Manufacturing Technology Transfer With respect to each Technology Transfer Product, upon AbbVie’s written request after the Inclusion Date for the Included Target to which such Technology Transfer Product is Directed, Morphic shall effect a full transfer to AbbVie or its designee (which designee may be an Affiliate or a Third Party manufacturer) of all Morphic Know-How and Joint Know-How relating to the then-current process for the Manufacture of such Technology Transfer Product (the “Manufacturing Process”) and to implement the Manufacturing Process at facilities designated by AbbVie (such transfer and implementation, as more fully described in this Section 5.3, the “Manufacturing Technology Transfer”). To assist with the Manufacturing Technology Transfer, Morphic will make its personnel reasonably available to AbbVie during normal business hours for up to [***] FTE hours with respect to each Included Target (in each case, free of charge to AbbVie) to transfer and implement the Manufacturing Process under this Section 5.3. Thereafter, if requested by AbbVie, Morphic shall continue to perform such obligations; provided, that AbbVie will reimburse Morphic for its full-time equivalent (FTE) costs (for clarity, in excess of [***] FTE hours) and any reasonable and verifiable out-of-pocket costs incurred in providing such assistance. CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY [***], HAS BEEN OMITTED BECAUSE IT IS NOT MATERIAL AND WOULD LIKELY CAUSE COMPETITIVE HARM TO THE COMPANY IF PUBLICLY DISCLOSED.
Commercialization License Subject to the terms of this Agreement, including without limitation Section 2.2 and Theravance's Co-Promotion rights in Section 5.3.2, Theravance hereby grants to GSK, and GSK accepts, an exclusive license under the Theravance Patents and Theravance Know-How to make, have made, use, sell, offer for sale and import Alliance Products in the Territory.
SOURCE CODE ESCROW FOR LICENSED PRODUCT If Source Code or Source Code escrow is offered by either Contractor or Product manufacturer or developer to any other commercial customers, Contractor shall either: (i) provide Licensee with the Source Code for the Product; or (ii) place the Source Code in a third party escrow arrangement with a designated escrow agent who shall be named and identified to the State, and who shall be directed to release the deposited Source Code in accordance with a standard escrow agreement acceptable to the State; or (iii) will certify to the State that the Product manufacturer/developer has named the State, acting by and through the Authorized User, and the Licensee, as a named beneficiary of an established escrow arrangement with its designated escrow agent who shall be named and identified to the State and Licensee, and who shall be directed to release the deposited Source Code in accordance with the terms of escrow. Source Code, as well as any corrections or enhancements to such source code, shall be updated for each new release of the Product in the same manner as provided above and such updating of escrow shall be certified to the State in writing. Contractor shall identify the escrow agent upon commencement of the Contract term and shall certify annually that the escrow remains in effect in compliance with the terms of this clause. The State may release the Source Code to Licensees under this Contract who have licensed Product or obtained services, who may use such copy of the Source Code to maintain the Product.
Manufacturing (a) The Supplier shall without limitation be responsible, at no additional cost to the Purchaser, for: sourcing and procuring all raw materials for the Products; obtaining all necessary approvals, permits and licenses for the manufacturing of the Products; providing sufficient qualified staff and workers to perform the obligations under this Purchase Agreement; implementing and maintaining effective inventory and production control procedures with respect to the Products; and handling other matters as reasonably requested by the Purchaser from time to time.
Manufacturing Rights (a) If Tesla fails to supply Product ordered by ViewRay in accordance with the Section 3.3, in accordance with the terms of this Agreement regarding the quantity or quality of Products supplied to ViewRay, then Tesla shall use Commercially Reasonable Efforts to remedy the problem or secure an alternative source of supply within [***] at no cost to ViewRay, and any such alternative source of supply shall be on terms substantially identical with the terms of this Agreement. If Tesla is unable to remedy the problem or secure an alternative source of supply within [***] after its initial failure to supply, then Tesla shall consult with ViewRay and the parties shall work together to remedy the problem. If Tesla is unable to remedy the supply problem after [***] (or longer as agreed in writing by the parties), commencing with the date upon which such failure to supply began, then ViewRay may at its option, and upon notice to Tesla, manufacture the Products itself or through a third party in accordance with the provisions of Section 3.10(b).
License Rights The Recipient must provide a license to its “subject data” to the Federal Government, which license is: (a) Royalty-free, (b) Non-exclusive, and (c) Irrevocable, (2) Uses. The Federal Government’s license must permit the Federal Government to take the following actions provided those actions are taken for Federal Government purposes: (a) Reproduce the subject data, (b) Publish the subject data, (c) Otherwise use the subject data, and (d) Permit other entities or individuals to use the subject data, and
Development Rights The Employee agrees and declares that all proprietary information including but not limited to trade secrets, know-how, patents and other rights in connection therewith developed by or with the contribution of Employee's efforts during his employment with the Company shall be the sole property of the Company. Upon the Company's request (whenever made), Employee shall execute and assign to the Company all the rights in the proprietary information.
Sublicense Rights Subject to the terms and conditions of this Agreement, Astellas shall have the right to grant sublicenses of the rights granted to it under Section 3.1.1 and 2.5.3(c) through multiple tiers to its Affiliates, provided that Astellas shall be and remain responsible for performance of all its obligations under this Agreement, and any action by an Affiliate shall be deemed an action by Astellas for which it is responsible. Astellas and its Affiliates may grant sublicenses through multiple tiers to Third Parties (a) whose primary business is contract manufacturing, solely for manufacturing and supplying Licensed Compound or Product to Astellas or any Related Party or (b) to a subcontractor to perform Astellas’s assigned responsibilities under this Agreement or any Research Plan, Development Plan or Co-Promotion Plan. All other sublicenses to be granted by Astellas or any Astellas Affiliate in the Joint Development Territory prior to […***…] will require prior written approval from Ambit, which shall not be unreasonably withheld or delayed, provided that in the event such sublicense is to all of Astellas’s rights in the U.S. or the Joint Development Territory to a Person who is not an Astellas Affiliate such approval shall be at Ambit’s sole discretion. In the case of sublicenses pursuant to the immediately preceding sentence above, Astellas shall provide to Ambit, upon Ambit’ written request, a copy of all executed agreements in which rights granted by Ambit under this Agreement are sublicensed (and Astellas shall have the right to make reasonable redactions prior to providing such agreements(s)). Ambit shall treat all such sublicense agreements as Astellas’s Confidential Information. Astellas or its Affiliates may grant sublicenses (i) in the Joint Development Territory at any time after the first NDA Submission in the Joint Development Territory, provided that, with respect to each applicable Product in the U.S., the Required Exercise Date has occurred and Ambit has not exercised the Co-Promotion Option or the Co-Promotion Term has expired or terminated and (ii) outside the Joint Development Territory, in each case ((i) and (ii)) through multiple tiers of Sublicensees without Ambit’s approval. Each sublicense granted by Astellas pursuant to this Section 3.1.2 shall be subject and subordinate to the terms and conditions of this Agreement. Any sublicense granted by Astellas shall impose on the Sublicensee obligations consistent with the terms and conditions of this Agreement, with each Sublicensee being required to comply with the obligations under this Agreement applicable to Sublicensees, and also to comply with the generally-applicable obligations of this Agreement that are appropriate for application to Sublicensees. Astellas shall ensure that all Persons to which it (or its Affiliate) grants sublicenses comply with all applicable terms and conditions of this Agreement, and Astellas shall be responsible for any failure of any such Sublicensee to comply with such terms or conditions, with the further understanding that any action or omission by any such Sublicensee that, if committed by Astellas would be a breach of this Agreement (with respect to those country(ies)) in which such Sublicensee is sublicensed), will be deemed a breach by Astellas of this Agreement (with respect to those country(ies) in which such Sublicensee is sublicensed) for which Astellas is responsible. Without limiting the foregoing, no sublicense shall modify Ambit’s rights or obligations under this Agreement (including Ambit’s Co-Promotion rights). Without limiting the foregoing, any sublicense agreement shall contain the following provisions, as applicable: (i) a requirement that such Sublicensee submit applicable Net Sales or other reports consistent with those required hereunder; (ii) audit requirements similar to those set forth in this Agreement; and (iii) a requirement that such Sublicensee comply with the confidentiality provisions of Article 6 with respect to Ambit’s Confidential Information.
Development and Commercialization Subject to Sections 4.6 and 4.7, Fibrocell shall be solely responsible for the development and Commercialization of Fibrocell Products and Improved Products. Fibrocell shall be responsible for all costs incurred in connection with the Fibroblast Program except that Intrexon shall be responsible for the following: (a) costs of establishing manufacturing capabilities and facilities in connection with Intrexon’s manufacturing obligation under Section 4.6 (provided, however, that Intrexon may include an allocable portion of such costs, through depreciation and amortization, when calculating the Fully Loaded Cost of manufacturing a Fibrocell Product, to the extent such allocation, depreciation, and amortization is permitted by US GAAP, it being recognized that the majority of non-facilities scale-up costs cannot be capitalized and amortized under US GAAP); (b) costs of basic research with respect to the Intrexon Channel Technology and Intrexon Materials (i.e., platform improvements) but, for clarity, excluding research described in Section 4.7 or research requested by the JSC for the development of a Fibrocell Product or an Improved Product (which research costs shall be reimbursed by Fibrocell); (c) [*****]; and (d) costs of filing, prosecution and maintenance of Intrexon Patents. The costs encompassed within subsection (a) above shall include the scale-up of Intrexon Materials and related active pharmaceutical ingredients for clinical trials and Commercialization of Fibrocell Products undertaken pursuant to Section 4.6, which shall be at Intrexon’s cost whether it elects to conduct such efforts internally or through Third Party contractors retained by either Intrexon or Fibrocell (with Intrexon’s consent).
New Application for Licensure Any time after the three-month period has lapsed from the Effective Date of this Agreement and Respondent has paid the Administrative Penalty set forth in Section III, Paragraph 1 of this Order, Respondent may apply for a new mortgage loan originator license or, as applicable, petition for the reinstatement of an MLO Activity Endorsement in any or all of the Participating States with the understanding that each State Mortgage Regulator reserves the rights to fully investigate such application for licensure or petition for reinstatement of an MLO Activity Endorsement and may either approve or deny such application or petition pursuant to the normal process for such licensing or endorsement investigations. No license application or petition described in this paragraph will be denied solely based on the facts, circumstances, or consensual resolution provided for in this Agreement. Respondent further agrees that Respondent must satisfy the Administrative Penalty provision prior to submitting an application for a new mortgage loan originator license or, as applicable, petition for the reinstatement of an MLO Activity Endorsement.
