Minimum Standards for Local Detention Facilities definition

Minimum Standards for Local Detention Facilities means those regulations within Title 15, Division 1, Subchapter 4, Section 1000 et seq. of the California Code of Regulations and Title 24, Part 1, Section 13-102, and Part 2, Section 470A of the California Code of Regulations, asadopted by the Corrections Standards Authority.
Sample 1Sample 2Sample 3
Minimum Standards for Local Detention Facilities means those regulations within Title 15, Division 1, Subchapter 4, Section 1000 et. seq. of the California Code of Regulations and
Sample 1

Examples of Minimum Standards for Local Detention Facilities in a sentence

  • Identify the importance of the Minimum Standards for Local Detention Facilities as defined in Title 15.

  • Deficiencies in compliance with the operational and physical plant requirements in the Minimum Standards for Local Detention Facilities in Title 15, CCR, Division 1, Chapter 1, Subchapter 4 and Title 24, CCR, Part 1, Section 13-102 and Part 2, Section 1231 and construction materials shall be corrected by the county prior to advertising for bids.

  • I am familiar with the California Board of State and Community Corrections Title 15 Minimum Standards for Local Detention Facilities.

  • Deficiencies in compliance with the operational and physical plant requirements in the Minimum Standards for Local Detention Facilities in Title, 15, CCR, Division 1, Chapter 1, Subchapter 4 and Title 24, CCR, Part 1, Section 13-102 and Part 2, Section 1231 and construction materials shall be corrected prior to completion of construction.

  • Unless otherwise specified in statute or these regulations, minors lawfully held in local adult detention facilities shall be subject to the regulations and statutes governing those facilities found in Minimum Standards for Local Detention Facilities, Title 15, Division 1, Chapter 1, Subchapter 4, Section 1000 et seq.

  • The Board of State and Community Corrections Minimum Standards for Local Detention Facilities as found in Title 15 of the California Code of Regulations.

  • The California Administrative Code, Title 15 – Minimum Standards for Local Detention Facilities, §1072 and the California Penal Code §6030 mandates specific services relative to the religious and spiritual welfare of inmates and legislates that all prisoners shall be afforded reasonable opportunities to exercise religious freedom.

  • The different types of facilities are evaluated based upon the appropriate respective edition of the Minimum Standards for Local Detention Facilities in South Carolina that applies in terms of square footage: ratio of toilets, sinks, showers, etc., dayroom space, and other circumstances that impact living conditions.

  • All aspects of the proposed food services management services must conform with applicable federal, state, and local guidelines; standards and guidelines of the California Code of Regulations (CCR), Title 15, Minimum Standards for Local Detention Facilities; and guidelines relating to food service management in Adult Detention Facilities in the State of California, as well as regulations pertaining to juvenile meals and mental health facility meals.

  • Title 15, Minimum Standards for Local Detention Facilities, Article 11, Medical/Mental Health Services, Sec.

Related to Minimum Standards for Local Detention Facilities

  • State minimum standards means minimum requirements

  • PJM Region Reliability Requirement means, for purposes of the Base Residual Auction, the Forecast Pool Requirement multiplied by the Preliminary PJM Region Peak Load Forecast, less the sum of all Preliminary Unforced Capacity Obligations of FRR Entities in the PJM Region; and, for purposes of the Incremental Auctions, the Forecast Pool Requirement multiplied by the updated PJM Region Peak Load Forecast, less the sum of all updated Unforced Capacity Obligations of FRR Entities in the PJM Region.

  • Minimum Standards means standards of practice that interpret the legal definition of nursing as well as provide criteria against which violations of the law can be determined.

  • NERC Reliability Standards means the most recent version of those reliability standards applicable to the Generating Facility, or to the Generator Owner or the Generator Operator with respect to the Generating Facility, that are adopted by the NERC and approved by the applicable regulatory authorities, which are available at xxxx://xxx.xxxx.xxx/files/Reliability_Standards_Complete_Set.pdf, or any successor thereto.

  • Applicable water quality standards means all water quality standards to which a discharge is subject under the federal Clean Water Act and which has been (a) approved or permitted to remain in effect by the Administrator following submission to the Administrator pursuant to Section 303(a) of the Act, or (b) promulgated by the Director pursuant to Section 303(b) or 303(c) of the Act, and standards promulgated under (APCEC) Regulation No. 2, as amended.

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • Applicable Technical Requirements and Standards means those certain technical requirements and standards applicable to interconnections of generation and/or transmission facilities with the facilities of an Interconnected Transmission Owner or, as the case may be and to the extent applicable, of an Electric Distributor, as published by Transmission Provider in a PJM Manual provided, however, that, with respect to any generation facilities with maximum generating capacity of 2 MW or less (synchronous) or 5 MW or less (inverter-based) for which the Interconnection Customer executes a Construction Service Agreement or Interconnection Service Agreement on or after March 19, 2005, “Applicable Technical Requirements and Standards” shall refer to the “PJM Small Generator Interconnection Applicable Technical Requirements and Standards.” All Applicable Technical Requirements and Standards shall be publicly available through postings on Transmission Provider’s internet website.

  • Accessibility Standards means accessibility standards and specifications for Texas agency and institution of higher education websites and EIR set forth in 1 TAC Chapter 206 and/or Chapter 213.

  • Quality Standards means the quality standards published by BSI British Standards, the National Standards Body of the United Kingdom, the International Organisation for Standardisation or other reputable or equivalent body, (and their successor bodies) that a skilled and experienced operator in the same type of industry or business sector as the Contractor would reasonably and ordinarily be expected to comply with, and as may be further detailed in the Specification.

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • Environmental and Social Standards or “ESSs” means, collectively:

  • Locational Deliverability Area Reliability Requirement means the projected internal capacity in the Locational Deliverability Area plus the Capacity Emergency Transfer Objective for the Delivery Year, as determined by the Office of the Interconnection in connection with preparation of the Regional Transmission Expansion Plan, less the minimum internal resources required for all FRR Entities in such Locational Deliverability Area.

  • General air quality operating permit or "general permit" means an air quality operating permit that meets the requirements of ARM 17.8.1222, covers multiple sources in a source category, and is issued in lieu of individual permits being issued to each source.

  • Applicable Standards means the requirements and guidelines of NERC, the Applicable Regional Entity, and the Control Area in which the Customer Facility is electrically located; the PJM Manuals; and Applicable Technical Requirements and Standards.

  • Reliability Standards means the criteria, standards, rules and requirements relating to reliability established by a Standards Authority.

  • Ambient air quality standard means an established concentration, exposure time, and frequency of occurrence of air contaminant(s) in the ambient air which shall not be exceeded.

  • Compliance schedule means a schedule of events, by date, which will result in compliance with these regulations.

  • Safety Standards means all laws, union rules and trade or industry custom or codes of any kind whatsoever, in effect from the date of this Agreement through Final Acceptance of the construction work, pertaining to worker safety and accident prevention applicable to the Project and/or the construction work (including, but not limited to, rules, regulations and standards adopted pursuant to the Occupational Safety and Health Act of 1970, as amended from time to time).

  • Specified anatomical areas means and includes:

  • NYSRC Reliability Rules means the rules applicable to the operation of the New York Transmission System. These rules are based on Reliability Standards adopted by NERC and NPCC, but also include more specific and more stringent rules to reflect the particular requirements of the New York Transmission System.

  • Environmental and Social Impact Assessment or “ESIA” means a site-specific report, to be prepared in accordance with the parameters laid down in the ESMF (as hereinafter defined) and acceptable to the Association, identifying and assessing the potential environmental and social impacts of the activities to be undertaken for the Project, evaluating alternatives, and designing appropriate mitigation, management, and monitoring measures.

  • Service Level Standards has the meaning ascribed thereto in Section 2.1 hereof.

  • National Ambient Air Quality Standards or “NAAQS” means national ambient air quality standards that are promulgated pursuant to Section 109 of the Act, 42 U.S.C. § 7409.

  • Water quality standards means provisions of state or federal law which consist of a designated use or uses for the waters of the Commonwealth and water quality criteria for such waters based upon such uses. Water quality standards are to protect the public health or welfare, enhance the quality of water and serve the purposes of the State Water Control Law (§ 62.1-44.2 et seq. of the Code of Virginia) and the federal Clean Water Act (33 USC § 1251 et seq.).

  • Quality Management System means a set of interrelated or interacting elements that organisations use to direct and control how quality policies are implemented and quality objectives are achieved;

  • Environmental and Social Standard 8: Cultural Heritage”; (ix) “Environmental and Social Standard 9: Financial Intermediaries”; (x) “Environmental and Social Standard 10: Stakeholder Engagement and Information Disclosure”; effective on October 1, 2018, as published by the Bank.