Supplies of each Product by Alvotech to ADVANZ Sample Clauses

Supplies of each Product by Alvotech to ADVANZ under this Agreement shall also be subject to the terms and conditions of a Technical Agreement in a form to be provided by Alvotech and then agreed by all parties to the same. The parties will finalise and enter into a Technical Agreement at least [***] before the first delivery of the first Product is due to be made. Following signature of each Product Schedule, the Product concerned shall be added so that it falls within the scope of the Technical Agreement. In the event of any inconsistencies between this Agreement and any Technical Agreement, a Technical Agreement will control to the extent the conflict or inconsistency relates to a matter involving the quality of the relevant Product, otherwise the provisions of this Agreement shall prevail.
AutoNDA by SimpleDocs

Related to Supplies of each Product by Alvotech to ADVANZ

  • AUDIT OF LICENSED PRODUCT USAGE Contractor shall have the right to periodically audit, no more than annually, at Contractor’s expense, use of licensed Product at any site where a copy of the Product resides provided that: (i) Contractor gives Licensee(s) at least thirty (30) days advance written notice, (ii) such audit is conducted during such party’s normal business hours, (iii) the audit is conducted by an independent auditor chosen on mutual agreement of the parties. Contractor shall recommend a minimum of three (3) auditing/accounting firms from which the Licensee will select one (1). In no case shall the Business Software Alliance (BSA), Software Publishers Association (SPA), Software and Industry Information Association (SIIA) or Federation Against Software Theft (FAST) be used directly or indirectly to conduct audits, or be recommended by Contractor; (iv) Contractor and Licensee are each entitled to designate a representative who shall be entitled to participate, and who shall mutually agree on audit format, and simultaneously review all information obtained by the audit. Such representatives also shall be entitled to copies of all reports, data or information obtained from the audit; and (v) if the audit shows that such party is not in compliance, Licensee shall be required to purchase additional licenses or capacities necessary to bring it into compliance and shall pay for the unlicensed capacity at the NYS Net Price in effect at time of audit, or if none, then at the Contractor’s U.S. Commercial list price. Once such additional licenses or capacities are purchased, Licensee shall be deemed to have been in compliance retroactively, and Licensee shall have no further liability of any kind for the unauthorized use of the software.

  • All new supplies equipment and services shall include manufacturer's minimum standard warranty unless otherwise agreed to in writing. Vendor shall be legally permitted to sell all products offered for sale to TIPS Members. All goods proposed and sold shall be new unless clearly stated in writing. Customer Support The Vendor shall provide timely and accurate customer support for orders to TIPS Members as agreed by the Parties. Vendors shall respond to such requests within a commercially reasonable time after receipt of the request. If support andƒor training is a line item sold or packaged with a sale, support shall be as agreed with the TIPS Member. Agreements Agreements for purchase will normally be put into effect by means of a purchase order(s) executed by authorized agents of the TIPS Member participating government entities, but other means of placing an order may be used at the Member’s discretion. Tax exempt status Most TIPS Members are tax exempt and the related laws andƒor regulations of the controlling jurisdiction(s) of the TIPS Member shall apply. Assignments of Agreements No assignment of Agreement may be made without the prior notification of TIPS. Written approval of TIPS shall not be unreasonably withheld. Payment for delivered goods and services can only be made to the awarded Vendor, Vendor designated reseller or vendor assigned company.

  • How to Obtain Warranty Service The Warranty Holder must inspect the Flooring for Manufacturing Defects caused by improper milling, grading, staining and coating, and report any such defects to Cali Bamboo, prior to installation of the Flooring. To obtain warranty service, the Warranty Holder must contact Cali Bamboo’s Customer Experience Department: xxxxxxxxxxxxxxx@xxxxxxxxxx.xxx/ 000-000-0000. Warranty claims must be received within 30 calendar days after the Warranty Holder identifies the Manufacturing Defect or other basis for a warranty claim. To be covered under this Cali Bamboo limited warranty, the Warranty Holder must provide documentation of sales order and proof that the Flooring was properly installed in accordance with the Installation Guide (defined below). Cali Bamboo reserves the right to retain a certified and independent flooring inspector to verify the Warranty Holder’s warranty claims. The determination of the flooring inspector regarding the warranty claim is not binding on either Cali Bamboo or on the Warranty Holder. A determination that does not verify the warranty claim shall not affect the Warranty Holder’s right to submit its claim to arbitration in accordance with the terms of the Arbitration Agreement (as defined in Cali Bamboo’s Terms and Conditions of Purchase). The performance of the inspection, however, if requested by Xxxx Xxxxxx and assuming that Xxxx Xxxxxx advances the full cost of the inspection as described above, is a requirement for the Warranty Holder to submit a warranty claim to arbitration under the Arbitration Agreement. For specific instructions on how to obtain warranty service for defective Flooring, visit the Cali Bamboo website xxxxx://xxx.xxxxxxxxxx.xxx/geowood-flooring-warranty/. Warranty Exclusions and Limitations: This limited warranty covers Flooring that is both (i) installed with strict adherence to Cali Bamboo’s GeoWood flooring installation guide found online at xxxxx://xxx.xxxxxxxxxx.xxx/flooring-installation/ (the “Installation Guide”) and (ii) maintained in accordance with Cali Bamboo’s GeoWood flooring care and maintenance guidelines found online at xxxxx://xxx.xxxxxxxxxx.xxx/floor-care-and-maintenance/ (the “Maintenance Guide”). Cali Bamboo will provide copies of these guides upon request by the Warranty Holder. This limited warranty only applies when the Flooring is used under normal traffic and other usage conditions. The limited warranty for Manufacturing Defects does not apply after the Warranty Holder has installed the Flooring, and product variation or error that does not exceed the 5% industry standard is not considered a Manufacturing Defect for purposes of this limited warranty. This limited warranty does not extend to or cover:

  • No Warranty Regarding Goods or Services as Applicable We are not responsible for the quality, safety, legality, or any other aspect of any goods or services you purchase with the Card. Arbitration Any claim, dispute, or controversy (“Claim”) arising out of or relating in any way to: i) this Agreement; ii) the Card; iii) your acquisition of the Card; iv) your use of the Card; v) the amount of available funds in the Card Account; vi) advertisements, promotions or oral or written statements related to the Card, as well as goods or services purchased with the Card; vii) the benefits and services related to the Card; or viii) transactions on the Card, no matter how described, pleaded or styled, shall be FINALLY and EXCLUSIVELY resolved by binding individual arbitration conducted by the American Arbitration Association (“AAA”) under its Consumer Arbitration Rules. This arbitration agreement is made pursuant to a transaction involving interstate commerce, and shall be governed by the Federal Arbitration Act (9 U.S.C. 1-16). We will pay the initial filing fee to commence arbitration and any arbitration hearing that you attend shall take place in the federal judicial district of your residence. ARBITRATION OF YOUR CLAIM IS MANDATORY AND BINDING. NEITHER PARTY WILL HAVE THE RIGHT TO LITIGATE THAT CLAIM THROUGH A COURT. IN ARBITRATION, NEITHER PARTY WILL HAVE THE RIGHT TO A JURY TRIAL OR TO ENGAGE IN DISCOVERY, EXCEPT AS PROVIDED FOR IN THE AAA CODE OF PROCEDURE. For a copy of the procedures, to file a Claim or for other information about this organization, contact it at: AAA, 000 Xxxxxxx Xxxxxx, Xxx Xxxx, XX 00000, or at xxx.xxx.xxx. All determinations as to the scope, interpretation, enforceability and validity of this Agreement shall be made final exclusively by the arbitrator, which award shall be binding and final. Judgment on the arbitration award may be entered in any court having jurisdiction. NO CLASS ACTION, OR OTHER REPRESENTATIVE ACTION OR PRIVATE ATTORNEY GENERAL ACTION OR JOINDER OR CONSOLIDATION OF ANY CLAIM WITH A CLAIM OF ANOTHER PERSON OR CLASS OF CLAIMANTS SHALL BE ALLOWABLE. This arbitration provision shall survive: i) the termination of the Agreement; ii) the bankruptcy of any party; iii) any transfer, sale or assignment of the Card, or any amounts owed on the Card, to any other person or entity; or iv) expiration of the Card. If any portion of this arbitration provision is deemed invalid or unenforceable, the remaining portions shall remain in force. IF YOU DO NOT AGREE TO THE TERMS OF THIS ARBITRATION AGREEMENT, DO NOT ACTIVATE OR USE THE CARD. CALL 0-000-000-0000 TO CANCEL THE CARD AND MAKE ALTERNATE ARRANGEMENTS TO RECEIVE THE FUNDS ASSOCIATED WITH THE CARD ACCOUNT.

  • DISTRIBUTION OF CONTRACTOR PRICE LIST AND CONTRACT APPENDICES Contractor shall provide Authorized Users with electronic copies of the Contract, including price lists and Appendices, upon request. OGS CENTRALIZED CONTRACT MODIFICATIONS Contract Updates will be handled as provided in Appendix C – Contract Modification Procedures.

  • Liability towards each other 5.1 No warranties In respect of any information or materials (incl. Results and Background) supplied by one Party to another under the Project, no warranty or representation of any kind is made, given or implied as to the sufficiency or fitness for purpose nor as to the absence of any infringement of any proprietary rights of third parties.

  • Manufacturer’s Warranty The Goods include the manufacturer’s standard limited parts warranty to replace defective parts covered under such warranty exclusive of labor. Labor is warranted by the Elevator Contractor for 90 days following installation. The manufacturer’s parts warranty may require that the Goods be maintained throughout the warranty period by an authorized manufacturer’s representative under a separate maintenance contract. Any warranty is conditioned on written notice to the Elevator Contractor within warranty period and contingent upon receipt of final payment to Elevator Contractor.

  • QUANTITY BASIS OF CONTRACT – NO GUARANTEED QUANTITIES The contract established has no guarantee of any specific quantity and the State is obligated only to buy that quantity which is needed by its agencies.

  • Payment of Sales, Use or Similar Taxes All sales, use, transfer, intangible, recordation, documentary stamp or similar Taxes or charges, of any nature whatsoever, applicable to, or resulting from, the transactions contemplated by this Agreement shall be borne by the Sellers.

  • ACCOUNTS SUBJECT TO ERISA The ERISA Rider is applicable to all Customers Under Section II of this Schedule A. T. Rowe Price Trust Company, as Trustee for the Johnson Matthey Salaried Employee Savings Plan Common Trust Funds T. Rowe Price Trust Company, as Trustee for the International Common Trust Fund on behalf of the Underlying Trusts: Emerging Markets Equity Trust Global Proxy Service Rider Foreign Discovery Trust Global Proxy Service Rider Foreign Discovery Trust - B Global Proxy Service Rider India Trust Global Proxy Service Rider International Small-Cap Trust Global Proxy Service Rider Japan Discovery Trust Global Proxy Service Rider Taiwan Trust Global Proxy Service Rider AMENDMENT AGREEMENT The Global Custody Agreement of January 3, 1994, as amended April 18, 1994, August 15, 1994, November 28, 1994, May 31, 1995, November 1, 1995, July 31, 1996, July 23, 1997, September 3, 1997, October 29, 1997, December 15, 1998, October 6, 1999, February 9, 2000, April 19, 2000, July 18, 2000, October 25, 2000 and July 24, 2001 (the “Custody Agreement”) by and between each of the Entities listed in Schedule A, as amended thereto, severally and not jointly (each such entity referred to hereinafter as the “Customer”) and JPMorgan Chase Bank, whose contracts have been assumed by JPMORGAN CHASE BANK (the “Bank”) is hereby further amended, as of April 24, 2002 (the “Amendment Agreement”). Terms defined in the Custody Agreement are used herein as therein defined.

Time is Money Join Law Insider Premium to draft better contracts faster.