Protecting Yourself: Security and Safety Device Disclaimer Sample Clauses

Protecting Yourself: Security and Safety Device Disclaimer. We have no duty to furnish alarms, security guards, or other security devices, except as required by law. If we furnish any security devices, we have no obligation to inspect, test, or repair these devices unless you request us to do so in writing. You must inspect security devices upon move-in and will be given the opportunity to make comments on their condition on the Unit Inspection Checklist. Any security devices you install must comply with all applicable laws. You are responsible for any damages caused by installation or malfunctioning of any additional security devices. You are also responsible for the removal of the system at the end of the lease. It is important to realize that security devices are susceptible to error and malfunction. Using common sense and being aware of your surroundings is the best way to avoid danger and harm in the case of an emergency. ▪ Preventative and Safety Measures: - Lock your doors and windows even if you are inside. - Before answering the door, use the peephole or a window to check who it is before answering. If you do not know the person, talk to them through the door before opening it. - Do not give out copies of your keys, which is strictly prohibited, or combinations to any locks on the community. If you lose your keys, contact management immediately so we can have your doors re-keyed. A fee will be assessed. - Do not hide a key or combination code under the doormat or on your patio or balcony. - Do not put your address on your key ring. - Keep valuables out of clear sight. Ensure your blinds are drawn and that others cannot see inside your unit. - Check your smoke detector and any carbon monoxide detectors monthly for dead batteries or malfunctions. - Periodically ensure your door and window locks are working properly. Notify management if you discover they are malfunctioning. Also, report if common area light fixtures are not working property. - Do not walk alone at night. - Immediately report any suspicious people or activity to management. - If you are suspicious that your unit has been illegally broken into, call 911 and do not enter.
Sample 1
AutoNDA by SimpleDocs

Related to Protecting Yourself: Security and Safety Device Disclaimer

  • System Security and Data Safeguards When SAP is given access to Licensee’s systems and data, SAP shall comply with Licensee’s reasonable administrative, technical, and physical safeguards to protect such data and guard against unauthorized access. In connection with such access, Licensee shall be responsible for providing Consultants with user authorizations and passwords to access its systems and revoking such authorizations and terminating such access, as Licensee deems appropriate from time to time. Licensee shall not grant SAP access to Licensee systems or personal information (of Licensee or any third party) unless such access is essential for the performance of Services under the Agreement. The parties agree that no breach of this provision shall be deemed to have occurred in the event of SAP non-conformance with the aforementioned safeguard but where no personal information has been compromised.

  • Confidentiality and Data Protection 12.1 Buyer undertakes that it shall not at any time disclose to any person any confidential information concerning (i) the business, affairs, customers, clients or suppliers of Seller or any of its affiliates and (ii) the operations, processes, product information, recipes and formulae, know-how, designs, trade secrets of Seller or any of its affiliates, except as permitted by Condition 12.2 (“Confidential Information”).

  • Security and Safety A. The Contractor warrants it is and shall remain in compliance with all applicable local, state and federal laws, regulations, codes and ordinances relating to fire, construction, building, health, food service and safety, including but not limited to the Hotel and Motel Fire Safety Act of 1990, Public Law 101-391. The Judicial Council may terminate this Agreement, pursuant to the termination for cause provision set forth herein, without penalty or prejudice if the Contractor fails to comply with the foregoing requirements.

  • Confidentiality and Safeguarding of University Records; Press Releases; Public Information Under this Agreement, Contractor may (1) create, (2) receive from or on behalf of University, or (3) have access to, records or record systems (collectively, University Records). Among other things, University Records may contain social security numbers, credit card numbers, or data protected or made confidential or sensitive by Applicable Laws. [Option (Include if University Records are subject to FERPA.): Additional mandatory confidentiality and security compliance requirements with respect to University Records subject to the Family Educational Rights and Privacy Act, 20 United States Code (USC) §1232g (FERPA) are addressed in Section 12.41.] [Option (Include if University is a HIPAA Covered Entity and University Records are subject to HIPAA.): Additional mandatory confidentiality and security compliance requirements with respect to University Records subject to the Health Insurance Portability and Accountability Act and 45 Code of Federal Regulations (CFR) Part 160 and subparts A and E of Part 164 (collectively, HIPAA) are addressed in Section 12.26.] Contractor represents, warrants, and agrees that it will: (1) hold University Records in strict confidence and will not use or disclose University Records except as (a) permitted or required by this Agreement, (b) required by Applicable Laws, or (c) otherwise authorized by University in writing; (2) safeguard University Records according to reasonable administrative, physical and technical standards (such as standards established by the National Institute of Standards and Technology and the Center for Internet Security [Option (Include if Section 12.39 related to Payment Card Industry Data Security Standards is not include in this Agreement.):, as well as the Payment Card Industry Data Security Standards]) that are no less rigorous than the standards by which Contractor protects its own confidential information; (3) continually monitor its operations and take any action necessary to assure that University Records are safeguarded and the confidentiality of University Records is maintained in accordance with all Applicable Laws and the terms of this Agreement; and (4) comply with University Rules regarding access to and use of University’s computer systems, including UTS165 at xxxx://xxx.xxxxxxxx.xxx/board-of-regents/policy-library/policies/uts165-information-resources-use-and-security-policy. At the request of University, Contractor agrees to provide University with a written summary of the procedures Contractor uses to safeguard and maintain the confidentiality of University Records.

  • Security and Data Privacy Each party will comply with applicable data privacy laws governing the protection of personal data in relation to their respective obligations under this Agreement. Where Siemens acts as Customer’s processor of personal data provided by Customer, the Data Privacy Terms available at xxxxx://xxx.xxxxxxx.xxx/dpt/sw, including the technical and organizational measures described therein, apply to the use of the relevant Learning Services and are incorporated herein by reference.

  • COMPLIANCE WITH NEW YORK STATE INFORMATION SECURITY BREACH AND NOTIFICATION ACT Contractor shall comply with the provisions of the New York State Information Security Breach and Notification Act (General Business Law Section 899-aa; State Technology Law Section 208).

  • COMPLIANCE WITH BREACH NOTIFICATION AND DATA SECURITY LAWS Contractor shall comply with the provisions of the New York State Information Security Breach and Notification Act (General Business Law § 899-aa and State Technology Law § 208) and commencing March 21, 2020 shall also comply with General Business Law § 899-bb.

  • Certification Regarding Lobbying Applicable to Grants Subgrants, Cooperative Agreements, and Contracts Exceeding $100,000 in Federal Funds Submission of this certification is a prerequisite for making or entering into this transaction and is imposed by section 1352, Title 31, U.S. Code. This certification is a material representation of fact upon which reliance was placed when this transaction was made or entered into. Any person who fails to file the required certification shall be subject to a civil penalty of not less than $10,000 and not more than $100,000 for each such failure. The undersigned certifies, to the best of his or her knowledge and belief, that: (1) No Federal appropriated funds have been paid or will be paid by or on behalf of the undersigned, to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of congress, or an employee of a Member of Congress in connection with the awarding of a Federal contract, the making of a Federal grant, the making of a Federal loan, the entering into a cooperative agreement, and the extension, continuation, renewal, amendment, or modification of a Federal contract, grant, loan, or cooperative agreement. (2) If any funds other than Federal appropriated funds have been paid or will be paid to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of congress, or an employee of a Member of Congress in connection with this Federal grant or cooperative agreement, the undersigned shall complete and submit Standard Form-LLL, “disclosure Form to Report Lobbying,” in accordance with its instructions. (3) The undersigned shall require that the language of this certification be included in the award documents for all covered subawards exceeding $100,000 in Federal funds at all appropriate tiers and that all subrecipients shall certify and disclose accordingly. I HAVE NOT Lobbied per above If you answered "I HAVE lobbied" to the above Attribute Question If you answered "I HAVE lobbied" to the above Attribute question, you must download the Lobbying Report "Standard From LLL, disclosure Form to Report Lobbying" which includes instruction on completing the form, complete and submit it in the Response Attachments section as a report of the lobbying activities you performed or paid others to perform. Subcontracting with Small and Minority Businesses, Women's Business Enterprises, and Labor Surplus Area Firms. Do you ever anticipate the possibility of subcontracting any of your work under this award if you are successful? IF NO, DO NOT ANSWER THE NEXT ATTRIBUTE QUESTION. . IF YES, and ONLY IF YES, you must answer the next question YES if you want a TIPS Member to be authorized to spend Federal Grant Funds for Procurement. NO

  • Handling Sensitive Personal Information and Breach Notification A. As part of its contract with HHSC Contractor may receive or create sensitive personal information, as section 521.002 of the Business and Commerce Code defines that phrase. Contractor must use appropriate safeguards to protect this sensitive personal information. These safeguards must include maintaining the sensitive personal information in a form that is unusable, unreadable, or indecipherable to unauthorized persons. Contractor may consult the “Guidance to Render Unsecured Protected Health Information Unusable, Unreadable, or Indecipherable to Unauthorized Individuals” issued by the U.S. Department of Health and Human Services to determine ways to meet this standard.

  • Provisions for Covered Entity to Inform Business Associate of Privacy Practices and Restrictions (a) Covered Entity shall notify Business Associate of any limitation(s) in the notice of privacy practices of Covered Entity under 45 CFR 164.520, to the extent that such limitation may affect Business Associate’s use or disclosure of protected health information.

Time is Money Join Law Insider Premium to draft better contracts faster.