a Loop Start Signaling configuration (as defined herein, i.e., loop start at the customer’s premises but not necessarily at the AT&T-13STATE central office) used primarily for switched voice and voice-band data communications, subject to the Agreement’s Technology Evolution provisions. Expressly excluded from the scope and definition of Basic Analog Switching Functionality are Centrex, Centrex-like (and any similar), PBX, payphone (coin), and I/O features/functions/ capabilities, as well as trunk ports and DS-1 (and higher capacity) ports used other than as a multiplexing of Basic Analog Loops.
Sample 1Sample 2Sample 3

Examples of Basic Analog Switching Functionality in a sentence

  • Expressly excluded from the scope and definition of Basic Analog Switching Functionality are Centrex, Centrex-like (and any similar), PBX, payphone (coin), and I/O features/functions/ capabilities, as well as trunk ports and DS-1 (and higher capacity) ports used other than as a multiplexing of Basic Analog Loops.

  • Use of Basic Analog Switching Functionality and non-dedicated transport under the Agreement and this Appendix is only available as part of and use in conjunction with LWC.

  • LWC Access Line” (“LWCAL”) refers to an individual technology package offered by AT&T-22STATE which includes a Basic Analog Transmission Facility connected with Basic Analog Switching Functionality, equipped so that CARRIER can provide local exchange dialtone service to a particular LWC End User premises, and is otherwise operational in accordance with the provisions of this Agreement.

  • FQHCs receive discretionary appropriations under the Continuing Appropriations Act, 2016 (P.L. 114-53) and mandatory funds through the Medicare Access and CHIP Reauthorization Act of 2015 (P.L. 114-10); see CRS Report R43962, The Medicare Access and CHIP Reauthorization Act of 2015 (MACRA; P.L. 114-10), coordinated by (name redacted) and Kirstin B.

  • Use of those vertical features, CLASS features, line class codes that are being used, as of the effective date of this Attachment, by CARRIER to provide mandatory calling scope plans on a retail basis, and other features, functions, and capabilities Loaded and Activated from the switch-vendor- provided generic software of the Serving Switch for use with Basic Analog Switching Functionality.

  • Both the Basic Analog Switching Functionality and Basic Analog Transmission Facility are integral and mandatory parts of LWC, and must be provisioned for each LWC; otherwise, LWC is not available to CARRIER.

  • With respect to the calculation of “minutes of use” (“MOUs”) per LWCAL per end office per billing cycle and the application of the usage rate(s), they shall be made for each end office that provided the Basic Analog Switching Functionality used to provide CARRIER with any LWCAL during the billing cycle.

  • The Phase II implementation shall not negatively affect the availability of any Basic Analog Switching Functionality feature, line class code, function or capability that was Loaded andActivated prior to that implementation, and which were previously available to CARRIER under this Attachment.

  • The LWC product refers to an offering which has dial tone capabilities using Basic Analog Switching Functionality (as defined herein) connected to a Basic Analog Transmission Facility (as defined herein), in conjunction with other network capabilities, provided by SBC-13STATE.

  • Version: 4Q08 – Commercial Agreement - LWC 11/05/08 ATTACHMENT 08 - BASIC ANALOG SWITCHING FUNCTIONALITY AND NON-DEDICATED TRANSPORT Attachment 08 – Basic Analog Switching Functionality and Non-Dedicated Transport/AT&T-22STATE SouthEast Telephone, Inc.

Related to Basic Analog Switching Functionality

  • quality (functionality means the totality of features and characteristics of a product or service that bear on its ability to satisfy stated or implied needs F.1.4 Communication and employer’s agentEach communication between the employer and a tenderer shall be to or from the employer's agent only, and in a form that can be read, copied and recorded. Writing shall be in the English language. The employer shall not take any responsibility for non-receipt of communications from or by a tenderer. The name and contact details of the employer’s agent are stated in the tender data. F.1.5 The employer’s right to accept or reject any tender offer F.1.5.1 The employer may accept or reject any variation, deviation, tender offer, or alternative tender offer, and may cancel the tender process and reject all tender offers at any time before the formation of a contract. The employer shall not accept or incur any liability to a tenderer for such cancellation and rejection, but will give written reasons for such action upon written request to do so. F.1.5.2 The employer may not subsequent to the cancellation or abandonment of a tender process or the rejection of all responsive tender offers re-issue a tender covering substantially the same scope of work within a period of six months unless only one tender was received and such tender was returned unopened to the tenderer. F.2 Tenderer’s obligations F.2.1 EligibilitySubmit a tender offer only if the tenderer satisfies the criteria stated in the tender data and the tenderer, or any of his principals, is not under any restriction to do business with employer. F.2.2 Cost of tenderingAccept that the employer will not compensate the tenderer for any costs incurred in the preparation and submission of a tender offer, including the costs of any testing necessary to demonstrate that aspects of the offer satisfy requirements. F.2.3 Check documentsCheck the tender documents on receipt for completeness and notify the employer of any discrepancy or omission. F.2.4 Confidentiality and copyright of documentsTreat as confidential all matters arising in connection with the tender. Use and copy the documents issued by the employer only for the purpose of preparing and submitting a tender offer in response to the invitation. F.2.5 Reference documentsObtain, as necessary for submitting a tender offer, copies of the latest versions of standards, specifications, conditions of contract and other publications, which are not attached but which are incorporated into the tender documents by reference. F.2.6 Acknowledge addendaAcknowledge receipt of addenda to the tender documents, which the employer may issue, and if necessary apply for an extension to the closing time stated in the tender data, in order to take the addenda into account. F.2.7 Clarification meetingAttend, where required, a clarification meeting at which tenderers may familiarize themselves with aspects of the proposed work, services or supply and raise questions. Details of the meeting(s) are stated in the tender data. F.2.8 Seek clarificationRequest clarification of the tender documents, if necessary, by notifying the employer at least five working days before the closing time stated in the tender data. F.2.9 InsuranceBe aware that the extent of insurance to be provided by the employer (if any) might not be for the full cover required in terms of the conditions of contract identified in the contract data. The tenderer is advised to seek qualified advice regarding insurance. F.2.10 Pricing the tender offer F.2.10.1 Include in the rates, prices, and the tendered total of the prices (if any) all duties, taxes (except Value Added Tax (VAT), and other levies payable by the successful tenderer, such duties, taxes and levies being those applicable 14 days before the closing time stated in the tender data. F2.10.2 Show VAT payable by the employer separately as an addition to the tendered total of the prices.

  • Safety-sensitive function means all time from the time a driver begins to work or is required to be in readiness to work until the time he/she is relieved from work and all responsibility for performing work.

  • Essential job functions means the fundamental job duties of the employment position an individual holds. A job function may be considered essential if-

  • Essential functions means the fundamental job duties of the employment position the individual with a disability holds or desires. "Essential functions" does not include the marginal functions of the position.

  • Service Switching Point (SSP means the telephone Central Office Switch equipped with a Signaling System 7 (SS7) interface.

  • School function means any school-sponsored extra-curricular event or activity.

  • Service Switching Point (SSP) is a telephone central office switch equipped with a Signaling System 7 (SS7) interface.

  • Custom Local Area Signaling Service Features (CLASS Features) means certain Common Channel Signaling based features available to End Users, including: Automatic Call Back; Call Trace; Distinctive Ringing/Call Waiting; Selective Call Forward; and Selective Call Rejection.

  • Servicing Function Participant Any Additional Servicer, Sub-Servicer, Subcontractor or any other Person, other than the Certificate Administrator, the Operating Advisor, the Master Servicer, the Special Servicer and the Trustee, that is performing activities that address the Servicing Criteria, unless such Person’s activities relate only to 5% or less of the Mortgage Loans by unpaid principal balance calculated in accordance with the provisions of Regulation AB.

  • Radio frequency identification (RFID means an automatic identification and data capture technology comprising one or more reader/interrogators and one or more radio frequency transponders in which data transfer is achieved by means of suitably modulated inductive or radiating electromagnetic carriers.

  • Hosted Services means the hosting, management and operation of the computing hardware, ancillary equipment, Software, firmware, data, other services (including support services), and related resources for remote electronic access and use by the State and its Authorized Users, including any services and facilities related to disaster recovery obligations.

  • Hosting Services means the provision, administration, and maintenance of servers and related equipment, the provision of bandwidth at the hosting facility, and the operation of the Application for access by Customer Users to be provided by the relevant hosting service provider.

  • Basic generation service provider or "provider" means a

  • critical functions means activities, services or operations the discontinuance of which is likely in one or more Member States, to lead to the disruption of services that are essential to the real economy or to disrupt financial stability due to the size, market share, external and internal interconnectedness, complexity or cross-border activities of an institution or group, with particular regard to the substitutability of those activities, services or operations;

  • Basic generation service or "BGS" means electric generation

  • Cabinet x-ray system means an x-ray system with the x-ray tube installed in an enclosure independent of existing architectural structures except the floor on which it may be placed. The cabinet x-ray system is intended to contain at least that portion of a material being irradiated, provide radiation attenuation, and exclude personnel from its interior during generation of radiation. Included are all x-ray systems designed primarily for the inspection of carry-on baggage at airline, railroad, and bus terminals, and in similar facilities. An x-ray tube used within a shielded part of a building, or x-ray equipment that may temporarily or occasionally incorporate portable shielding, is not considered a cabinet x-ray system.

  • Online Service means our on-line system for managing the electronic transmission of information between us and Providers;

  • Eligible customer-generator means a customer-generator whose net energy metering system for renewable resources, cogeneration, fuel cells, and microturbines meets all applicable safety and performance standards.

  • Filtering facepiece (dust mask) means a negative pressure particulate respirator with a filter as an integral part of the facepiece or with the entire facepiece composed of the filtering medium, not equipped with elastomeric sealing surfaces and adjustable straps.

  • Online Services means Microsoft-hosted services to which Customer subscribes under this Agreement. It does not include software and services provided under separate license terms.

  • Signaling System 7 (SS7) means a signaling protocol used by the CCS Network.

  • Service Software means any and all software applications and any third-party or other software, and all new versions, updates, revisions, improvements and modifications of the foregoing, that Contractor provides remote access to and use of as part of the Services.

  • Form, fit, and function data means technical data that describes the required overall physical, functional, and performance characteristics (along with the qualification requirements, if applicable) of an item, component, or process to the extent necessary to permit identification of physically and functionally interchangeable items.

  • Signaling System 7 (SS7 means a signaling protocol used by the CCS Network.

  • Passenger Services means the Franchisee's railway passenger services as specified in any Timetable and/or Plan of the Day including those railway passenger services which the Franchisee may delegate or subcontract or otherwise secure through any other person from time to time in accordance with the Franchise Agreement;

  • Self-service display means the open display or storage of Tobacco Products or Tobacco Paraphernalia in a manner that is physically accessible in any way to the general public without the assistance of the retailer or employee of the retailer and a direct person-to-person transfer between the purchaser and the retailer or employee of the retailer. A vending machine is a form of Self-Service Display.