Parts Manufacturer Approval definition

Parts Manufacturer Approval means the authority granted by the FAA to manufacture parts for installation in type-certificated products.
Sample 1Sample 2Sample 3
Parts Manufacturer Approval or “PMA” shall mean the necessary approvals from the CAAI under the terms of BASA IPA or to the extent the terms of the BASA IPA do not permit the CAAI to issue an approval acceptable to the FAA, direct from the FAA, for Supplier to manufacture parts for the Conversion;
Sample 1Sample 2Sample 3
Parts Manufacturer Approval or "PMA" means the authority granted to a legal entity by the FAA and described in 14 C.F.R. § 21.303, to produce modification or replacement parts for sale for installation on type certificated products.
Sample 1

Examples of Parts Manufacturer Approval in a sentence

  • Such components may be installed under an FAA Parts Manufacturer Approval (PMA), Supplemental Type Certificate (STC) or other modification.

  • When an investigation involves a production approval, investigative personnel obtain and include as IOPs copies of the Technical Standard Order (TSO), Parts Manufacturer Approval (PMA), type design, portions of the Quality Control Manual pertaining to production approvals and traceability, any relevant statement from quality control personnel, and all available photographs of relevant parts.

  • Regulatory approval, such as Parts Manufacturer Approval (PMA), is granted by the FAA or appropriate non-U.S. equivalent regulatory agency.

  • Regulatory approval, such as FAA Parts Manufacturer Approval (PMA), is granted by Civil Aviation Authorities.

  • Unless explicit contractual direction is given to the contrary, no articles (or constituent parts thereof) ordered by Boeing Commercial Airplanes shall contain any Federal Aviation Administration- Parts Manufacturer Approval (FAA-PMA) markings and the accompanying paperwork (e.g., packages, shippers, etc.) shall not contain any FAA-PMA markings.

  • Unless explicit contractual direction is given to the contrary, no articles (or constituent parts thereof) ordered by Boeing Commercial Airplane Co. purchased under this agreement shall contain any Federal Aviation Administration- Parts Manufacturer Approval (FAA-PMA) markings and the accompanying paperwork (e.g., packages, shippers, etc.) shall not contain any FAA-PMA markings.

  • Sample PMA Letter of Application The ABC Tool Company 3000 Hill St.Randolph, MA 02368(781) 555-1212 FAA - New England Region12 New England Executive Park Burlington, MA 01803(781) 238-7199 Attention: Mr. Mark StealeManager, Boston Manufacturing Inspection District Office, ANE-MIDO-42 Subject: Request for New FAA-PMA Approval Mr. Steale:The ABC Tool Company is submitting an application for Parts Manufacturer Approval for our part number (P/N) ABC 13579.

  • Each holder of a Parts Manufacturer Approval shall establish and maintain a fabrication inspection system that ensures that each completed part conforms to its design data and is safe for installation on applicable type certificated products.

  • The Administrator does not issue a Parts Manufacturer Approval if the manufacturing facilities for the part are located outside of the United States, unless the Administrator finds that the location of the manufacturing facilities places no burden on the FAA in administering applicable airworthi- ness requirements.

  • The Authority does not issue a Parts Manufacturer Approval if the manufacturing facilities for the part are located outside of the republic of the Philippines, unless the Authority finds that the location of the manufacturing facilities places no burden on the Authority in administering applicable airworthiness requirements.


More Definitions of Parts Manufacturer Approval

Parts Manufacturer Approval or “PMA” means a combined design and production approval for modification and replacement parts for aircraft engines granted by the FAA in accordance with FAA order 8110.42C. Parts listed in the OEM IPC shall not be considered PMA parts for the purpose of this Agreement.
Sample 1
Parts Manufacturer Approval means the design and production approval issued for the production of modification or replacement parts of a product (including materials, parts, processes, and appliances) in accordance with the Chapter 8 of "CCAR-21 Certification Procedures for Civil Aviation Products and Parts" or Subpart K of "HKAR-21 Certification of Aircraft and Related Products, Parts and Appliances, and of Design and Production Organisations" requirements.
Sample 1
Parts Manufacturer Approval. (PMA) means a combined design and production approval issued by the FAA for modification and replacement articles. It allows a manufacturer to produce and sell these articles for installation on type certificated products.
Sample 1
Parts Manufacturer Approval means the authority granted by the FAA to manufacture parts for installation in type-certificated products. “Xxxxx & Whitney” is United Technologies International Corporation, a corporation organized and existing under the laws of Delaware, United States of America, acting through its Xxxxx & Xxxxxxx Division, which has an office located at 000 Xxxx Xxxxxx, Xxxx Xxxxxxxx, Xxxxxxxxxxx 00000 XXX. Xxxxx & Whitney Proprietary - Subject to the Restrictions on the Front Page This document does not contain any technical data subject to the ITAR or the EAR. “[* * *]” This information is subject to confidential treatment and has been omitted and filed separately with the commission.
Sample 1

Related to Parts Manufacturer Approval

  • Original manufacturer means the original component manufacturer, the original equipment manufacturer, or the contract manufacturer.

  • Engine Manufacturer means CFM International, Inc.

  • Satellite Manufacturer means, with respect to any Satellite, the prime contractor and manufacturer of such Satellite.

  • City-based manufacturer means a person who: (i) holds any appropriate city license; (ii) is subject to applicable city taxes; and (iii) owns, operates, or leases a manufacturing facility within the city.

  • Product Manufacturer means the entity that assembles the component parts to manufacture the final Product;

  • Tobacco product manufacturer means an entity that after the date of enactment of this Act directly (and not exclusively through any affiliate):

  • Motor vehicle manufacturer means any of the following:

  • Distillery manufacturing license means a license issued in accordance with

  • Successor manufacturer means a manufacturer that acquires, succeeds to, or assumes any part of the business of another manufacturer as the result of any of the following:

  • Third Party Manufacturer means any person, firm or company which carries out the reproduction of Work and/or manufactures and/or prints the Licensed Publication on behalf of the Licensee;

  • Product Approval means the approval of a Governmental Authority necessary for the marketing and sale of the Product in a given country or regulatory jurisdiction, which may include the approval of an MAA (but shall not include any Pricing Approvals).

  • MAA Approval means approval of an MAA by the applicable Regulatory Authority for marketing and sale of a Product in the Collaborator Territory, but excluding any Pricing and Reimbursement Approval.

  • Original component manufacturer means an organization that designs and/or engineers a part and is entitled to any intellectual property rights to that part.

  • IRB approval means the determination of the IRB that the research has been reviewed and may be conducted at an institution within the constraints set forth by the IRB and by other institutional and federal requirements.

  • Original equipment manufacturer means a company that manufactures products that it has designed from purchased components and sells those products under the company's brand name.

  • Contract Manufacturer means a company that produces goods under contract for another company under the label or brand name of that company.

  • CPUC Approval means a final and non-appealable order of the CPUC, without conditions or modifications unacceptable to the Parties, or either of them, which contains the following terms:

  • Requisite Regulatory Approvals has the meaning set forth in Section 7.01(b).

  • Remanufacturing means the activity of overhauling, retrofitting, fabricating, or repairing a product or its component parts for ultimate sale at retail.

  • FDA Approval means the approval by the FDA of a premarket approval application to market and sell a Product, as evidenced by the publication of such approval by the FDA.

  • Manufacturer means the person or body responsible to the approval authority for all aspects of the type approval process and for ensuring conformity of production. It is not essential that the person or body is directly involved in all stages of the construction of the vehicle which is the subject of the approval process.

  • Locally manufactured goods means goods whose value, either in whole or in part, is derived from growing, producing, processing, assembling, or manufacturing activities that occur within a city-based manufacturer's facility located within the city.

  • NDA Approval means the Approval of an NDA by the FDA for a Product in the U.S.

  • Manufactured good means a good brought to the construction site for incorporation into the building or work that has been--

  • Modular building manufacturer means a person or corporation who owns or operates a

  • Medical marijuana product means a product that contains cannabinoids that have been extracted from plant material or the resin therefrom by physical or chemical means and is intended for administration to a licensed patient, including but not limited to concentrates, oils, tinctures, edibles, pills, topical forms, gels, creams, and other derivative forms, except that this term does not include live plant forms.