Municipal Solid Waste Inspection Area Sample Clauses

Municipal Solid Waste Inspection Area. The Concessionaire shall, for the purpose of inspection of Municipal Solid Waste by the IAA cum PMC, provide a separate area (“Municipal Solid Waste Inspection Area”) in each of the Waste Processing Facilities, which shall meet the minimum technical specifications set out in Table below. Parameter Specifications Platform Open platform constructed using non-suspended reinforced cement concrete slabs Minimum area: 50 sqm Construction Levelling of the ground shall be done with approved earth having permeability coefficient (to leachate) and measured in field not greater than 1.0 x 10-7 cm/sec and subsequently compacted at 90% modified Xxxxxxx Density 50 mm thick PCC to be provided 150 mm thick RCC flooring on top of the PCC. 2% slope shall be provided for platform Lined drains shall be provided for collection of leachate and surface run- off
AutoNDA by SimpleDocs

Related to Municipal Solid Waste Inspection Area

  • DISCOVERY OF HAZARDOUS MATERIALS If, during the performance of the Work, Contractor or Contractor’s subcontractor(s) encounter material believed to be asbestos, polychlorinated biphenyl (PCB), or any other identified or non-identified potentially hazardous material (which has not been rendered harmless and labeled as such), Contractor and Contractor’s subcontractor(s) shall immediately stop work in the area affected and report the condition, in writing, to District. The Work in the affected area shall not continue or be resumed except by written direction of District and by agreement by Contractor.

  • First sampling In the first sampling four lamps are selected at random. The first sample of two is marked A, the second sample of two is marked B.

  • Emergency Transportation Ambulance services for emergencies.

  • Dangerous Materials Tenant shall not keep or have on the Premises any article or thing of a dangerous, flammable, or explosive character that might substantially increase the danger of fire on the Premises, or that might be considered hazardous by a responsible insurance company, unless the prior written consent of Landlord is obtained and proof of adequate insurance protection is provided by Tenant to Landlord.

  • Solid Waste The Licensee shall have to make arrangements for disposal of solid waste, which shall be got removed from the premises on a daily basis to ensure perfect cleanliness as per Corporation of Chennai Norms. The Licensee shall have to make arrangements for the solid waste to be separated into glass, plastic and food waste and for the food waste to be treated in a shredder to be converted into a paste. The waste shall need to be expelled into a common dump or waste area provided/ indicated by CMRL. If solid waste is found disposed of on CMRL land or premises a penalty/fine of Rs.2000/- shall be imposed by CMRL for each occasion.

  • Groundwater The groundwater shall not be degraded as a result of the waste maintained at the facility.

  • 342 Hazardous Substances Purchaser shall notify the National Response Center and Contracting Officer of all releases of reportable quantities of hazardous substances on or in the vicinity of Sale Area that are caused by Purchaser’s employees, agents, contractors, Subcontractors, or their employees or agents, directly or indirectly, as a result of Purchaser’s Operations, in accordance with 40 CFR 302.

  • Environmental Safety Upon encountering any previously unknown potentially hazardous material, or other materials potentially contaminated by hazardous material, Contractor shall immediately stop work activities impacted by the discovery, secure the affected area, and notify the ODR immediately.

  • Study Area The study area focused on the Bulk Power System in South-Eastern New York between Albany and New York City, and voltages underlying systems at 115 kV and above in the lower Xxxxxx Valley (Zones G, H & I). In the PSS™E power flow base case provided by NYISO, facilities rated at 115 kV and above in PSS™E designated areas 6 through 11 are monitored in the study. These areas are: • Capital District • Xxxxxx • Millwood • Xxxxxxxxx • Con Ed • Long Island

  • Sampling The Licensee agrees that the Composition is purchased as a “Work Made for Hire” whereby the clearing of any sampled materials is the responsibility of Licensee.

Time is Money Join Law Insider Premium to draft better contracts faster.