Mercury and Air Toxics Standards definition

Mercury and Air Toxics Standards or “MATS” means the requirements established by EPA in 40 CFR Parts 60 and 63 regarding limits of power plant emissions of toxic air pollutants (February 16, 2012).
Sample 1Sample 2Sample 3
Mercury and Air Toxics Standards or “MATS” means the requirements established by EPA in
Sample 1Sample 2

Examples of Mercury and Air Toxics Standards in a sentence

  • The 2030 Agenda for Sustainable Development commits to ‘leave no one behind’ and ‘reach the furthest behind first’, and specifically references ‘people affected by humanitarian emergencies’ recognising that targets will not be reached without concerted efforts in conflict-affected and fragile states (UN, 2015).

  • In 2015, OUC implemented a cost-effective solution that ensures compliance with the EPA’s regulation on Mercury and Air Toxics Standards (MATS).

  • The decline in mercury is noteworthy given the recent controversy of the Mercury and Air Toxics Standards (MATS) policy that would regulate mercury from coal-fired power plants.

  • The drop in reserve margin beginning in 2015 is primarily attributable to the assumed retirement of coal generation due to environmental regulations (i.e., the implementation of the Mercury and Air Toxics Standards, “MATS,” in 2016) and fuel prices.

  • Please complete the following chart regarding MATS-related costs: YearEstimated Cost of Mercury and Air Toxics Standards (MATS) Rule Impacts (2019 $ millions)Capital CostsO&M CostsFuel CostsTotal Costs If the answer to any of the above questions is not available, please explain why.

  • Increasingly difficult-to-meet federal and local environmental regulations - Mercury and Air Toxics Standards (MATS), Clean Power Act and Interstate pollution regulations, etc.

  • On December 21, 2011, the EPA issued its Mercury and Air Toxics Standards rule (MATS), which applies the CAA maximum achievable control technology (MACT) requirement to new or modified sources of emissions of mercury and arsenic, acid gas, nickel, selenium and cyanide.

  • Likewise, Murray Energy Corporation, petitioner in the related cases 14-1112 and 14-1151, has recently filed a brief supporting a Supreme Court challenge to the Mercury and Air Toxics Standards rule, arguing, “Section 111 is far more flexible and less costly than Section 112 because Section 111 would allow state and local governments to continue to tailor their power generation fleets to address differing local circumstances.” Br. of Murray Energy Corp.

  • EPA released the proposed Mercury and Air Toxics Standards for power plants on March 16, 2011.

  • Beginning in 2015, however, SO2 emissions will fall as a result of the Mercury and Air Toxics Standards (MATS) for power plants, which were announced by EPA on December 21, 2011.

Related to Mercury and Air Toxics Standards

  • National Ambient Air Quality Standards or “NAAQS” means national ambient air quality standards that are promulgated pursuant to Section 109 of the Act, 42 U.S.C. § 7409.

  • Ambient air quality standard means an established concentration, exposure time, and frequency of occurrence of air contaminant(s) in the ambient air which shall not be exceeded.

  • Water quality standards means provisions of state or federal law which consist of a designated use or uses for the waters of the Commonwealth and water quality criteria for such waters based upon such uses. Water quality standards are to protect the public health or welfare, enhance the quality of water and serve the purposes of the State Water Control Law (§ 62.1-44.2 et seq. of the Code of Virginia) and the federal Clean Water Act (33 USC § 1251 et seq.).

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • Applicable Technical Requirements and Standards means those certain technical requirements and standards applicable to interconnections of generation and/or transmission facilities with the facilities of an Interconnected Transmission Owner or, as the case may be and to the extent applicable, of an Electric Distributor, as published by Transmission Provider in a PJM Manual provided, however, that, with respect to any generation facilities with maximum generating capacity of 2 MW or less (synchronous) or 5 MW or less (inverter-based) for which the Interconnection Customer executes a Construction Service Agreement or Interconnection Service Agreement on or after March 19, 2005, “Applicable Technical Requirements and Standards” shall refer to the “PJM Small Generator Interconnection Applicable Technical Requirements and Standards.” All Applicable Technical Requirements and Standards shall be publicly available through postings on Transmission Provider’s internet website.

  • Safety Standards means all laws, union rules and trade or industry custom or codes of any kind whatsoever, in effect from the date of this Agreement through Final Acceptance of the construction work, pertaining to worker safety and accident prevention applicable to the Project and/or the construction work (including, but not limited to, rules, regulations and standards adopted pursuant to the Occupational Safety and Health Act of 1970, as amended from time to time).

  • Accessibility Standards means accessibility standards and specifications for Texas agency and institution of higher education websites and EIR set forth in 1 TAC Chapter 206 and/or Chapter 213.

  • Clean air standards, as used in this clause, means:

  • Applicable water quality standards means all water quality standards to which a discharge is subject under the federal Clean Water Act and which has been (a) approved or permitted to remain in effect by the Administrator following submission to the Administrator pursuant to Section 303(a) of the Act, or (b) promulgated by the Director pursuant to Section 303(b) or 303(c) of the Act, and standards promulgated under (APCEC) Regulation No. 2, as amended.

  • Quality Standards means the quality standards published by BSI British Standards, the National Standards Body of the United Kingdom, the International Organisation for Standardisation or other reputable or equivalent body, (and their successor bodies) that a skilled and experienced operator in the same type of industry or business sector as the Contractor would reasonably and ordinarily be expected to comply with, and as may be further detailed in the Specification.

  • Reliability Standards means the criteria, standards, rules and requirements relating to reliability established by a Standards Authority.

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • Technical Standards means the technical standards set out in paragraph 2.4 of the Order Form;

  • NERC Reliability Standards means the most recent version of those reliability standards applicable to the Generating Facility, or to the Generator Owner or the Generator Operator with respect to the Generating Facility, that are adopted by the NERC and approved by the applicable regulatory authorities, which are available at xxxx://xxx.xxxx.xxx/files/Reliability_Standards_Complete_Set.pdf, or any successor thereto.

  • Clean water standards, as used in this clause, means any enforceable limitation, control, condition, prohibition, standard, or other requirement promulgated under the Water Act or contained in a permit issued to a discharger by the Environmental Protection Agency or by a State under an approved program, as authorized by Section 402 of the Water Act (33 U.S.C. 1342), or by local government to ensure compliance with pre-treatment regulations as required by Section 307 of the Water Act (33 U.S.C. 1317).

  • General air quality operating permit or "general permit" means an air quality operating permit that meets the requirements of ARM 17.8.1222, covers multiple sources in a source category, and is issued in lieu of individual permits being issued to each source.

  • Radiopharmaceutical quality assurance means, but is not limited to, the performance of appropriate chemical, biological, and physical tests on potential radiopharmaceuticals and the interpretation of the resulting data to determine their suitability for use in humans and animals, including internal test assessment, authentication of product history, and the keeping of proper records.

  • Specifications and Standards means the specifications and standards relating to the quality, quantity, capacity and other requirements for the Project, as set forth in Schedule-D, and any modifications thereof, or additions thereto, as included in the design and engineering for the Project submitted by the Developer to, and expressly approved by, the Authority;

  • Generally applicable environmental radiation standards means standards issued by the U.S. Environmental Protection Agency (EPA) under the authority of the Atomic Energy Act of 1954, as amended, that impose limits on radiation exposures or levels, or concentrations or quantities of radioactive material, in the general environment outside the boundaries of locations under the control of persons possessing or using radioactive material.

  • International air transportation means transportation by air between a place in the United States and a place outside the United States or between two places both of which are outside the United States.

  • Applicable effluent standards and limitations means all State and Federal effluent standards and limitations to which a discharge is subject under the Act, including, but not limited to, effluent limitations, standards of performance, toxic effluent standards and prohibitions, and pretreatment standards.

  • Safety Management System means a systematic approach to managing safety, including the necessary organizational structures, accountabilities, policies and procedures;

  • Environmental Standards means regulations or certification specifications governing the certification of designs with regard to noise characteristics and exhaust emissions of civil aeronautical products and appliances.

  • international air transport means air transport that passes through the airspace over the territory of more than one State;

  • health and safety specification means a site, activity or project specific document prepared by the client pertaining to all health and safety requirements related to construction work;

  • Aviation gasoline means fuel designed for use in the operation of aircraft other than jet aircraft,