Examples of Nominal pressure in a sentence
The first applicant was summoned to appear in court for questioning on 25 September 2008.
Each valve body shall be permanently marked with the following information: Nominal Size Nominal pressure rating Type of Valve Manufacturers name or Trade mark Sl. Number and year of manufacture.
Design validation data from Ballard (a) Nominal pressure drop of reactants within the fuel cell, (b) Reactant inlet pressures corresponding to current drawn.During PEMFC steady-state operations, coolant pressure should be lower than reactant pressures whereas during start-up, coolant pressure may exceed reactant pressure.
Marking According to EN 19 every valve is marked with the following data: A Charge numberB Tag plate 12345C Part number4408PN 40D Nominal pressure [PN] E Manufacturer’s signDN32F Material number G Nominal diameter [DN] Valves which are covered by the pressure equipment directive 2014/68/EU (> DN 25 / 1”) are additionally marked with a non-removable CE-identification tag plate.
The following information shall be cast on each valve body: - Manufacturers’ Name or trade mark - Nominal pressure of valve - Size of Valve - Year of manufacture - Serial number in punch on top of flanges Valves shall be tested for Hydro-static test and flaw detection test in accordance with IS: 14846.
Valves shall be marked as follows:• The name and address or other means of identification of the manufacturer and, where appropriate, of his authorized representative established within the Community• Nominal diameter• Nominal pressure class• Casing material• Flow direction arrow• Identification-no.
The following information shall be cast on each valve body: - Manufacturers’ Name or trade mark - Nominal pressure of valve (PN 1.0 or 1.6) - Size of Valve - Year of manufacture - Serial number in punch on top of flanges Valves shall be tested for Seat leakage test, Body hydrostatic test, Valve operation and flaw detection test in accordance with IS: 14846.
Both the inlets and the outlets arePipes Nominal pressure drop (Pa)CVW1Heat ExchangersCryolineW2 140 44FeederinC 20 39FeederoutC 25 39CryolineC1 30 39CryolineC2 30 39Bath temperature (K) Heat transfer area (m2)HXW 4.5 37HXC 4.5 37located on the outboard equatorial plane, see Fig.
Nominal pressure (PN); The manufacturer’s full technical specifications shall be supplied to the Engineer by the Contractor for approval prior to confirmation of any order for valves.
Nominal pressure level as defined in DIN EN ISO 10380: maximum permissible pres- sure as defined in DIN EN ISO 10380 roun- ded to the associated pressure level.