Equipment Calibration and Replacement Sample Clauses

Equipment Calibration and Replacement. Provider may request to have the meteorological equipment independently calibrated or replaced at its own expense every eighteen (18) to thirty (30) months. Provider shall notify the Customer of the scheduled calibration date and time no less than 30 days prior, and shall provide the Customer written proof of calibration or replacement.
Sample 1Sample 2Sample 3See All (12)
AutoNDA by SimpleDocs
Equipment Calibration and Replacement. SunPower may request to have the meteorological equipment independently calibrated or replaced at its own expense every eighteen to thirty months. SunPower shall notify the other party of the scheduled calibration date and time no less than 30 days prior, and shall provide the Customer written proof of calibration or replacement.
Sample 1
Equipment Calibration and Replacement. Provider may request to have the meteorological equipment independently calibrated or replaced at its own expense every eighteen to thirty months. The provider shall notify the other party of the scheduled calibration date and time no less than 30 days prior and shall provide the Customer with written proof of calibration or replacement. ⮚ Contingency for Equipment Failure: In the event of hardware, communication, or other failure affecting the DAS, Provider will make commercially reasonable efforts to resolve the failure in a timely manner. If data is lost, Actual Generation shall be adjusted to compensate for such lost data, which shall be Provider’s sole liability, and Customer’s exclusive remedy, for any Guaranteed Output arising from any equipment failure or lost data relating to the DAS: ⮚ In lieu of lost meteorological data, Provider will assume Standard operationutilize such data obtained from a nearby meteorological station that Provider monitors and selects for such purpose. ⮚ In lieu of lost electricity data, and Provider has adequately demonstrated that the system has generated energy, Provider will utilize the cumulative data from System meter readings to calculate the electricity generated during the missing interval. If data from the System meter is inaccurate or missing, the Provider will simulate electricity production during the missing interval utilizing measured meteorological data and PVsyst. The simulated electricity production during the missing interval will be added to the Actual Generation for the subject Guarantee Period.
Sample 1

Related to Equipment Calibration and Replacement

  • Maintenance, Repair and Replacement Tenant shall keep all such Fixtures in good order and shall maintain, repair and replace the same when necessary with items at least equal in utility to the Fixtures being replaced, provided however, that Tenant will not be required to maintain, repair and replace any Fixtures which performed a function which has become obsolete or otherwise is no longer necessary or desirable in connection with the use or operation of the Premises, unless such failure to replace would reduce the value of the Premises or would result in a reduced level of maintenance of the Premises, in which case Tenant shall be required to install such Fixtures as may be necessary to prevent such reduction in the value of the Premises or in the level of maintenance.

  • Repair and Replacement Company shall be responsible to Lessor for reasonable replacement costs, or reasonable repair costs of all Equipment which is lost, stolen, or damaged while in the care, custody and control of Company as a result of Company's sole negligence in accordance with paragraph 2 above, reasonable wear and tear excepted, using the Actual Cash Value of the Equipment at the time of such loss. Prior to repairing the Equipment, Lessor shall submit to Company at least three estimates, including at least one estimate from a repair facility designated by Company. In the event the Equipment is lost or stolen, Company shall file a police report.

  • Equipment Maintenance If this Contract involves computer or telecommunications hardware or other mechanical or electrical Equipment (use of the word "Equipment" means all the foregoing) as a Deliverable, then, during the warranty period and during any period covered by annual maintenance, the Contractor will provide Equipment maintenance to keep the Equipment in or restore the Equipment to good working order. This maintenance will include preventative and remedial maintenance, installation of safety changes, and installation of engineering changes based upon the specific needs of the individual item of Equipment. This maintenance will also include the repair, replacement, or exchange deemed necessary to keep the Equipment in good working order. For purposes of this Contract, Equipment restored to good working condition means Equipment that performs in accordance with the manufacturer's published specifications. The Contractor will exert its best efforts to perform all fault isolation and problem determination attributed to the Equipment covered under this Contract. The following services are outside the scope of this Contract:

  • Testing of Metering Equipment Connecting Transmission Owner shall inspect and test all of its Metering Equipment upon installation and at least once every two (2) years thereafter. If requested to do so by NYISO or Developer, Connecting Transmission Owner shall, at Developer’s expense, inspect or test Metering Equipment more frequently than every two (2) years. Connecting Transmission Owner shall give reasonable notice of the time when any inspection or test shall take place, and Developer and NYISO may have representatives present at the test or inspection. If at any time Metering Equipment is found to be inaccurate or defective, it shall be adjusted, repaired or replaced at Developer’s expense, in order to provide accurate metering, unless the inaccuracy or defect is due to Connecting Transmission Owner’s failure to maintain, then Connecting Transmission Owner shall pay. If Metering Equipment fails to register, or if the measurement made by Metering Equipment during a test varies by more than two percent from the measurement made by the standard meter used in the test, Connecting Transmission Owner shall adjust the measurements by correcting all measurements for the period during which Metering Equipment was in error by using Developer’s check meters, if installed. If no such check meters are installed or if the period cannot be reasonably ascertained, the adjustment shall be for the period immediately preceding the test of the Metering Equipment equal to one-half the time from the date of the last previous test of the Metering Equipment. The NYISO shall reserve the right to review all associated metering equipment installation on the Developer’s or Connecting Transmission Owner’s property at any time.

  • Maintenance and Repairs 7.1 Tenant shall, at its expense, throughout the Term and all renewals and extensions thereof, maintain in good order, condition and repair the Premises, including but not limited to heating and air conditioning equipment, walls, floors and ceilings, window exteriors, mechanical and electrical systems and equipment exclusively serving the Premises, electric light fixtures, bulbs, tubes and tube casings, doors, floor coverings, dock doors, levelers, plumbing system and plumbing fixtures, Tenant’s signs and utility facilities not maintained by Landlord. Landlord shall use reasonable efforts to extend to Tenant the benefit from warranties on such items, if any, that have been made by Landlord’s contractors or vendors and to extend to Tenant, as and if available, any bulk buying power that Landlord may have with such contractors or vendors. If any portion of the Premises or any system or equipment in the Premises which Tenant is obligated to repair cannot be fully repaired, Tenant shall promptly replace the same, regardless of whether the benefit of such replacement extends beyond the Term. Tenant shall, at Tenant’s expense, maintain a preventive maintenance contract providing for the regular inspection (at least quarterly) and maintenance of the heating and air conditioning system by a licensed and qualified heating and air conditioning contractor, or Tenant shall perform such HVAC inspection and maintenance with duly licensed and qualified employee. The cost of such preventive maintenance contract shall be paid by Tenant and an expense solely chargeable to Tenant; but if Landlord so elects, same may be billed directly by Landlord to Tenant where Landlord on Tenant’s behalf enters into such preventive maintenance contract and in such case shall be deemed Additional Rent (Landlord alone may so elect whether to enter into such preventive maintenance contract on Tenant’s behalf). Landlord shall have the right, upon notice to Tenant, to undertake the responsibility for preventive maintenance of any other system or component at Tenant’s expense. Tenant shall be responsible for janitorial services and trash removal from the Premises, at Tenant’s expense. Landlord and Tenant intend that, at all times during the Term, Tenant shall maintain the Premises in good order and condition and appearances reasonably commensurate with the balance of the Property. All of Tenant’s obligations to maintain and repair shall be accomplished at Tenant’s sole expense. If Tenant fails to maintain and repair the Premises as required by this Section, Landlord may, on 10 days’ prior written notice (except that no notice shall be required in case of emergency), enter the Premises and perform such maintenance or repair on behalf of Tenant; provided such entry is made in compliance with Applicable Laws, including but not limited to, the Marijuana code. In such cases, Tenant shall reimburse Landlord immediately upon demand for all costs incurred in performing such maintenance or repair plus an administration fee equal to 5% of such actual and reasonable costs or expenses.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!