ESG Pricing Sample Clauses

ESG Pricing. The Administrative Agent, the Lenders and the Borrower shall in good faith enter into discussions to reach an agreement in respect of the proposed Sustainability Targets and Sustainability Assurance Provider (if any), and any proposed incentives and penalties for compliance and noncompliance, respectively, with the Sustainability Targets, including any adjustments to the Applicable Margin (and/or the Applicable Commitment Fee Rate therein) (such provisions, collectively, the “ESG Pricing Provisions”); provided that the amount of any such adjustments made pursuant to an ESG Amendment shall not result in a decrease or an increase of more than (i) 0.01% in the Applicable Commitment Fee Rate set forth in the definition of “Applicable Margin” and/or (ii) 0.03% in the Revolving Credit Term SOFR Rate Spread or the Revolving Credit Base Rate Spread set forth in the definition of “Applicable Margin” (the spreads referenced in the immediately foregoing clause (ii), the “Specified Spreads”) during any calendar year, which pricing adjustments shall be applied in accordance with the terms as further described in the ESG Pricing Provisions; provided that (i) in no event shall any of the Specified Spreads or the Applicable Commitment Fee Rate be less than 0% at any time and (ii) for the avoidance of doubt, such pricing adjustments shall not be cumulative year-over-year, and each applicable adjustment shall only apply until the date on which the next adjustment is due to take place pursuant to the ESG Pricing Provisions. The ESG Amendment (including the ESG Pricing Provisions) will become effective once the Borrower, the Administrative Agent and the Required Lenders have executed the ESG Amendment. The Borrower agrees and confirms that the ESG Pricing Provisions shall follow the Sustainability Linked Loan Principles, as published in May 2021, and as may be updated, revised or amended from time to time by the Loan Market Association and the Loan Syndications & Trading Association (the “SLL Principles”).
Sample 1
AutoNDA by SimpleDocs

Related to ESG Pricing

  • TIPS Pricing Vendor agrees and understands that for each TIPS Contract that it holds, Vendor submitted, agreed to, and received TIPS’ approval for specific pricing, discounts, and other pricing terms and incentives which make up Vendor’s TIPS Pricing for that TIPS Contract (“TIPS Pricing”). Vendor confirms that Vendor will not add the TIPS Administration Fee as a charge or line-item in a TIPS Sale. Vendor hereby certifies that Vendor shall only offer goods and services through this TIPS Contract if those goods and services are included in or added to Vendor’s TIPS Pricing and approved by TIPS. TIPS reserves the right to review Vendor’s pricing update requests as specifically as line-item by line-item to determine compliance. However, Vendor contractually agrees that all submitted pricing updates shall be within the original terms of the Vendor’s TIPS Pricing (scope, proposed discounts, price increase limitations, and other pricing terms and incentives originally proposed by Vendor) such that TIPS may accept Vendors price increase requests as submitted without additional vetting at TIPS discretion. Any pricing quoted by Vendor to a TIPS Member or on a TIPS Quote shall never exceed Vendor’s TIPS Pricing for any good or service offered through TIPS. Vendor certifies by signing this agreement that Vendor’s TIPS Pricing for all goods and services included in Vendor’s TIPS Pricing shall either be equal to or less than Vendor’s current pricing for that good or service for any other customer. TIPS Pricing price increases and modifications, if permitted, will be honored according to the terms of the solicitation and Vendor’s proposal, incorporated herein by reference.

  • Unit Pricing If required by the Bid Specifications, the Bidder should insert the price per unit specified and the price extensions in decimals, not to exceed four places for each item unless otherwise specified, in the Bid. In the event of a discrepancy between the unit price and the extension, the unit price shall govern unless, in the sole judgment of the Commissioner, such unit pricing is obviously erroneous.

  • GSA Benchmarked Pricing Additionally, where the NYS Net Price is based upon an approved GSA Supply Schedule:

  • HOT LIST PRICING At any time during this Contract, Supplier may offer a specific selection of Equipment, Products, or Services at discounts greater than those listed in the Contract. When Supplier determines it will offer Hot List Pricing, it must be submitted electronically to Sourcewell in a line-item format. Equipment, Products, or Services may be added or removed from the Hot List at any time through a Sourcewell Price and Product Change Form as defined in Article 4 below. Hot List program and pricing may also be used to discount and liquidate close-out and discontinued Equipment and Products as long as those close-out and discontinued items are clearly identified as such. Current ordering process and administrative fees apply. Hot List Pricing must be published and made available to all Participating Entities.

  • Educational Pricing All Products to be supplied for educational purposes that are subject to educational discounts shall be identified in the Bid and such discounts shall be made available to qualifying institutions.

  • Pricing The Contractor will not exceed the pricing set forth in the Contract documents.

  • JOC Pricing of Itemized List of Means Non-Prepriced Items” based on the information herein. This Addendum is only to correct a misstatement on the original optional attachment entitled “PART 2 JOC Pricing of Itemized List of Means Non-Prepriced Items.” The attachment mistakenly provided for and discussed “Attribute 39.” Specifically, any erroneous reference to “Attribute 39” on the specified attachment should be considered immediately replaced with “the Attribute Question asking for Pricing for Markup of Non- Prepriced Items in RS Means Unit Price Book.” Please disregard any reference to Attribute 39 on this optional form and consider it to be referencing the Attribute Question asking for “Pricing for Markup of Non-Prepriced Items in RS Means Unit Price Book” instead. TIPS RFP 220106 Comprehensive HVAC (2 Part with JOC) ALL INFORMATION MUST BE TYPED AND FORM MUST BE UPLOADED IN EXCEL FORMAT. DO NOT HANDWRITE REFERENCES AND DO NOT CONVERT EXCEL REFERENCES Please provide five (5) references from five different entities, preferably from school districts or other governmental entities who have u the last three years. Additional references may be required. DO NOT INCLUDE TIPS EMPLOYEES AS A REFERENCE. Verify your references emails are deliverable and that they agree to provide a reference. Failure to do this may delay the evaluation process. You may provide more than five (5) references. Entity Name Contact Person VALID EMAIL IS REQUIRED Phone Little Rock School District Xxxx Xxxxx xxxxxxx.xxxxx@xxxx.xxx 000-000-0000 North Little Rock Xxxxxx Xxxxx xxxxxx@xxxxx.xxx 000-000-0000 City of Xxxxxx Xxxxx Xxxxx xxxxxx@xxxxxxxxxxxx.xxx 000-000-0000 Xxxxx Springs Baptist Church Xxxx Xxxxxx xxxxxxx@xxxxx.xxx 000-000-0000 Bryant School District Dr. Xxxxx Xxxxxxx xxxxxxxx@xxxxxxxxxxxxx.xxx 000-000-0000 TIPS RFP # 220106 Required Confidential Information Status Form Middleton Inc. dba Middleton Heat & Air Name of company Xxxx Xxxxxx, Sales Manager Printed Name and Title of authorized company officer declaring below the confidential status of material 22039 Interstate 30 Bryant AR 72022 501-529-1055 Address City State ZIP Phone ALL VENDORS MUST COMPLETE THE ABOVE SECTION CONFIDENTIAL INFORMATION SUBMITTED IN RESPONSE TO COMPETITIVE PROCUREMENT REQUESTS OF EDUCATION SERVICE CENTER REGION 8 AND TIPS (ESC8) IS GOVERNED BY TEXAS GOVERNMENT CODE, CHAPTER 552 If you consider any portion of your proposal to be confidential information and not subject to public disclosure pursuant to Chapter 552 Texas Gov't Code or other law(s), you must attach a copy of all claimed confidential materials within your proposal and put this COMPLETED form as a cover sheet to said materials then scan, name “CONFIDENTIAL” and upload with your proposal submission. (You must include all the confidential information in the submitted proposal. The copy uploaded is to indicate which material in your proposal, if any, you deem confidential in the event the receives a Public Information Request.) ESC8 and TIPS will follow procedures of controlling statute(s) regarding any claim of confidentiality and shall not be liable for any release of information required by law. Upon your claim and your defense to the Office of Texas Attorney General is required to make the final determination whether the information submitted by you and held by ESC8 and TIPS is confidential and exempt from public disclosure. ALL VENDORS MUST COMPLETE ONE OF THE TWO OPTIONS BELOW. OPTION 1: I DO CLAIM parts of my proposal to be confidential and DO NOT desire to expressly waive a claim of confidentiality of all information contained within our response to the solicitation. The attached contains material from our proposal that I classify and deem confidential under Texas Gov't Code Sec. 552 or other law(s) and I invoke my statutory rights to confidential treatment of the enclosed materials. IF CLAIMING PARTS OF YOUR PROPOSAL CONFIDENTIAL, YOU MUST ATTACH THE SHEETS TO THIS FORM AND LIST THE NUMBER OT TOTAL PAGES THAT ARE CONFIDENTIAL. ATTACHED ARE COPIES OF PAGES OF CLAIMED CONFIDENTIAL MATERIAL FROM OUR PROPOSAL THAT WE DEEM TO BE NOT PUBLIC INFORMATION AND WILL DEFEND THAT CLAIM TO THE TEXAS ATTORNEY GENERAL IF REQUESTED WHEN A PUBLIC INFORMATION REQUEST IS MADE FOR OUR PROPOSAL. Signature Date OR OPTION 2: I DO NOT CLAIM any of my proposal to be confidential, complete the section below.

  • Closing Price Closing Price shall mean the last reported market price for one share of Common Stock, regular way, on the New York Stock Exchange (or any successor exchange or stock market on which such last reported market price is reported) on the day in question. If the exchange is closed on the day on which the Closing Price is to be determined or if there were no sales reported on such date, the Closing Price shall be computed as of the last date preceding such date on which the exchange was open and a sale was reported.

  • Requesting Price Increase/Required Documentation Contractor must submit a written notification at least thirty (30) calendar days prior to the requested effective date of the change, setting the amount of the increase, along with an itemized list of any increased prices, showing the Contractor’s current price, revised price, the actual dollar difference and the percentage of the price increase by line item. Price change requests must include H-GAC Forms D Offered Item Pricing and E Options Pricing, or the documentation used to submit pricing in the original Response and be supported with substantive documentation (e.g. manufacturer's price increase notices, copies of invoices from suppliers, etc.) clearly showing that Contractor's actual costs have increased per the applicable line item bid. The Producer Price Index (PPI) may be used as partial justification, subject to approval by H-GAC, but no price increase based solely on an increase in the PPI will be allowed. This documentation should be submitted in Excel format to facilitate analysis and updating of the website. The letter and documentation must be sent to the Bids and Specifications manager, Xxxxxxx Xxxxxx, at Xxxxxxx.Xxxxxx@x-xxx.xxx Review/Approval of Requests If H-GAC approves the price increase, Contractor will be notified in writing; no price increase will be effective until Contractor receives this notice. If H-GAC does not approve Contractor’s price increase, Contractor may terminate its performance upon sixty (60) days advance written notice to H-GAC, however Contractor must fulfill any outstanding Purchase Orders. Termination of performance is Contractor’s only remedy if H-GAC does not approve the price increase. H-GAC reserves the right to accept or reject any price change request.

  • JOC - PRICING OF After Hours Coefficient What is your after hours coefficient for the RS Means Price Book for work performed after normal working hours? (FAILURE TO RESPOND PROHIBITS PART 2 JOC EVALUATION) Remember that this is a ceiling price proposed. You can discount to any TIPS Member customer a lower coefficient than your proposed contract coefficient, but not higher. This is one of three pricing questions that are required for consideration for award on this solicitation. Please consider your answer carefully. An explanation of the TIPS scoring of pricing titled "Pricing Coefficient Instruction" is included in the attachments for your information. The below is an EXAMPLE of how the pricing model works (It is not intended to influence your proposed coefficient, you should propose a coefficient that you determine is reasonable for your business for the life of the contract): The most common after hours coefficient is time and a half of the RS Means Unit Price Book prices. To illustrate this coefficient, if your regular hours coefficient is .95, your after hours coefficient would be 1.45.

Time is Money Join Law Insider Premium to draft better contracts faster.