Pretreatment means the reduction of the amount of pollutants, the elimination of pollutants, or the alteration of the nature of pollutant properties in wastewater prior to or in lieu of discharging or otherwise introducing such pollutants into a POTW.
Material safety data sheet or "MSDS" means the chemical, physical, technical, and safety information document supplied by the manufacturer of the coating, solvent, or other chemical product, usually through the distribution network or retailers.
COGSA means the Carriage of Goods by Sea Act of the United States of America approved on 16th April 1936.
Transportation network company driver or “driver” means an
TELRIC means Total Element Long-Run Incremental Cost.
Homecare Worker means a provider, as described in OAR 411-031- 0040, that is directly employed by a consumer to provide either hourly or live-in services to the eligible consumer.
Environmental and Social Management Plan or “ESMP” means a site-specific environmental and social management plan to be prepared in accordance with the parameters laid down in the ESMF and acceptable to the Association, setting forth a set of mitigation, monitoring, and institutional measures to be taken during the implementation and operation of the Project activities to eliminate adverse environmental and social impacts, offset them, or reduce them to acceptable levels, and including the actions needed to implement these measures.
Cosmetology means any one and/or combination of practices generally and usually performed by and known as the occupation of beauty culturalist, cosmeticians, cosmetologists or hairdressers or any person holding him or herself out as practicing cosmetology in or upon a place or premises. Cosmetology shall include, but otherwise not be limited to, the following: embellishing, arranging, dressing, curling, waving, cleansing, beautifying, cutting, singeing, bleaching, coloring, or similar work upon the hair of any person by any means and with hands or mechanical or electrical apparatuses, devices or appliances or by use of cosmetic preparations, antiseptics, tonics, lotions, creams or otherwise, massaging, cleansing, stimulating, manipulating, exercising, beautifying or similar work, the scalp, face, neck, arms, hands, bust or upper part of the body, or manicuring, pedicuring or sculpting the nails of any person.
Biological safety cabinet means a containment unit suitable for the preparation of low to moderate risk agents where there is a need for protection of the product, personnel, and environment, according to National Sanitation Foundation (NSF) Standard 49.
Recycling means the series of activities by which materials that are no longer useful to the generator are collected, sorted, processed, and converted into raw materials and used in the production of new products. This definition excludes the use of these materials as a fuel substitute or for energy production.
Asbestos-containing material or “ACM” means asbestos or any material containing more than one percent (1%) asbestos as determined using methods specified in 40 CFR 763, Subpart E, Appendix E, Section I, Polarized Light Microscopy* including Category I and Category II ACM and all friable material.
coronavirus means severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2);
Cannabidiol means a finished preparation containing, of its total cannabinoid content, at least 98 percent cannabidiol and not more than 0.90 percent tetrahydrocannabinol by volume that has been extracted from marijuana or synthesized in a laboratory.
Transportation network company means a company or organization facilitating and/or providing transportation services using a computer or digital application or platform to connect or match passengers with drivers for compensation or a fee.
Snow tyre means a tyre whose tread pattern, tread compound or structure is primarily designed to achieve in snow conditions a performance better than that of a normal tyre with regard to its ability to initiate or maintain vehicle motion."
Polystyrene foam means blown polystyrene and expanded and
Remanufacturing means the activity of overhauling, retrofitting, fabricating, or repairing a product or its component parts for ultimate sale at retail.
Plagiarism means to take and present as one's own a material portion of the ideas or words of another or to present as one's own an idea or work derived from an existing source without full and proper credit to the source of the ideas, words, or works. Plagiarism includes, but is not limited to:
Pretreatment coating means a coating which contains no more than 12% solids by weight, and at least 0.5% acid by weight, is used to provide surface etching, and is applied directly to metal surfaces to provide corrosion resistance, adhesion, and ease of stripping.
SAQA means the South African Qualifications Authority;
Cannabis means all parts of the plant Cannabis sativa Linnaeus, Cannabis indica, or Cannabis ruderalis, whether growing or not; the seeds thereof; the resin, whether crude or purified, extracted from any part of the plant; and every compound, manufacture, salt, derivative, mixture, or preparation of the plant, its seeds, or resin. “Cannabis” also means the separated resin, whether crude or purified, obtained from cannabis. “Cannabis” does not include the mature stalks of the plant, fiber produced from the stalks, oil or cake made from the seeds of the plant, any other compound, manufacture, salt, derivative, mixture, or preparation of the mature stalks (except the resin extracted therefrom), fiber, oil, or cake, or the sterilized seed of the plant which is incapable of germination. For the purpose of this division, “cannabis” does not mean “industrial hemp” as defined by Section 11018.5 of the Health and Safety Code. Cannabis and the term “marijuana” may be used interchangeably.