Notch definition

Notch means any change in gradation (+ and - for S&P; l, 2 and 3 for Moody's) with respect to Rating Categories.
Notch or “undercut” means a notch made in a standing tree at the beginning of the felling operation that guides the direction of the fall of the tree.
Notch notch of crystal orientation shall be no bigger than 1x0.3mm, and there shall be no more than one notch on each wafer.

Examples of Notch in a sentence

  • Notch and dimple joining branch tube in a single process to provide free flow where the branch tube penetrates the fitting.

  • Groove, Drill or Notch, and Roll and Polish;unless otherwise specifically listed as a covered benefit in the Schedule of Benefits.

  • Notch filter to prevent operation of the controller-motor-load combination at a natural frequency of the combination.

  • Notch signaling: cell fate control and signal integration in development.

  • The canonical Notch signaling pathway: unfolding the activation mechanism.

  • Loss-of-function mutations in Notch receptors in cutaneous and lung squamous cell carcinoma.

  • General design principles - Aqueducts – Syphon aqueduct (Type III) – Canal drop (Notch Type) – Drawing showing plan, elevation and foundation details.

  • Rafters: Notch to fit exterior wall plates and toe nail or use metal framing anchors.

  • Standard Practice for Measurement of Wet Film Thickness by Notch Gages.

  • Engineering Customized Cell Sensing and Response Behaviors Using Synthetic Notch Receptors.


More Definitions of Notch

Notch notch of crystal orientation on any subject silicon wafer shall be no bigger than 1x0.3mm, and there shall be no more than two notches on any subject --------------------------------------------------------------------------------------------------------------------------------- * Confidential Treatment Requested. The redacted material has been separately filed with the Securities and Exchange Commission. --------------------------------------------------------------------------------------------------------------------------------- NAME OF SUBJECT TECHNICAL SPECIFICATIONS QUANTITY PRETAX UNIT DELIVERY SCHEDULE PRODUCT PRICE (RMB YUAN/PIECE) --------------------------------------------------------------------------------------------------------------------------------- silicon wafer.
Notch notch of crystal orientation on any subject silicon wafer shall be no bigger than 1x0.3mm, and there shall be no more than two notches on any subject -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- NAME OF SUBJECT TECHNICAL SPECIFICATIONS QUANTITY PRETAX UNIT PRODUCT PRICE (RMB YUAN/PIECE) -------------------------------------------------------------------------------- silicon wafer.

Related to Notch

  • Level 5 means a project of greater than 2 MWac.

  • Level 4 means a project of greater than 550 kWac and not more than 1 MWac.

  • Level IV shall exist at any time the Total Leverage Ratio is greater than or equal to 4.00:1.0 but less than 4.50:1.0.

  • Level 2 means a charging system that provides charging through a two-hundred- eight to two-hundred-forty volt AC plug with a cord connector that meets the SAE international J1772 standard or a successor standard.

  • Level 1 means a charging system that provides charging through a one-hundred- twenty volt AC plug with a cord connector that meets the SAE international J1772 standard or a successor standard.

  • Debt Ratings has the meaning set forth in the definition of “Applicable Rate.”

  • Level II means a component of the federal PASRR requirement. Level II refers to the evaluation and determination of whether nursing facility services and specialized services are needed for individuals with mental illness or developmental disability who are potential nursing facility admissions, regardless of the source of payment for the nursing facility service (42 CFR 483.128(a)). Level II evaluations include assessment of the individual’s physical, mental, and functional status (42 CFR 483.132).

  • Xxxxx’x Rating means, at any time, the rating issued by Xxxxx’x and then in effect with respect to the Borrower’s senior unsecured long-term debt securities without third-party credit enhancement.

  • Applicable Rating Level at any time and for any Borrower shall be determined in accordance with the then-applicable S&P Rating and the then-applicable Xxxxx’x Rating for such Borrower as follows: S&P Rating/Xxxxx’x Rating Applicable Rating Level S&P Rating A or higher or Xxxxx’x Rating A2 or higher 1 S&P Rating A- or higher or Xxxxx’x Rating A3 or higher 2 S&P Rating BBB+ or Xxxxx’x Rating Baa1 3 S&P Rating BBB or Xxxxx’x Rating Baa2 4 S&P Rating BBB- or Xxxxx’x Rating Baa3 5 S&P Rating BB+ or below or Xxxxx’x Rating Ba1 or below, or no S&P Rating or Xxxxx’x Rating 6 The Applicable Rating Level for any Borrower and for any day shall be determined based upon the higher of the S&P Rating and the Xxxxx’x Rating for such Borrower in effect on such day. If the S&P Rating and the Xxxxx’x Rating are not the same (i.e., a “split rating”), the higher of such ratings shall control, unless (i) the ratings differ by more than one level, in which case the rating one level below the higher of the two ratings shall control, or (ii) either rating is below BBB- or Baa3 (as applicable), in which case the lower of the two ratings shall control.

  • Mxxxx’x Rating means, with respect to a Reference Obligation, as of any date of determination:

  • Level I means a component of the federal PASRR requirement. Level I refers to the identification of individuals who are potential nursing facility admissions who have indicators of mental illness or developmental disabilities (42 CFR 483.128(a)).

  • Stable means that a rating is not likely to change

  • Pricing Level IV means any time when (i) no Event of Default has occurred and is continuing, (ii) the Senior Debt Rating is BBB- or higher by S&P or Baa3 or higher by Moody’s and (iii) Pricing Levels I, II and III do not apply.

  • Debt Rating has the meaning specified in the definition of “Applicable Rate.”

  • Aa3 by Moody's or are rated "Aa3" by Moody's and such rating is on watch for possible downgrade (but only for so long as it is on watch for possible downgrade), or (C) either (i) the unsecured, short-term debt obligations of Party A (or its Credit Support Provider) are rated below "A-1" by S&P or (ii) if Party A (or its Credit Support Provider) does not have a short-term rating from S&P, the unsecured, long-term senior debt obligations of Party A (or its Credit Support Provider) are rated below "A+" by S&P (such event, a "Collateralization Event"), then, Party A, at its own cost and subject to the Rating Agency Condition, shall within 30 days either (i) cause another entity to replace Party A as party to this Agreement that satisfies the Swap Counterparty Ratings Requirement and that is approved by the Trustee (which approval shall not be unreasonably withheld) on terms substantially similar to this Agreement; (ii) obtain a guaranty of, or a contingent agreement of another person that satisfies the Swap Counterparty Ratings Requirement, to honor Party A's obligations under this Agreement, provided that such other person is approved by the Trustee such approval not to be unreasonably withheld; (iii) post collateral in accordance with a Credit Support Annex which satisfies the Rating Agency Condition; or (iv) establish any other arrangement satisfactory to the applicable Swap Rating Agency which will be sufficient to restore the immediately prior ratings of the Swap Certificates (determined without regard to any financial guaranty insurance policy, if applicable). All collateral posted by Party A shall be returned to Party A immediately upon Party A securing a substitute counterparty that satisfies the Swap Counterparty Ratings Requirement.

  • Index Debt Rating means the S&P Rating, the Xxxxx’x Rating and the Fitch Rating.

  • Long-Term Rating means, for any entity (a) in the case of Moody’s, the long-term senior unsecured debt rating of such entity and (b) in the case of S&P, the long-term issuer credit rating of such entity.

  • Level III means a level of detail in the CPM Schedule which is an implementation (control) schedule used to direct the Work by providing schedule parameters to the more detailed implementation level, identify and resolve schedule problems, status progress in terms of Milestones, measure the impact of scope changes and delays, develop recovery plans, and support schedule-related contractual action. The work breakdown structure in the Level III CPM Schedule is at an area level, and shall involve over two thousand (2,000) activities. The Level III CPM Schedule is developed with the assistance of and accepted by Contractor’s Key Personnel. All Major Equipment (including bulk material requirements) are scheduled at area level and detailed construction activities at each commodity level follow the same area concept. The Subcontract schedules are similarly developed for each area, as applicable.

  • BBB by Standard & Poor's or "Baa2" by Moody's, as promptly as practicabxx xxx in any case within 90 days of the event, the Master Servicer shall, at its expense, either

  • Pricing Level II shall exist on an Adjustment Date if the Consolidated Leverage Ratio for the relevant period is less than 3.50 to 1.00 but greater than or equal to 3.00 to 1.00.

  • S&P Rating means, at any time, the rating issued by S&P and then in effect with respect to the Borrower’s senior unsecured long-term public debt securities without third-party credit enhancement (it being understood that if the Borrower does not have any outstanding debt securities of the type described above but has an indicative rating from S&P for debt securities of such type, then such indicative rating shall be used for determining the “S&P Rating”).

  • Level I Pricing applies on any day on which the Borrower’s long-term debt is rated A+ or higher by S&P or A1 or higher by Moody’s.

  • Pricing Level III shall exist on an Adjustment Date if the Consolidated Leverage Ratio for the relevant period is less than 3.00 to 1.00 but greater than or equal to 2.50 to 1.00.

  • Highest Rating Category means, with respect to an Eligible Investment, that the Eligible Investment is rated by S&P or Moody’s in the highest rating given by that rating agency for that general category of security. By way of example, the Highest Rating Category for tax-exempt municipal debt established by S&P is “A-1+” for debt with a term of one year or less and “AAA” for a term greater than one year, with corresponding ratings by Moody’s of “MIG-1” (for fixed rate) or “VMIG-1” (for variable rate) for three months or less and “Aaa” for greater than three months. If at any time (a) the Bonds are not rated, (b) both S&P and Moody’s rate an Eligible Investment and (c) one of those ratings is below the Highest Rating Category, then such Eligible Investment will, nevertheless, be deemed to be rated in the Highest Rating Category if the lower rating is no more than one rating category below the highest rating category of that rating agency. For example, an Investment rated “AAA” by S&P and “Aa3” by Xxxxx’x is rated in the Highest Rating Category. If, however, the lower rating is more than one full rating category below the Highest Rating Category of that rating agency, then the Eligible Investment will be deemed to be rated below the Highest Rating Category. For example, an Eligible Investment rated “AAA” by S&P and “A1” by Xxxxx’x is not rated in the Highest Rating Category.

  • Pricing Level I shall exist on an Adjustment Date if the Consolidated Leverage Ratio for the relevant period is greater than or equal to 3.50 to 1.00.

  • BBBEE means broad-based black economic empowerment as defined in section 1 of the Broad-Based Black Economic Empowerment Act;