Function and Status of Bills of Lading Sample Clauses

Function and Status of Bills of Lading. Regardless of whether the Customer’s Customer is the shipper or consignee, Customer will be responsible for causing a bill of lading or other shipping instructions to accompany each shipment accurately describing the cargo, its origin and destination and containing other information reasonably requested by ASI. The Carrier will sign the bill of lading or shipping instructions upon receipt. The parties agree that the bill of lading or other form of receipt will be used solely to acknowledge receipt of the shipment and to identify the kind and quantity of goods, place of pickup and delivery, Customer and consignee and similar information. If ASI is erroneously identified as the “carrier” on any bill of lading or other documents at the origin point or in the course of transit, such designation does not in any way modify or amend the relationship between ASI and Customer under this Agreement or the role of ASI as an intermodal marketing company or broker. If there is a conflict between the terms contained on any bill of lading or shipping instructions, the terms of this Agreement will prevail. Notwithstanding, ASI shall have the rights of a “carrier” to pursue collection of any unpaid freight or accessorial charges from the Customer, shipper, consignee or their agents.
Sample 1
AutoNDA by SimpleDocs

Related to Function and Status of Bills of Lading

  • Compliance with Federal and State Work Authorization and Immigration Laws The Contractor and all subcontractors, suppliers and consultants must comply with all federal and state work authorization and immigration laws, and must certify compliance using the form set forth in Section 7 (“Georgia Security and Immigration Compliance Act Affidavits”). The required certificates must be filed with the Owner and copied maintained by the Contractor as of the beginning date of this contract and each subcontract, supplier contract, or consultant contract, and upon final payment to the subcontractor or consultant. State officials, including officials of the Georgia Department of Audits and Accounts, officials of the Owner, retain the right to inspect and audit the Project Site and employment records of the Contractor, subcontractors and consultants without notice during normal working hours until Final Completion, and as otherwise specified by law and by Rules and Regulations of the Georgia Department of Audits and Accounts.

  • Regulatory Requirements and Governing Law 43 14.1 Regulatory Requirements. 43 14.2 Governing Law 44 ARTICLE 15. NOTICES 44 15.1 General. 44 15.2 Xxxxxxxx and Payments. 44 15.3 Alternative Forms of Notice 44 15.4 Operations and Maintenance Notice 44 ARTICLE 16. FORCE MAJEURE 45 16.1 Force Majeure 45 ARTICLE 17. DEFAULT 45 17.1 Default. 45 ARTICLE 18. INDEMNITY, CONSEQUENTIAL DAMAGES AND INSURANCE 46 18.1 Indemnity. 46 18.2 No Consequential Damages. 47 18.3 Insurance 47 ARTICLE 19. ASSIGNMENT 49 19.1 Assignment. 49 ARTICLE 20. SEVERABILITY 49 20.1 Severability. 49 ARTICLE 21. COMPARABILITY 50 21.1 Comparability. 50 ARTICLE 22. CONFIDENTIALITY 50 22.1 Confidentiality. 50 ARTICLE 23. ENVIRONMENTAL RELEASES 53 23.1 Developer and Connecting Transmission Owner Notice 53 ARTICLE 24. INFORMATION REQUIREMENT 53 24.1 Information Acquisition. 53 24.2 Information Submission by Connecting Transmission Owner 54 24.3 Updated Information Submission by Developer 54 24.4 Information Supplementation 54 ARTICLE 25. INFORMATION ACCESS AND AUDIT RIGHTS 55 25.1 Information Access. 55 25.2 Reporting of Non-Force Majeure Events. 55 25.3 Audit Rights. 56 25.4 Audit Rights Periods. 56 25.5 Audit Results. 56 ARTICLE 26. SUBCONTRACTORS 56 26.1 General. 56 26.2 Responsibility of Principal. 57 26.3 No Limitation by Insurance 57 ARTICLE 27. DISPUTES 57 27.1 Submission 57 27.2 External Arbitration Procedures. 57 27.3 Arbitration Decisions. 58 27.4 Costs. 58 27.5 Termination 58 ARTICLE 28. REPRESENTATIONS, WARRANTIES AND COVENANTS 58 28.1 General. 58 ARTICLE 29. MISCELLANEOUS 59 29.1 Binding Effect. 59 29.2 Conflicts. 59 29.3 Rules of Interpretation 59 29.4 Compliance 60 29.5 Joint and Several Obligations. 60 29.6 Entire Agreement. 60 29.7 No Third Party Beneficiaries. 60 29.8 Waiver 60 29.9 Headings. 61 29.10 Multiple Counterparts. 61 29.11 Amendment. 61 29.12 Modification by the Parties. 61 29.13 Reservation of Rights. 61 29.14 No Partnership 62 29.15 Other Transmission Rights. 62 Appendices STANDARD LARGE GENERATOR INTERCONNECTION AGREEMENT THIS STANDARD LARGE GENERATOR INTERCONNECTION AGREEMENT (“Agreement”) is made and entered into this 17th day of April 2013, by and among Erie Boulevard Hydropower, LP (a limited partnership subsidiary of Brookfield Renewable Power), a company organized and existing under the laws of the State of New York (“Developer” with a Large Generating Facility), the New York Independent System Operator, Inc., a not-for-profit corporation organized and existing under the laws of the State of New York (“NYISO”), and Niagara Mohawk Power Corporation d/b/a National Grid, a corporation organized and existing under the laws of the State of New York (“Connecting Transmission Owner”). Developer, the NYISO, or Connecting Transmission Owner each may be referred to as a “Party” or collectively referred to as the “Parties.”

  • Technical Requirements for SCPs/Databases 10.5.3.1 BellSouth shall provide physical access to SCPs through the SS7 network and protocols with TCAP as the application layer protocol.

  • Effect of Addenda, Bulletins, and Change Orders No special implication, interpretation, construction, connotation, denotation, import, or meaning shall be assigned to any provision of the Contract Documents because of changes created by the issuance of any (1) Addendum, (2) Bulletin, or (3) Change Order other than the precise meaning that the Contract Documents would have had if the provision thus created had read originally as it reads subsequent to the (1) Addendum, (2) Bulletin, or (3) Change Order by which it was created.

  • Specifications and Standards a) All articles supplied shall strictly conform to the specifications, trademark laid down in the bidding document and wherever articles have been required according to ISI/ ISO/ other applicable specifications/ certifications/ standards, those articles should conform strictly to those specifications/ certifications/ standards. The supply shall be of best quality and description. The decision of the competent authority/ purchase committee whether the articles supplied conforms to the specifications shall be final and binding on the supplier/ selected bidder.

  • Compliance with Data Privacy and Security Laws and Standards Contractor shall comply with all applicable State and federal data privacy and data security laws, rules, and regulations.

  • New Hampshire Specific Data Security Requirements The Provider agrees to the following privacy and security standards from “the Minimum Standards for Privacy and Security of Student and Employee Data” from the New Hampshire Department of Education. Specifically, the Provider agrees to:

  • Pupil Safety and Fingerprinting CONTRACTOR shall comply with all provisions of the Education Code which protect the safety of any pupil that may come in contact with employees of the CONTRACTOR. Pursuant to Education Code section 45125.1, CONTRACTOR shall conduct criminal background checks of ALL employees of CONTRACTOR assigned to the PROJECT site, and shall certify that no employees who have been convicted of serious or violent felonies, as specified in Education Code Section 45125.1, will have contact with pupils, by utilizing the General Certification Regarding Background Checks Form. As part of such certification, CONTRACTOR must provide the District with a list of all employees providing services pursuant to this Agreement, and designate which sites such employees will be assigned. In performing the services set forth in this Agreement, CONTRACTOR shall not utilize any employees who are not included on the above-referenced list. At District’s sole discretion, District may make a finding, as authorized under Education Code section 45125.1, that CONTRACTOR’s employees will have only “limited contact” with pupils. In accordance with Education Code Section 45125.2, a CONTRACTOR performing construction, reconstruction, rehabilitation or repair services to a school facility shall not be required to perform Section 45125.1 background checks of all employees assigned to the PROJECT site if such CONTRACTOR installs a physical barrier at the worksite to limit employee contact with pupils and/or provides continual supervision and monitoring of all employees of the CONTRACTOR by an employee of the CONTRACTOR whom the Department of Justice has ascertained has not been convicted of a violent or serious felony. Such CONTRACTOR shall certify to the District its compliance with one of the aforementioned alternatives under Education Code Section 45125.2 pertaining to pupil safety with the form entitled CONSTRUCTION CONTRACTOR CERTIFICATION REGARDING BACKGROUND CHECKS which is on file at the Administrative Office of the DISTRICT. Contractor’s failure to comply with the law or Article VI, Paragraph 4 of this Agreement shall be considered a material breach of this Agreement upon where this Agreement may be terminated, at District’s sole discretion, without any further compensation to Contractor.

  • Changes to the Department's Requirements 5.1 The Department shall notify the Contractor of any material change to the Department's requirement under this Contract.

  • Technical Standards Applicable to a Wind Generating Plant i. Low Voltage Ride-Through (LVRT) Capability A wind generating plant shall be able to remain online during voltage disturbances up to the time periods and associated voltage levels set forth in the standard below. The LVRT standard provides for a transition period standard and a post-transition period standard.

Time is Money Join Law Insider Premium to draft better contracts faster.